• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.51-58
• /
• 2015

Thirty one of Staphylococcus aureus isolated from perilla leaf cultivation areas in Miryang were investigated on the characteristics, such as enterotoxin genes and antibiotic susceptibility. Five toxin genes (sea, seb, sec, sed, and see) were examined by PCR method. Disc diffusion method was used to examine the antibiotic susceptibility of S. aureus by using 18 types of antibiotic discs with different concentrations. Among enterotoxin-encoding genes, sea and sed genes were co-detected from 4 isolates (12.9%), sed gene was founded in 9 isolates (29.0%), and see gene was founded in 1 isolate (3.2%). However seb and sec and tsst were not detected in any isolates. As a result of antibiotic susceptibility test, 7 isolates (22.6%) were resistant to 12 antibiotics (penicillin, ampicillin, oxacillin, amoxicillin-clavulanic acid, cefazolin, cephalothin, imipenem, gentamicin, tetracycline, ofloxacin, norfloxacin, and erythromycin). 2 isolates (6.5%) were resistant to 5 antibiotics (penicillin, ampicillin, amoxicillin-clavulanic acid, gentamycin, and telithromycin). MRSA (Methicilline Resistant Staphylococcus aureus) was founded in packing vinyl, hands, and perilla leaves.

• Animal cells and systems
• /
• v.16 no.2
• /
• pp.127-134
• /
• 2012

We investigated the effects of fadrozol, an aromatase inhibitor (AI), and $17{\alpha}$-methyltestosterone (MT) on the induction of sex change in juvenile longtooth grouper $Epinephelus$ $bruneus$, via histological observation of gonads. Changes in the mRNA expression of GtH subunits (FSH-${\beta}$ and LH-${\beta}$) in the pituitary, and estradiol-$17{\beta}$ (E2) and 11-ketotestosterone (11-KT) levels in the blood were also surveyed after AI and MT treatment. Juvenile longtooth groupers ($113{\pm}17g\;body\;weight$; $16.2{\pm}1.2cm\;body\;length$) received intramuscular injections of AI at 3 (3-AI) and 5 (5-AI) mg/kg BWdoses and MT at a 5 mg/kg BW (5-MT) dose. At week 7 post-injection, 3-AI and 5-MT oocytes were degenerated, and gonads of the 5-AI group initiated spermatogenesis. At week 21 post-injection, 3-AI- and 5-MT-treated gonads contained spermatogonia and spermatocytes, while 5-AI treatment induced advanced stages of spermatogenesis. The serum E2 level showed no significant differences throughout the experimental period, whereas that of 11-KT was significantly elevated in the 5-AI group at weeks 7 and 21 post-injection. A significant increase in the expression of FSH-${\beta}$ mRNA was evident in the 5-AI group at week 21 post-injection. In contrast, LH-${\beta}$ mRNA expression did not significantly differ among groups during the experimental period. These results imply that sex change has two stages in the longtooth grouper. In the first stage, oocytes are degenerated by the stimulation by 11-KT, and in the second stage spermatogenesis occurs, owing to the co-effects of 11-KT and FSH-${\beta}$.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.433-439
• /
• 2017

Urban railway tunnels are polluted by resuspension of deposited bottom dust or newly generated wear dust. A hybrid type dust collector consisting of a baffle and an electrostatic precipitator was developed to remove these types of airborne dust when trains are running in the tunnel. Since dust collection efficiency of the hybrid dust collector is inversely proportional to the airflow rate, the relationship between airflow rate and dust collection efficiency was experimentally investigated for two baffle models. Collection efficiencies for dust larger than $0.5{\mu}m$ for the hybrid dust collector model A1, operated at 3.4 m/s, were greater than 30%; those for the hybrid dust collector model A2, operated at 4.7 m/s, were higher than 20%. When the applied voltage was 13 kV, the amounts of $PM_{10}$ collected with model A1 and model A2 dust collectors were estimated at $253{\mu}g$ and $242{\mu}g$ per hour, respectively.

• Journal of the Korean Society for Heat Treatment
• /
• v.37 no.4
• /
• pp.163-171
• /
• 2024

SCR420H steel is a low-carbon chromium alloy steel designed for carburizing heat treatment. Recently, research is being conducted on high-temperature carburization heat treatment to reduce costs and CO₂ emissions by shortening the carburization time to meet the international carbon neutral policy. However, this high-temperature carburization heat treatment coarsens the steel grains and causes a decrease in mechanical properties. In this study, a large amount of Ti was added to increase the grain refinement effect in the high-temperature carburizing process. We investigated the microstructure and precipitates of SCR420H steel without Ti (Al steel) and with Ti (AlTi steel). Thermodynamic calculations showed that the AlN and (Ti,Nb)(C,N) precipitated in Al steel, while (Ti,Nb)(C,N) and Ti₄C₂S₂ precipitated in AlTi steel. Addition of Ti increases the fraction of bainite after reheating process. Transmission electron microscopy analysis shows that small amounts of AlN and (Ti,Nb)(C,N) precipitates are formed in the Al steel. The addition of Ti increases the density of (Ti,Nb)(C,N) precipitates and induces the formation of Ti₄C₂S₂ precipitates, increasing the grain coarsening temperature (GCT) under all heat treatment conditions. Higher reheating temperatures also resulted in higher GCT values due to increased precipitation.

• Korean Journal of Pharmacognosy
• /
• v.40 no.3
• /
• pp.196-204
• /
• 2009

This study was carried out to investigate the in vivo and in vitro inhibitory effect of a traditional herbal complex (HC) extract prepared from a mixture of four oriental herbs (Dioscorea Rhizoma, Glycine soja Sieb. et Zucc, Bombycis corpus, Fermented Glycine soja) that have been widely used for the treatment and prevention of diabetes mellitus on hyperglycemia. The water extract of HC showed potent inhibitory effect on $\alpha$-glucosidase with $IC_{50}$ value of 1.24 mg/mL. Additionally, the ethanol extract of HC was also found to exhibit significant inhibitory effect against protein tyrosine phosphatase $1{\beta}$ ($PTP1{\beta}$), which is known as a major regulator of both insulin and leptin signaling. In the $PTP1{\beta}$ inhibitory assay, the most active n-hexane fraction obtained from the ethanol extract of HC, was identified as a mixture of fatty acid derivatives by gas chromatography-mass spectrometry (GC-MS). In high-fat diet-low dose streptozotocin (STZ)-induced diabetic rat, the water extract of HC improved the oral glucose intolerance as compared with rosiglitazone. HC also caused a marked decrease of body weight and fasting blood glucose and a significant improvement on glucose tolerance in metabolic syndrome mice model. These findings support that this traditional HC may be useful in the control of blood glucose in diabetes mellitus and metabolic syndrome.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.955-962
• /
• 2016

Fish-meat gel is an intermediate product used in a variety of surimi-based seafood. One of the most-used raw materials of fish-meat gel is Alaska Pollock due to its high-quality meat in terms of gel strength and texture. However, increasing demand for fish-meat gel, along with overexploitation of the wild catch Alaska Pollock, has put the industry in need of low-cost sustainable alternative sources for fish-meat gel. Pagrus major (PM) is a widely aquacultured fish known for having white meat that is low in fat. The current study compares the quality of fish-meat gel prepared from aquacultured PM to that of high and mid-grade Alaska Pollock fish-meat gel. Gels were compared in terms of gel strength, texture, color, and protein pattern. Results indicated that fish-meat gels prepared from PM were superior to Alaska Pollock fish-meat gels with regard to gel strength, hardness, springiness, chewiness, cutting strength, and breaking force. In addition, although not matching in quality, PM exhibited a cohesiveness, whiteness, and expressible moisture content comparable to Alaska Pollock of both grades. Protein pattern analysis also showed that PM and Alaska Pollock fish-meat gels had similar protein profiles before and after gel preparation. Therefore, P. major is suggested as a potential substitute for Alaska Pollock in fish-meat gel production.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of Microbiology
• /
• v.44 no.6
• /
• pp.622-631
• /
• 2006

In this study we purified a fibrinolytic enzyme from Cordyceps militaris using a combination of ion-exchange chromatography on a DEAE Sephadex A-50 column, gel filtration chromatography on a Sephadex G-75 column, and FPLC on a HiLoad 16/60 Superdex 75 column. This purification protocol resulted in a 191.8-fold purification of the enzyme and a final yield of 12.9 %. The molecular mass of the purified enzyme was estimated to be 52 kDa by SDS-PAGE, fibrin-zymography, and gel filtration chromatography. The first 19 amino acid residues of the N-terminal sequence were ALTTQSNV THGLATISLRQ, which is similar to the subtilisin-like serine protease PR1J from Metarhizium anisopliae var. anisopliase. This enzyme is a neutral protease with an optimal reaction pH and temperature of 7.4 and $37^{\circ}C$, respectively. Results for the fibrinolysis pattern showed that the enzyme rapidly hydrolyzed the fibrin $\alpha$-chain followed by the $\gamma$-$\gamma$ chains. It also hydrolyzed the $\beta$-chain, but more slowly. The A$\alpha$, B$\beta$, and $\gamma$ chains of fibrinogen were also cleaved very rapidly. We found that enzyme activity was inhibited by $Cu^{2+}$ and $Co^{2+}$, but enhanced by the additions of $Ca^{2+}$ and $Mg^{2+}$ ions. Furthermore, fibrinolytic enzyme activity was potently inhibited by PMSF and APMSF. This enzyme exhibited a high specificity for the chymotrypsin substrate S-2586 indicating it's a chymotrypsin-like serine protease. The data we present suggest that the fibrinolytic enzyme derived from the edible and medicinal mushroom Cordyceps militaris has fibrin binding activity, which allows for the local activation of the fibrin degradation pathway.

• Publications of The Korean Astronomical Society
• /
• v.23 no.2
• /
• pp.91-107
• /
• 2008

In this paper, we introduce the performance evaluation and development of Raw VLBI Data Buffer(RVDB) system for the synchronized playback processing of observed data in Korea-Japan Joint VLBI Correlator(KJJVC). The high-speed correlation processing system is under development so that the radio data obtained with 8192 channels and 8 Gbps speed from 16 stations will be able to be processed. When the recorded data of each station are played to correlator, the time synchronization of each station is very important because the correlator should process the data obtained with same time and condition. There are many types of recorder systems in the East Asia VLBI Network (EAVN). Therefore it is required to prepare the special time synchronized playback processing system to synchronize the time tag of observed data. The developed RVDB system consists of Data Input Output(DIO), 10GbE switch, and Disk Data Buffer(DDB). It can record the data with maximum 2 Gbps speed, and can play back the data to correlator with nominal 2 Gbps speed. To enable to play back the data of different playback system to the correlator, we developed the high-speed time synchronized playback processing system. We carried out the experiments of playing back and correlation for gigabit correlator and VCS trial product so as to confirm the performance of developed time synchronized playback processing system. In case of online and offline playing back experiment for gigabit correlator, we confirmed that the online and offline correlation results were the same. In case of playing back experiment for VCS trial product, we verified that the wide band and narrow band correlation results were also the same. Through the playing back experiments of RVDB system, the effectiveness of developed RVDB system was verified. In this paper, the system design, construction and experimental results are shown briefly.

• Food Science of Animal Resources
• /
• v.30 no.1
• /
• pp.95-101
• /
• 2010

Folate loaded WPI (whey protein isolate) nanoparticles were prepared using the cold-induced gelation process. The aim of this work was to investigate the effects of process parameters, such as the concentration of the WPI solution, pH, temperature, etc, on the properties of nanoparticles. The results show that the smallest nanoparticles were obtained when a WPI concentration of 1% was used at a pH of 8.0 (<330 nm). In the case of the concentration of $CaCO_3$, the smallest particles were obtained at a concentration of 5 mM. Alginate produced the smallest mean size with the narrowest particle size distribution, while the largest particles were prepared with k-carrageenan. As the w:o ratio increased, the mean particle size also increased. When the release profile was analyzed, the particles were shown to be stable for more than 6 h at a pH of 1.2, where almost all of the folic acid was released within 2 h in the dissolution media of PBS at a pH of 7.4. Thus, the process parameters appear to be important factors that affect the properties of nanoparticles.