• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.757-761
• /
• 2019

The catalytic yields of POM to hydrogen over M(1)-Ni(5)/AlCeO₃ (M = La, Ce, Y) were investigated using a fixed bed flow reactor under atmosphere. The crystal phase behavior of reduced La(1)-Ni(5)/AlCeO₃ catalysts before and after the reaction were studied via XRD analysis. FESEM and EDS analyses were further performed to show the uniformed distribution of La, Ni, and Ce metal particles on the catalyst surface. XPS results showed O^2-, O₂^2- species and metal ions such as Ce³⁺, Ce⁴⁺, La³⁺ and Ni²⁺ etc. were on the catalyst surface. When 1 wt% of La was added to Ni(5)/AlCeO₃ catalyst, Ni2p_3/2 and Ce3d_5/2 increased 52.7 and 6.3%, respectively. The yield of hydrogen on the La(1)-Ni(5)/AlCeO₃ catalyst was 89.1%, which was much better than that of M(1)-Ni(5)/AlCeO₃ (M = Ce, Y). As Ce⁴⁺ ions of CeO₂ produced by the reaction of AlCeO₃ with oxygen were substitute to La³⁺, it made oxygen vacancies in the lattice and further improved the hydrogen yield by increasing the dispersion of Ni atoms with strong metal-support interaction (SMSI) effect.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.297-303
• /
• 1998

The effect of aliovalent dopants, $ Nb_2O_5$ and MnO, on the phase stability of 12 mol% ceria partially-stabilized zirconia (Ce-TZP) polycrystals was studied. Both dopants (MnO and $ Nb_2O_5$) significantly increased the stability of the tetragonal zirconia phase (Mb temperature lower than liquid nitrogen temperature). The enhancement of the stability of the tetragonal phase in Ce-TZP doped with 1 mol% of Mno(Ce-TZP/MnO) andCe-TZP doped with 1 mol% of $ Nb_2O_5$(Ce-TZP/$ Nb_2O_5$) were explained by the significant reduction of the driving force, -${\Delta}$Gchem, for the tetragonal-to-mono-clinic phase transformation caused by the addition of MnO and $ Nb_2O_5$. The enhanced stability of the tetragonal phase in the Ce-TZP and Al2O3 composite (Ce-TZP/$Al_2O_3$) is believed to be caused by smaller grain size, moderate reduction in the chemical driving force and increase in the strain energy barrier to the transformation. Mechanical properties of the Ce-TZP and the Ce-TZP/$Al_2O_3$ with (i) the same grain size and (ii) the same Mb temperature were examined by measuring stress-strain behavior in 3 point bending. The Ce-TZP/$Al_2O_3$ composite doped with 1.3w% MnO (Ce-TZP/$Al_2O_3$/MnO), which had the same grain size as the Ce-TZP and De-TZP/$Al_2O_3$ showed more transformation plasticity than either the Ce-TZP or the Ce-TZP/$Al_2O_3$ composite. The Ce-TZP wihch had the same Mb temperature as that of the Ce-TZP/$Al_2O_3$/MnO did not show any transformation plasticity.

• The Korean Journal of Ceramics
• /
• v.7 no.2
• /
• pp.58-62
• /
• 2001

The relationship between the addition of Sb$_2$O$_3$ and the color difference by solarization in photosensitive glasses was investigated. Glasses containing CeO$_2$ and Sb$_2$O$_3$ simultaneously and glasses with only CeO$_2$ were changed reddish and yellowish respectively after exposing to ultra violet ray. Color difference between compositions was represented by dominant wavelength and purity. Since, in glasses containing CeO$_2$ and Sb$_2$O$_3$ simultaneously, Sb$_2$O$_3$ as reduction agent affected Ce$^3+$ ions to increase in glass and more Ce$^4+$ ions were induced than in glasses with only CeO$_2$ during UV irradiation, more electrons released by photo-ionization, which were color centers, were trapped by Ce$^4+$. In conclusion, the introduction of Sb$_2$O$_3$ to photosensitive glasses with CeO$_2$ resulted in the change of color center concentration in glasses and prevented the solarization of photosensitive glasses with CeO$_2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.435-435
• /
• 2011

The electronic structure and various physical properties of CeO2, Ce2O3, PrO2, and Pr2O3 have been studied from the framework of Ab-initio by the all-electron projector-augmented-wave (PAW) method, as implemented VASP (Vienna Ab-initio Simulation Package). The generalized gradient approximation (GGA) with effective U (Ueff) has been used to explain the strong on-site Coulomb repulsion among the localized Ce 4f electrons. The dependence of selected observables of these materials on the Ueff parameter has been scrutinized. The studied properties contain lattice constants, density of states, and reaction energies of CeO2, Ce2O3, PrO2, and Pr2O3. For CeO2 and PrO2, the GGA(PBE)+U results are in good agreement with experimental data whereas for the computational calculationally more demanding Ce2O3 and Pr2O3 both approaches give comparable accuracy. This results represent that by choosing an appropriate Ueff it is possible to reliably describe structural and electronic properties of CeO2, Ce2O3, PrO2, and Pr2O3, which enables modeling of oxygen reduction reaction processes involving ceria-based materials.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.2
• /
• pp.27-31
• /
• 2002

In this study, $CeO_2$ thin films were etched with an addition of $Cl_2$ gas to $Ar/CF_4$ gas mixing in an inductively coupled plasma (ICP) etcher by the etching parameter such as RF power of 700 W, chamber pressure of 15 mTorr and dc bias voltage of -200 volts. The etch rate of $CeO_2$ films was 250 $\AA$/min with an addition of 10% $Cl_2$ gas to $Ar/CF_4$ gas mixture and the selectivity to SBT film was 0.4 at that condition. The surface reactions of the etched $CeO_2$ thin films were investigated by X-ray photoelectron spectroscopy (XPS). It was analyzed that Ce peaks were mainly observed in Ce-O bonds formed $CeO_2$ or $Ce_2O_3$ compounds. Cl peaks were detected by the peaks of Cl $2p_{3/2}$ and Cl $2p_{1/2}$. Almost all of Cl atoms were combined with Ce atoms like $CeCl_x$ or $Ce_x/O_yCl_z$ compounds.

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.55-61
• /
• 1990

Effect of Al2O3 addition on the mechanical properties and microstructure of Ce-TZP were studied. 12, 14, 16Ce-TZP containing 0-40wt% Al2O3 were prepared by sintering at 155$0^{\circ}C$ for 2h. in air. Density, linear shrinkage, bending strength, Vickers hardness, microstructuer and the amount of stress induced phase transformation were examined. Vickers hardness increased linearly with increasing amounts of Al2O3. The amount of transformation and fracture toughness decreased linearly with increasing amount of Al2O3. Linear shrinkage and relative density decreased with increasing Al2O3 content in all composition of Ce-TZP. Grain growth of Ce-TZP was inhibited by Al2O3 dispersion and fracture mode of Ce-TZP/Al2O3 composites transformed from intergranular to transgranular fracture as the amount of Al2O3 increased. TEM observation revealed that Al2O3 particles were located mainly at grain boundaries of ZrO2.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.668-673
• /
• 2015

Alumina-based catalysts with different Ce loadings were studied in the decomposition of $CF_4$ using microwave heating system. Heating material of microwave system used Silicon Carbide. The crystallographic phases of catalysts were investigated by XRD and decomposition rates of $CF_4$ were examined by GC-TCD. The catalysts of 10 wt% Ce modified $Al_2O_3$ showed higher $CF_4$ decomposition rate than un-modified $Al_2O_3$ for $500^{\circ}C$ reaction temperature. The k value of catalysts shows the order of $Ce(20)/Al_2O_3=Ce(0)/Al_2O_3<Ce(5)/Al_2O_3<Ce(10)/Al_2O_3$. XRD patterns of $Ce(0)/Al_2O_3$ were no difference before and after the reaction and showed $Al_2O_3$ phases. With the increase in Ce loadings, $CeO_2$, $AlF_3$ of XRD peaks was observed. The results was indicated that Ce modifed $Al_2O_3$ than un-modifed $Al_2O_3$ was decreased reaction temperature to $200^{\circ}C$ with same decomposition rate. Also the appropriated cerium sulfate loadings on $Al_2O_3$ were 5~10 wt%.

• Journal of the Korean Ceramic Society
• /
• v.44 no.7
• /
• pp.387-392
• /
• 2007

Thermal conductivities in $La_2Ce_2O_7-Gd_2Ce_2O_7-Y_2Ce_2O_7$ ternary system have been investigated. Pyrochlore phases formed at all ternary compositions and their sinterbilities were decreased with La addition. Thermal conductivities showed a minimum value at $La_2Ce_2O_7$ with moderate increases as $Y^{3+}$ and $Gd^{3+}$ ions replaced $La^{3+}$. Thermal expansion anomaly observed in $La_2Ce_2O_7$, which might be detrimental to TBC application, were suppressed by $Y^{3+}$ and $Gd^{3+}$ additions, with resultant thermal conductivities, $1.3{\sim}1.5 W/mK$ at $1000^{\circ}C$.

• Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.131-137
• /
• 2005

The catalytic activity of precious metals(Rh, Pd, Pt) and nickel catalysts supported on ${\gamma}-Al_2O_3\;and\;CeO_2$ in the partial combustion of methane(PCM) to syngas was investigated based on the product distribution in a fixed bed now reactor under atmospheric condition and also on analysis results by SEM, XPS, TPD, BET, and XRD. The activity of the catalysts based on the syngas yield increased in the sequence $Rh(5)/CeO_2{\geq}Ni(5)/CeO_2>>Rh(5)/Al_2O_3>Pd(5)/Al_2O_3>Ni(5)/Al_2O_3$. Compared to the precious catalysts, the syngas yield and stability of the $Ni(5)/CeO_2$ catalyst were almost similar to $(5)/CeO_2$ catalyst, and superior to these of any other catalysts. The syngas yield of $Ni(5)/CeO_2$ catalyst was 90.66% at 1023 K. It could be suggested to be the redox cycle of the successive reaction and formation of active site, $Ni^{2-}$ and the lattice oxygen, $O^{2-}$ produced due to reduction of $Ce^{4-}$ to $Ce^{3-}$.

• Journal of the Korean Chemical Society
• /
• v.50 no.3
• /
• pp.232-236
• /
• 2006

The Y1.99-xMxCe0.01SiO5(M=Li, La, Nd, and Gd) phosphors were synthesized by solid-state reaction at 1350oC for 10h under reducing atmosphere in order to improve properties of blue emitting phosphors. Compared with commercial blue phosphors, the Y2SiO5:Ce blue phosphors substituted with various elements showed significant enhancement of the emission intensity. Particularly, 1 mol% Li doped Y2SiO5:Ce phosphors indicated the maximum emission intensity in the photoluminescence spectra. Thanks to SEM analyses revealed that the morphology of Y2SiO5:(Ce,Li) blue phosphors was a pseudo-spherical with particle size of 3m.