• 한국재료학회지
• /
• 제23권11호
• /
• pp.661-665
• /
• 2013

We investigated the characteristics of electroless plated Cu films on screen printed Ag/Anodized Al substrate. Cu plating was attempted using neutral electroless plating processes to minimize damage of the anodized Al substrate; this method used sodium hypophosphite instead of formaldehyde as a reducing agent. The basic electroless solution consisted of $CuSO_4{\cdot}5H_2O$ as the main metal source, $NaH_2PO_2{\cdot}H_2O$ as the reducing agent, $C_6H_5Na_3O_7{\cdot}2H_2O$ and $NH_4Cl$ as the complex agents, and $NiSO_4{\cdot}6H_2O$ as the catalyser for the oxidation of the reducing agent, dissolved in deionized water. The pH of the Cu plating solutions was adjusted using $NH_4OH$. According to the variation of pH in the range of 6.5~8, the electroless plated Cu films were coated on screen printed Ag pattern/anodized Al/Al at $70^{\circ}C$. We investigated the surface morphology change of the Cu films using FE-SEM (Field Emission Scanning Electron Microscopy). The chemical composition of the Cu film was determined using XPS (X-ray Photoelectron Spectroscopy). The crystal structures of the Cu films were investigated using XRD (X-ray Diffraction). Using electroless plating at pH 7, the structures of the plated Cu-rich films were typical fcc-Cu; however, a slight Ni component was co-deposited. Finally, we found that the formation of Cu film plated selectively on PCB without any lithography is possible using a neutral electroless plating process.

• 자원환경지질
• /
• 제24권4호
• /
• pp.335-346
• /
• 1991

It is observed that calcareous nodules of the Hwajeol Formation are locally skarnized in the Sangdong district, in which the skarn mineralization extends 5 Km westward from the Sangdong mine area to the Hwajeolchi area. After a hidden granite beneath the Sangdong mine was discovered by exploration drillings, the exploration teams of the Sangdong mine and the Korean Mining Promotion Corporation have assumed that the skarn nodule of the Hwajeol Formation was derived from emplacement of a granite in deep place and the occurrence of hidden ore bodies below the skarn, and they have discovered high grades of tungsten orebody in the same horizon of the Sangdong ore body. Mutual genetic relatioships between epidote and garnet may be explained by following chemical reactions $Ca_2FeA_{12}$ $Si_3O_{12}(OH)+CaCO_3=Ca_3(Fe,\;Al)_2$ $SiO_{12}+1/2CO_2+1/2H^+Ca_3FeSi_3O_{12}+SiO_2+CO_2=2CaFeSi_{12}O_6+CaCO_3+1/2O_3$. It is concluded that epidote and garnet are useful as target minerals indicating a potential occurrence of deep seated hidden ore body. Since the epidote may inform the emplacement of the granite, while the garnet in the skarn nodule of the Hwajeol Formation may reflect a strong hydrothermal mineralization taking place from the depth.

• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.363-368
• /
• 2006

$C_9$-알데히드를 수소화하여 $C_9$-알콜을 제조하는 공정에 사용하기 위한 최적의 촉매를 선정하고, $C_9$-알콜의 수율을 극대화하기 위한 운전 조건을 확립하기 위한 실험을 수행하였다. 구리 전구체로 acetate를 사용하고 침전제로 $Na_2CO_3$를 사용하여 제조한 $CuO/ZnO/Al_2O_3$(60:30:10 wt％) 촉매의 표면적 및 구리 비표면적이 가장 우수하였으며 $C_9$-알데히드 수소화 반응에서도 가장 우수한 성능을 보였다. 최적화된 촉매를 장착한 trickle bed 반응기를 사용하여 $175^{\circ}C$, 800 psi, $WHSV=3hr^{-1}$의 조건에서 94.1 wt％의 $C_9$-알콜 수율을 얻었다. 알데히드의 수소화 반응에 사용되는 다른 촉매들과 비교한 결과 Ni/kieselghur 촉매와 유사한 성능을 보였으며 $Cu-Ni-Cr-Na/Al_2O_3$ 촉매 및 $Ni-Mo/Al_2O_3$ 촉매의 경우보다 우수한 성능을 보이는 것을 확인하였다. 장기 촉매 테스트를 통해서 촉매의 안정성을 확인한 결과 약 72시간 이후에는 고비점 부산물의 생성량 증가로 인하여 $C_9$-알콜의 수율이 약간씩 감소하였다.

• 멤브레인
• /
• 제32권2호
• /
• pp.116-125
• /
• 2022

본 실험에서는 α-Al₂O₃ 세라믹 중공사를 지지체로 사용하였고, 무전해 도금을 통해 Pd 및 Pd-Ag가 도금된 수소 분리막을 제조하였다. Pd-Ag 분리막은 Pd와 Ag 합금 형태로 만들기 위하여 500℃, 10 h 동안의 annealing 과정을 거쳤으며, EDS (Energy Dispersive X-ray Spectroscopy) 분석을 통해 Pd-Ag 합금이 되었다는 것을 확인하였다. 또한, SEM (Scanning Electron Microscope) 분석을 통해 제조된 Pd 및 Pd-Ag 도금층의 두께는 약 8.98, 9.29 ㎛으로 측정되었다. 제조된 수소 분리막은 350~450℃, 1-4 bar의 범위에서 수소 단일 가스, 혼합가스(H₂, N₂)를 이용하여 수소 투과 실험을 진행하였다. 수소 단일 가스에서 Pd와 Pd-Ag 분리막은 최대 각각 21.85, 13.76 mL/cm²·min의 flux를 가지며, 혼합가스에서는 450℃, 4 bar의 조건일 때, 1216, 361의 separation factor가 각각 나오는 것을 확인하였다.

• Journal of Magnetics
• /
• 제2권4호
• /
• pp.116-122
• /
• 1997

To determine whether there is an ionic substitution of Ni, Co, Mn, and Al for Fe in synthetic goethites these materials have been studied by M$\ddot{o}$ssbauer spectroscopy at various temperatures ranging from 77 to 400 K. It is found that the presence of substituting elements in magnetically ordered structure of crystals may change the shape of M$\ddot{o}$ssbauer spectra of these caterials. The approximate distribution function of the effective magnetic field in the Fe nucleus p(Hn) is obtained from the M$\ddot{o}$ssbauer spectra. It is noted that the mean value of p(Hn) and its integral width can be taken as a measure of substitution in goethites.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.488-494
• /
• 2009

세제 빌더의 중요한 물성인 흡유능(O.A.C)을 향상시키기 위하여 새로운 합성방법인 2단계 결정화법을 이용하여 제올라이트 4A를 합성하였다. 즉, 기존의 원료인 cullet($SiO_2$)과 수산화알루미늄 대신에 베트남산 모래와 천연 보크사이트로부터 용출한 알루민산소다 용액을 활성탄소로 정제하여 사용하였고, 합성과정은 1단계는 Si/Al 몰비를 1.15로 조절하고 $55^{\circ}C$에서 4시간, 2단계는 알루미나 용액을 추가로 가하여 Si/Al 몰비를 0.98로 낮추고 $65^{\circ}C$에서 5시간 반응시켰다. 새로운 방법은 제올라이트 4A의 입도(평균 $1.2{\mu}m$)와 입자응집 및 표면극성을 더 잘 제어할 수 있었고, 백색도를 향상시켰다. 이렇게 합성된 제올라이트 4A는 기존제품과 비교하여 대등한 칼슘이온교환 능력을 가짐은 물론 100 g당 50 ml 이상의 우수한 흡유능력을 보여줌으로서 새로운 공정의 경제성 및 유효성이 검증되었다.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.560-567
• /
• 2016

본 연구에서는 $Ni/Al_2O_3$ 촉매의 수증기 개질반응 및 표면 특성을 조사하였다. 조촉매로써 선정된 Mo를 담지하여 제조한 Ni-Mo계 촉매를 Ni계 촉매와 반응활성 비교결과 효율증진 인자를 확인할 수 있다. $H_2$-TPR 및 XPS 분석을 통하여 효율이 저하되는 특성을 확인하였다. 수증기 개질반응 long run 실험 후 촉매표면에 침적된 carbon의 침적특성 및 결합구조, 기화특성을 확인하기 위하여 $O_2$-TPO 분석을 수행하였다. 본 연구를 통하여 수증기 개질반응에서 Ni과 강한 상호작용으로 결합하여 촉매의 반응활성 저하를 일으키는 graphitic carbon 종 형성을 억제함으로 Ni-Mo계 촉매에서 내구성이 증진됨을 확인할 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1546-1549
• /
• 2005

Al-doped ZnO (ZnO:Al) thin films were grown on corning 1737 glass substrates by dc magnetron sputtering. The structural, electrical and optical properties of the films were investigated as a function of various discharge power. The obtained films were polycrystalline with a hexagonal wurtzite structure and preferentially oriented in the (002) crystallographic direction. The lowest resistivity is $6.0{\times}10^{-4}$ Ocm with the carrier concentration of $2.694{\times}10^{20}$ $cm^{-3}$ and Hall mobility of $20.426cm^2/Vs$. The average transmittance in the visible range was above 90%.

• 한국표면공학회지
• /
• 제27권4호
• /
• pp.193-206
• /
• 1994

A wear behavior of electroless (Ni-P-X, X: SiC, $Al_2O_3$, Diamond) composite coating layers, formed under various conditions on commerical grade low carbon steel, has been investigated using Taber abrasion tester and scanning electron microscope. Several factors, which are type of particles, co-deposited content, particle size, distribution of particles and heat-treatment, influenced the wear resistance. The wear resistance of the composited coating layers after heat-treatment at $400^{\circ}C$ for 1 hr was increased 70 times with diamond, 15 times with SiC and 8 times with $Al_2O_3$, compared with the electroless nickel plating layer without heat-treatment.

• 한국표면공학회지
• /
• 제26권4호
• /
• pp.192-202
• /
• 1993

The characteristics of the high-performance ceramic coatings fabricated on the optimum processings con-ditions for the atmospheric plasma spraying are evaluated by various material tests and analyses. The opti-mum processing parameters for the plasma spraying are determined by using the two-level orthogonal arrays of fractional factorial testing method as a statistical approach. Material tests for the coating specimens are carried out to evaluate microstructure, hardness, adhesion strength, and deposition efficiency. The properties of Al2O3-13%TiO2 coating are discussed with regard to the effective processings parameters. The decarburization effects of WC-12%Co coating is examined by XRD analysis in terms of the arc power and the secondary gas species. The hardness of Al2O2-13%TiO2 coating is increased with the arc power and shows the maximum value at around 40 lpm of Ar gas flowrate, which appears to be the most critical parame-ter on the deposition efficiency. For reducing the decarburization of WC-12%Co coating, the injection of inert He gas instead of reactive H2 gas as a secondary gas is more effective than the dropping of arc power to lessen the plasma enthalpy.