• Journal of the Korean Chemical Society
• /
• v.65 no.4
• /
• pp.249-253
• /
• 2021

Litter and manure were obtained at a cow house of a livestock farm in Andondg city. We examined the change of formation of nitrogen and phosphorous from these samples and tried to suggest a more useful and realistic way for removing them. Constituent and its content of sample were identified by XRF. NO₂^-, NO₃^-, and PO₄^3- ions and NH₄⁺, T-P and T-N released from sample were analyzed using ion chromatograph and UV/Vis spectrometry, respectively. As the results of this study, the ammonia nitrogen in the early stage of cow excretion is a need to make an ammonia gas state that can be immediately volatile by increasing the pH. Nitrogen and phosphorous, the main source of nutrition in green algal bloom can be removed by transforming insoluble salts such as calcium phosphate (CaHPO₄·3H₂O) and struvite (NH₄MgPO₄·6H₂O), respectively, with addition of Ca and Mg after stimulating fermentation of manure.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.339-346
• /
• 1998

Active belite cement clinkers were synthsized by using natural raw materials with borax and calcium phosphate ({{{{ {Ca }_{3 }( {PO}_{4}) }}2) In both case {{{{alpha ^、 {C }_{2 }S }} were formed but borax was more efficient. The cement syn-thesized with the addition of borax was hydrated with the addition of anhydrite(5 wt%) and slag(30wt%, 40wt% 50wt%) The addition of 50wt% slag with anhydrite was good for strength development in 7days and the compressive strength was developed to twice than no addition of slag at 28 days strength.

• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.677-682
• /
• 2007

This study was performed to provide the basic information on characteristics of groundwater pollution in Gyeongsan city. Forty two groundwater samples were collected, and pH, DO, COD, $NH_3-N,\;NO_3^--N$, T-N, $PO_4^{3-}-P$, Cl, Ca, Mg, hardness, evaporate residues and others were investigated. And, ANOVA analyses were carried out to reveal the differences in water pollution indicator values of by industry, commerce/residence and agriculture areas. The results were as follows. 1. The mean values of pH, DO, COD, $NH_3-N,\;NO_3^--N$, T-N, $PO_4^{3-}-P$, Cl, evaporate residues, Ca and hardness were 6.9, $7.9mg/\ell,\;0.4mg/\ell,\;2.44mg/\ell,\;2.73mg/\ell,\;6.06mg/\ell,\;0.82mg/\ell,\;32.72mg/\ell,\;381.67mg/\ell,\;41.53mg/\ell,\;177.17mg/\ell$, respectively. 2. As groundwater became deeper, the values of Cl, Ca, Mg, Na, hardness and evaporate residues remarkably increased, but those of COD, $NH_3^--N,\;NO_3^--N,\;NO_2^-N$, T-N decreased. 3. The values of COD, Cl, Ca, Mg, Na, hardness and evaporate residues were very high in industrial area, and those of $NH_3-N,\;NO_2^--N$, T-N were very high in commercial/residential area, and those of $NO_3^--N$ were a little high in agricultural area. 4. The correlations between depth and each value of Mg, Na, Fe, hardness and evaporate residues were highly positive, and those between DO and each value of Mg, Cu, Fe, hardness and evaporate residues were highly negative. 5. According to ANOVA analyses, the differences in three area groups (industry, commerce/residence and agriculture) on the values of $NH_3-N$, T-N, evaporate residues, hardness, Ca, Mg, K and Fe were significant at 1% level.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.3-26
• /
• 1999

We have successfully grown <111>-oriented (La,Sr)(Al,Ta)$O_3$(LSAT) mixed-perovskite single crystals and <0001>-oriented $Ca_8La_2(PO_4)_6O_2$(CLPA) single crystals with the apatite structure by the Czochralski method. The compositional and lattice parameter uniformity of the crystals are discussed in relation to the growth conditions. Since LSAT and CLPA single crystals have excellent lattice matching with GaN, they ar promising as new substrates for the growth of high quality GaN epitaxial layers.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.196-202
• /
• 2005

This research was conducted to determine the amount of water absorbed by a polyacrylamide hydrogel such as Stocksorb C (STSB), effect of salts on inhibition in hydration of STSB, and the hydrogel effects on changes of nutrient concentration in external solution. Absorption of deionized water by STSB reached a maximum of 180 $mL{\cdot}g^{-1}$. Monovalent soluble salts such as $KH_2PO_4,\;KNO_3$, and $(NH_4)_2SO_4$ reduced absorption of the hydrogel, but the degrees of inhibition in absorption were similar in three kinds of salts. Twenty milliequivalents per liter of $Ca_{2+}\;or\;Mg_{2+}$ reduced water absorption of STSB to $14\%$ compared to those of deionized water. Solution absorption was consistently lower in the presence of divalent cations than in the presence of the monovalent cations. But the absorption was unaffected by the uncharged salt such as urea in all concentrations tested. The final $K^+\;and\;NH_4^+-N$ concentrations of the solution remaining after absorption by STSB was higher than those of the initial solution. The soaking of STSB to full strength of Hoagland solution resulted in increase of $NO_3^--N,\;H_2PO_4^-\;and\;SO_4^{2-}$ concentrations in external solution compared to initial solution, reaching 5,300, 250 and 1,500 $mL{\cdot}g^{-1}$, respectively, at 24 hrs after soaking.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.5
• /
• pp.369-373
• /
• 2004

In order to elucidate the possibility of artificial production of p. ferulae by solid-state culture, the optimization of culture conditions was carried out. When $NH_4H_2PO_4$ and $CaCO_3$ were used in the cultures using test tube with 30 g of Populus sawdust at $25^{\circ}C{\pm}1$ in the dark, the favored mycelial growth was observed with $1\%$ of $NH_4H_2PO_4$ and the production of polysaccharide was 7.85 mg/100 mg of mycelium with $1\%$ of $CaCO_3$. The mixtures of $80\%$ of Populus Sawdust and $20\%$ of rice bran at $60\%$ of water content were determined to be optimal for the production of fruiting bodies in the sawdust culture. When three treatments containing various ratios of garlic powder were conducted, yields of fruiting bodies were drasti[ally higher than those of Synthetic mixture without garlic powder The highest yield (143 g/bag) was obtained with $7\%$ garlic powder. The yield of synthetic mixture containing $7\%$ of garlic powder was $83\%$ higher than that of Sawdust culture. The reason why garlic powder did support growth was not clear but it is possible that garlic powder might contain effective components for the formation of fruiting body. The optimal synthetic mixture composition consisted of cotton seed $77\%$, lime $6.4\%,\;K_2HPO_4\;0.2\%,\;KH_2PO_4\;0.2\%,\;CaHPO_4\;0.2\%$, corn flour $4\%$, wheat flour $5\%$, and garlic pow-der $7\%$.

• Journal of Bio-Environment Control
• /
• v.9 no.2
• /
• pp.85-93
• /
• 2000

This study was carried out to investigate the effects of several substrates and ratio of NO3--N to NH4--N in nutrient solution on growth, yield and mineral uptake of sweet pepper(Capsicum annuum L.) in bag culture. The content of minerals such as P, K, Ca and Mg showed difference in concentration among media: P and Mg were the highest in vermiculite in vermiculti+rice hull, K in perlite+vermiculite and Ca in perlite+peatmoss; with the lowest in the single perlite medium respectively, Ca of mineral made fairly higest level in concentration compared with the others in all of the media. The concentration of mineral content was lower in the ratio of 8:2 than that of 10:0. Admitting that the pH made difference depending on the kind of substrates and ratios of NO3--N to NH4--N. The pH of 10:0 ratio in all the substrates was higher and more stable than that of 8:2. The range of EC in all the substrates showed from 1.78ds·m-1 to 2.10 ds·m-1, which was optimum range for growth of sweet pepper, and range of EC is larger in 8:2 ratio than that in 10:0 ratio. Plant height and stem diameter were nothing to do with the kind of substrates, but leaf area was the largest at vermiculite+rice hull of the 8:2 ratio, fresh and dry weights were heavier at peatmoss+carbonized rice hull, but were the lightest at perlite. All indexes related to the growth which had something to do with the kind of substrates higher in 8:2 ratio than those in 10:0 ratio. The number of fruit and fresh weight related to the ratio of the 8:2 were the highest as 17.5 at vermiculite+rice hull with 1,588g of fresh weight, while the yield from perlite was the lowest. The number of fruit was the highest as 16.4 at virmiculite+rice hull, yield was the higest as 1,394a at perlite+ peatmoss. The yield of 8:2 ratio at all substrates was higher than that of 10:0 ratio. Of the mineral content related to the plant part, K+ and Mg2+ were higher in concentration at leaf; Ca2+ were higher at root; PO4- was higher at stem and fruit; The content of mineral showed no difference between the ratio of the 8:2 and the ratio of the 10:0 with no regrading to the difference of mineral content among substrates; and K+, Ca2+, and Mg2+ uptake of sweet pepper were higher at 10:0 ratio than that of 8:2; 2while PO4- uptake of sweet pepper was lower at 10:0 ratio than that of 8:2 ratio.

• Restorative Dentistry and Endodontics
• /
• v.37 no.1
• /
• pp.16-23
• /
• 2012

Objectives: Present study was undertaken to investigate the crystal growth onto synthetic hydroxyapatite (HA) seeds in pH 4.3 and pH 7.0 supersaturated solutions with different fluoride concentrations. Materials and Methods: 8 groups of pH 4.3 and 7.0 calcium phosphate supersaturated solutions were prepared with different fluoride concentrations (0, 1, 2 and 4 ppm). Calcium phosphate precipitates yield crystal growth onto the HA seed surface while solutions flow. For evaluation of crystallizing process, the changes of $Ca^{2+}$, $PO{_4}^{3-}$, $F^-$ concentrations of the inlet and outlet solutions were determined. The recovered solid samples were weighed to assess the amount of minerals precipitated, and finally determined their composition to deduce characteristics of crystals. Results: During the seeded crystal growth, there were significantly more consumption of $Ca^{2+}$, $PO{_4}^{3-}$, $F^-$ in pH 4.3 solutions than pH 7.0 (p < 0.05). As fluoride concentration increased in pH 4.3 solution, $Ca^{2+}$, $PO{_4}^{3-}$, $F^-$ consumption in experimental solutions, weight increment of HA seed, and fluoride ratio in crystallized samples were increased. There were significant differences among the groups (p < 0.05). But in pH 7.0 solution, these phenomena were not significant. In pH 7.0 solutions, analyses of crystallized samples showed higher Ca/P ratio in higher fluoride concentration. There were significant differences among the groups (p < 0.05). But in pH 4.3 solution, there were not significant differences in Ca/P ratio. Conclusions: Crystal growth in pH 4.3 solutions was superior to that in pH 7.0 solutions. In pH 4.3 solutions, crystal growth increased with showed in higher fluoride concentration up to 4 ppm.

• Journal of the Korean Ceramic Society
• /
• v.48 no.3
• /
• pp.217-221
• /
• 2011

Glass-ceramic materials, which consist of glass matrix phase containing crystalline ${\beta}-Ca_3(PO_4)_2$ and ${\beta}-Ca_2P_2O_7$, have been prepared by heating at $750-900^{\circ}C$ of calcium phosphate invert glasses in the silica-free $CaO-P_2O_5-TiO_2-Na_2O$, system. With increasing heating temperature from 750 to $900^{\circ}C$, the crystallite size of precipitated ${\beta}-Ca_3(PO_4)_2$ in glass with $55CaO{\cdot}35P_2O_5{\cdot}3TiO_2{\cdot}7Na_2O$ (mol%) composition increased from 48 to 91 nm. With the extension of the immersion time in dilute acetic acid solution (pH = 5) to ${\geq}$200 min, the degree of dissolution of $Ca^{2+}$ and $P^{5+}$ ions in the glass-ceramics was linearly increased and the solution was constantly maintained at pH = ~7. Biomimetic nanostructured (62-88 nm in average dia.), sphere-shaped hydroxyapatite was homogeneously formed on the surface of the glass-ceramics when socked for 7-14 days in a Hanks' solution, indicating bioactivity of the prepared glass-ceramics.

• Membrane and Water Treatment
• /
• v.15 no.3
• /
• pp.117-130
• /
• 2024

The possibility of using lime/mineral solvent solutions has been investigated to effectively remove T-P from wastewater. The lime solvent solution showed an initial T-P removal efficiency of about 90% compared to the less efficient mineral solvent solution removal. High pH and dissolved Ca2+ can form hydroxyapatite minerals (Ca5(PO4)3(OH) or Ca10(PO4)6(OH)2 and can also remove SS and COD from wastewater. Feldspar dissolution solution can be reused twice because the Ca limited sample content provided, but further research is needed to discover other influencing parameters that control the T-P removal efficiency in real wastewater. Because it plays an important role of alkalinity in T-P removal, the success rate is limited. In practical applications, it is obtained according to the pH value wastewater in the environment. The results obtained in this study can highlight new insights on the use of limestone/dissolved mineral solutions to control T-P in wastewater, instead of directly using commercial chemical agents that can produce large amounts of unreacted chemical sludge.