• Journal of the Korean earth science society
• /
• v.32 no.7
• /
• pp.707-718
• /
• 2011

We study the natural background and geochemical characteristics on geological groups of stream sediment in the Boseong-Hwasun area. We collected 186ea stream sediment samples along the primary channels and dried them naturally in laboratory. The contents of major, trace and rare earth elements were determined by XRF, ICP-AES and NAA analysis methods. In order to know the natural background and geochemical characteristics of geological groups, we classified the studied area into granitic gneiss (GGn) area and porphyroblastic gneiss (PGn) area. The contents range of major elements for GGn area is $SiO_2$ 45.5-73.09 wt.%, $Al_2O_3$ 12-20.76 wt.%, $Fe_2O_3$(T) 3.72-8.85 wt.%, $K_2O$ 2.38-4.2 wt.%, MgO 0.75-2.77 wt.%, $Na_2O$ 0.78-1.88 wt.%, CaO 0.27-2.1 wt.%, $TiO_2$ 0.56-1.72 wt.%, $P_2O_5$ 0.06-0.73 wt.% and MnO 0.03-0.95 wt.%, and for PGn area it is $SiO_2$ 43.74-70.71 wt.%, $Al_2O_3$ 11.54-25.05 wt.%, $Fe_2O_3$(T) 3.44-13.46 wt.%, $K_2O$ 2.08-3.86 wt.%, MgO 0.65-2.99 wt.%, $Na_2O$ 0.63-1.7 wt.%, CaO 0.35-2.07 wt.%, $TiO_2$ 0.68-4.17 wt.%, $P_2O_5$ 0.1-0.31 wt.% and MnO 0.07-0.33 wt.%. The contents range of hazard elements for GGn area is Cr 41.7-242 ppm, Co 7.6-25.1 ppm, Ni 12-61 ppm, Cu 10-47 ppm, Zn 48.5-412 ppm, Pb 17-215 ppm, and for PGn area, it is Cr 29.6-454 ppm, Co 5.9-53.7 ppm, Ni 8.7-287 ppm, Cu 6.4-134 ppm, Zn 43.6-370 ppm, Pb 15-37 ppm area. There is a good correlation between Cr and MgO and Co among $Al_2O_3$, $Fe_2O_3$(T), MgO and Ni among $Fe_2O_3$(T), CaO, MgO whereas Cu, Zn and Pb have a low correlation for major elements in GGn area. Generally Cr, Co, Ni, and Cu have a good correlation with major elements, but a low correlation with Zn and Pb in PGn area.

• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.10-15
• /
• 1999

The chemical compositions and microstructure of the punch'ong excavated from Bokwangri, Kangnung were investigated by the scanning electron microscope (SEM) with an energy dispersive X-ray spectrometer (EDS), X-ray diffractometer (XRD), and dilatometer. The compositions of body were $SiO_2(73-78\%),\;Al_2O_3(13-16\%)$, $RO{\cdot}R_2O(4-5\%,\;R=Ca,\;Mg,\;Na,\;K),\;R_xO_y(3-6\%,\;R=Fe,Ti)$ in weight ratio, which were higher silica and flux $(RO{\cdot}R_2O)$ but lower alumina. Owing to the high content$(21-30\%)$ of calcium oxide the glaze is considered lime type. Firing temperature range for the ceramic was presumed to about $1150^{\circ}C$.

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.116-123
• /
• 1997

A chemically stabilized $\beta$-cristobalite, which is stabilized by stuffing cations of $Ca^{2+}$ and $Al^{3+}$, was prepared by a solution-polymerization route employing Pechini resin or PVA solution as a polymeric carrier. The polymeric carrier affected the crystallization temperature, morphology of calicined powder, and particle size distribution. In case of the polyvinyl alcohol (PVA) solution process, a fine $\beta$-cristobalite powder with a narrow particle size distribution (average particle size : 0.3$\mu\textrm{m}$) and a BET specific surface area of 72 $\m^2$/g was prepared by an attrition-milling for 1 h after calcination at 110$0^{\circ}C$ for 1h. Wider particle size distribution and higher specific surface area were observed for the $\beta$-cristobalite powder derived from Pechini resin. The cubie(P1-to-tetraganalb) phase transformation in polynystalline $\beta$-cristobalite was induced at approximately 18$0^{\circ}C$. Like other materials showing transformation toughening, a critical size effect controlled the $\beta$-to-$\alpha$ transformation. Densifed cristobalite sample had some cracks in its internal texture after annealing. The cracks, occurred spontaneoulsy on cooling, were observed in the sample with an average grain sizes of 4.0 $\mu\textrm{m}$ or above. In case of the sintered cristobalite having a composition of CaO.$2Al_2O_3$.40SiO$_2$, small amount of amorphous phase and slow grain growth during annealing were observed. Shear stress-induced transformation was also observed in ground specimen. Cristobalite having a composition of CaO.2Al2O3.80SiO2 showed a more sensitive response to shear stress than the CaO.$2Al_2O_3$.40SiO$_2$ type cristobalite. Shear-induced transformation resulted in an increase of volume about 13% in $\alpha$-cristobalite phase on annealing for above 10 h in the case of the former composition.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.357-365
• /
• 1989

The positional parameters of framework atoms, cations, and water molecules in hydrated and dehydrated $Mg_4Na_4-A$, $Ca_6-A$, $Zn_5Na_2-A$ and $Co_4Na_4-A$ were determined by the optimization technique using some potential energy functions and VAIOA optimization program. Upon dehydration, cations in hydrated states move toward the framework oxygens of 6 rings. Frameworks of fully dehydrated zeolite A are more stable than those of fully dehydrated divalent cation exchanged Zeolite A. There are three different kinds of water molecules in divalent cation exchanged Zeolite A; W(III) (water molecules having hydrogen bonds), W(II) (water molecules associated with $Na^+$ ions), and W(I) (water molecules associated with divalent cations). Three different DTA endothermic peaks were observed corresponding to the dehydration of three different kinds of water molecules in divalent cation exchanged Zeolite A.

• Journal of Information Display
• /
• v.13 no.3
• /
• pp.97-100
• /
• 2012

We have conducted two kinds of the so-called charge-compensated aliovalent element substitutions to control the photoluminescence properties of $NaAlSiO_4:Eu^{2+}$ with a special focus on the enhancement of the excitation intensity at 400 nm. The aliovalent element substitutions include cation-cation and cation-anion co-substitutions according to the general formulas $Na_{1-x}M_xAl_{1+x}Si_{1-x}O_4:Eu^{2+}$ and $Na_{1-x}M_xAlSiO_{4-x}N_x:Eu^{2+}$ (M = $Mg^{2+}$, $Ca^{2+}$, and $Sr^{2+}$), respectively. The increase in the relative excitation intensity at 400 nm has been achieved in both types of the co-substitutions. Thus, the present research has demonstrated the effectiveness of the charge-compensated element substitution.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.4
• /
• pp.221-230
• /
• 2000

이성분 희토류 원소로 치환된 4종류의 합성불화인회석(synthetic fluorapatite) (Ap49: La+Gd, Ap50:Ce+Dy, Ap51: Pr+Er, Ap54: Eu+Lu; $Ca{10-x-2y}$ $Na_{y}$ $REE_{x+y}$($P_{1-x}$ //$Si_{x}$ $_{4}$)$_{6}$ $F_{2}$, x=0.13~0.12, y=0.26~0.42)을 대상으로 X-선 회절분석을 통해 얻어진 자료를 이용하여 리트벨트 구조분석을 실시하고 치환된 희토류원소의 거동을 단결정법으로 구해진 결과와 비교.분석하였다. 리트벨트 구조분석결과 합성불화인회석은 공간군 $P6_3$/m, 단위포는 평균하여 a=9.3906(1) $\AA$, c=6.8924(1) $\AA$, V=527.36 $\AA^3$의 값을 갖는다. 구조의 정밀도를 나타내는 R 지수를 보면 $R_{B}$ / 값은 17.29~18.80이고 S(GofF)값은 1.44~1.68로 계산되었다. 불화인회석은 9개의 산소를 배위하는 Ca1자리와 6개의 산소와 하나의 불소가 배위하는 Ca2자리가 있으며 Ca1-O의 평균거리는 2.563 $\AA$이고 Ca2-O의 평균거리는 $2.460 \AA$으로 Ca1자리가 Ca2자리보다 다소 크다. 구조자리 치환식에서는 $Ca^{2+}$ / 자리를 치환하는 $REE^{3+ }$ 로 인하여 전하균형을 맞춰주기 위해서 인과규소가 함께 참여하였다. ($REE^{3}$+Si$^{ 4+}$ $2Ca^{2+}$ : Ca1) 계산된 희토류원소의 자리점유율(REE-Ca2/REE-Cal)은 원자번호가 증가함에 따라 일정하게 감소하는 경향을 보여주며 이는 희토류원소의 거동이 LREE는 크기가 상대적으로 작은 Ca2 자리에 우선 치환되고 HREE는 크기가 큰 Ca1자리에 우선 치환되는 경향을 지시한다.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.45-51
• /
• 2002

This study was performed to investigate removal efficiency of wastewater by the prepared coagulant using waste oyster shell and loess. Waste oyster shell and loess contain respectively high CaO(55.43% by weight), $SiO_2$(45.30% by weight). Waste oyster shell was calcined to improve the purity of CaO at the calcination condition of $900^{\circ}C$ for 2hours, and then crushed 0.074 mm(200mesh) size by ball mill. Also, coagulant was prepared with calcined waste oyster shell and loess powder by hydration reaction. Calcined waste oyster shell and loess powder were combined with mixing ratio of 6 : 4, 7:3, 8:2 and 9:1. Though comparison experiment between prepared coagulant and chemical )$Ca(OH_2$, prepared coagulant was proved as having replaceable possibility of chemical )$Ca(OH_2$in wastewater treatment plant.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.35-42
• /
• 1985

$eta$-Sialon powders were prepared by reduction-nitridation from mixture of Wando pyrophyllite and graphite as a reducing agent at 135$0^{\circ}C$ in 80% $N_2$-20% $H_2$ atmosphere. As the reaction products $Si_2ON_2$, $\beta$-$Si_3N_4$ a--$Si_3N_4$ and $\beta$-SiC were observed. Additive agents of MgO, CaO, $Y_2O_3$ were used for promoting the reduction and nitridiation aeaction. The present study was conducted to investigate the effects of silica-carbon ratio ($SiO_2$/C=weight ratio), raction time gas flow rate pellet size and powder packing on synthesis of $\beta$-Sialon from Wando pyropyllite.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.781-785
• /
• 2016

With trend of the miniaturization and the high-functionalizing of mobile communication system, low-loss microwave dielectric materials are widely used for high frequency communication components. These dielectric materials should be co-sintered with highly electric-conducting metal such as silver or copper for high-frequency and thick film process application. Sintering temperature of $Ca(Li_{1/3}Nd_{2/3})_{0.2}Ti_{0.8}]O_{3-{\delta}}$, which has excellent dielectric properties such as ${\varepsilon}_r$ above 40, quality factor ($Q{\cdot}f_0$) above 16,000 GHz, and TCF (temperature coefficient of resonant frequency) of $-20{\sim}-10ppm/^{\circ}C$, is reported as high as $1,175^{\circ}C$, so it could not be co-sintered with silver or copper. Therefore in this study, low-temperature melting glasses of Zn-B-O and Zn-B-Si-O systems were added to $Ca[(Li_{1/3}Nb_{2/3})_{0.8}Ti_{0.2}]O_{3-{\delta}}$ to lower its sintering temperature under $900^{\circ}C$ without losing excellency of dielectric properties. With 15 weight % of Zn-B-Si-O glass and sintered at $875^{\circ}C$, specimen showed density of $4.11g/cm^3$, ${\varepsilon}_r$ of 40.1, $Q{\cdot}f_0$ of 4,869 GHz, and TCF of $-5.9ppm/^{\circ}C$. With 15 weight % of Zn-B-O glass and sintered at $875^{\circ}C$, specimen showed density of $4.14g/cm^3$, ${\varepsilon}_r$ of 40.4, $Q{\cdot}f_0$ of 7,059 GHz, and TCF of $-0.92ppm/^{\circ}C$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.2
• /
• pp.132-137
• /
• 2016

Field monitoring was performed to evaluate the chemical properties of 260 paddy soils every 4 years from 1999 to 2015 in Gyeongnam province. Soil chemical properties, including soil pH, electrical conductivity, amount of organic matter (OM), available phosphate ($P_2O_5$), exchangeable potassium (K), calcium (Ca), magnesium (Mg) and sodium (Na), and available silicate ($SiO_2$) were analyzed. In 2015, the average values of pH, OM, available $P_2O_5$, exchangeable K, Ca, and Mg, and available $SiO_2$ was 5.8, $30g\;kg^{-1}$, $222mg\;kg^{-1}$, $0.37cmol_c\;kg^{-1}$, $6.5cmol_c\;kg^{-1}$, and $1.4cmol_c\;kg^{-1}$, $252mg\;kg^{-1}$, respectively. The frequency distribution within optimum range of paddy soils was 49.2%, 20.8%, 18.5%, and 5.8% for soil pH, OM, available $P_2O_5$, and available $SiO_2$, respectively. The available $P_2O_5$ concentrations in 2015 was excess level with portion of 58% and did not alter significantly during the experimental period. Although the average of available $SiO_2$ concentration has tended to increase with every year, the insufficient proportion of available $SiO_2$ concentration in 2015 was 48%. These results indicated that a balanced management of soil chemical properties can properly control the amount of fertilizer applied for sustainable agriculture in paddy field.