• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.647-649
• /
• 2004

We have synthesized phosphor in the system CaO-$Al_2O_3-SiO_2$ by combinatorial polymerized-complex method. The application of combinatorial synthesis and characterization of luminescent materials has been enlarged to identification and optimization in interesting new phosphor. In this study, we investigated luminescent properties of above-mentioned materials by excitation and emission spectra. In $Eu^{2+}$ activated $Ca_1Al_2Si_2O_8$ phosphor emit the blue light.

• Journal of Environmental Science International
• /
• v.15 no.6
• /
• pp.587-592
• /
• 2006

The advantage of CFBC(Circulating fluidized bed combustor) is that it can apply to various fuel sources including the lower rank fuel and remove SOx by means of direct supply of limestone to the combustor without additional desulfation facility. In this paper, we denote characteristics of fly and bed ash to reuse finer limestone usually abandoned(used spec[Coarse LS] 0.1mm under 25%, new spec[Fine LS] 0.1mm under 50%). According to the results, the chemical composition of fly ash was as follows; $SiO_2\;40.8%,\;Al_2O_3\;31.9%,\;CaO\;10.7%,\;K_2O\;4.46%$ in the case of coarse limestone and $SiO_2\;41.1%,\;Al_2O_3\;31.3%,\;CaO\;10.9%,\;K_2O\;4.66%$ in the case of fine limestone. The chemical composition of bed ash was as follows; $SiO_2\;54.2%,\;Al_2O_3\;33.1%,\;CaO\;1.56%,\;K_2O\;4.34%$ in the case of coarse limestone and $SiO_2\;53.8%,\;Al_2O_3\;32.6%,\;CaO\;2.21%,\;K_2O\;4.45%$ in the case of fine limestone. It showed that there was no significant change in chemical composition. And it is conformed that there was no significant change in particle size and shapes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.195-195
• /
• 2008

CAS계 유리에 $CaCO_3-Al_2O_3$ 혼합물 및 화합물을 10, 30 wt% 첨가하여 저온 소걸 및 마이크로파 유전 특성을 고찰하였다. CAS계 유리의 연화온도는 $841^{\circ}C$ 이며, CAS계 유리에 $CaCO_3$ 와 30 wt%의 $CaCO_3-Al_2O_3$ 혼합물을 melting되며, 10 wt%의 $CaCO_3$, $Al_2O_3$, $1CaCO_3-1Al_2O_3$ 혼합물 및 $CaAl_2O_4$ 화합물를 10 wt% 첨가하였을 때 $900^{\circ}C$ 이하에서 소걸이 가능하였다. 복합체의 XRD 상 분석 결과, CaCO3를 첨가하였을 때에는 모든 조성이 비정질을 나타내었고, $Al_2O_3$와 $1CaCO_3-1Al_2O_3$ 혼합물은 $Al_2O_3$ 결정상이 생성되었고, $CaAl_2O_4$ 화합물은 $CaAl_2Si_2O_8$의 hexagonal와 anorthite 결정상이 생성되었다. 따라서 CAS-10 (A, C-A, CA) 복합체는 $900^{\circ}C$에서 각각 유전율 ($\varepsilon_r$) 6.4, 6.9, 5.15 와 품질계수 ($Q^*f$) 2,400, 1,500, 3,000의 마이크로파 유전 특성을 나타내어 LTCC 기판 재료로 사용이 가능하며, 특히 $CaAl_2O_4$ 화합물을 사용하였을 때 가장 우수한 유전 특성을 나타내는 것을 확인하였다.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1630-1636
• /
• 2009

Nine alkali-activated (AA) mortars were mixed and cured at water or air-dried conditions to explore the significance and limitation for the application of the combination of Ba and Ca ions as an alkali-activator. Ground granulated blast-furnace slag (GGBS) was used for source materials, and calcium hydroxide (Ca(OH)₂) and barium hydroxide (Ba(OH)₂) were employed as alkali activators. Test results clearly showed that the water curing condition was more effective than the air-dried curing condition for the formation of the denser calcium silicate hydrate (C-S-H) gels that had a higher molar Si/Ca ratio, resulting in a higher strength development. At the same time, the introduction of Ba(OH)₂ led to the formation of 2CaO·Al₂O₃·SiO₂·8H₂O (C₂ASH₈) hydrates with higher molar Si/Al and Ca/Al ratios. Based on the test results, it can be concluded that the developed cementless mortars have highly effective performance and high potential as an eco-friendly sustainable building material.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.6-9
• /
• 1987

The study of the $Na_3YSi_3O_9$ structure, by x-ray diffraction and infrared spectrum, showed that $Na_3YSi_3O_9$ is similar to $Na_4CaSi_3O_9$ except for its being pseudo-cubic instead of cubic. The peaks in the x-ray diffraction pattern of $Na_3YSi_3O_9$ could therefore be indexed on the basis of the $Na_4CaSi_3O_9$ cell. Also, modified $Na_3MSi_3O_9$ (M = Lu, Yb, Tm, Er, Y, Ho, Dy, Gd, Eu, and Sm) type compounds were synthesized by introducing excess sodium, decreasing M(III) concentration, and substituting small amount of phosphorus for silicon. The unit cell parameters of the composition $Na_{3.2}M_{0.7}Si_{2.9}P_{0.1}O_{8.7}$ were estimated from x-ray powder diffraction patterns using the Cohen method.

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.861-868
• /
• 1994

CaO-Al2O3 glass is a good candidate as optical fiber amplifier and laser. In this study, optical properties for 4I13/2longrightarrow4I15/2 transition of Er3+ ions doped in CaO-Al2O3 glasses were investigated. Optical absorptions, radiative transition probabilities and lifetimes for 4I13/2 level were evaluated by using Judd-Ofelt theory. Also, induced- emmision cross-sections of 4I13/2longrightarrow4I15/2 transition were calculated. Radiative transition probability and lifetime of 4I13/2 level were 144.6s-1, 690$mutextrm{s}$ respectively for 60CaO.40Al2O3 glass(FS0) and 152.6s-1, 660 $mutextrm{s}$ for 54 CaO.36Al2O3.10SiO2 glass (FS10). Each induced-emission cross sections for FS0 and FS10 was 0.749$\times$10-20 $\textrm{cm}^2$, 0.892$\times$10-20 $\textrm{cm}^2$. Obtained values were comparable with those of ZBLA glass studied as optical fiber amplifier and laser material.

• Transactions of Materials Processing
• /
• v.26 no.5
• /
• pp.306-313
• /
• 2017

This study investigated the microstructure, tensile strength, and high cycle fatigue properties of ADC12 aluminum alloys with different $Mg+Al_2Ca$ contents manufactured using die casting process. Microstructural observation identified the presence of ${\alpha}-Al$, eutectic Si, $Al_2Cu$, and Fe-intermetallic phases. The increase of $Mg+Al_2Ca$ content resulted in finer pore size and decreased pore distribution. Room temperature tensile strength tests were conducted at strain rate of $1{\times}10^{-3}/sec$. For 0.6%Mg ADC12, measured UTS, YS, and El were 305.2MPa, 157.0MPa, and 2.7%, respectively. For 0.8%Mg ADC12, measured UTS, YS, and El were 311.2 MPa, 159.4 MPa, and 2.4%, respectively. Therefore, 0.8% ADC12 alloy had higher strength and slightly decreased elongation compared to 0.6% Mg ADC12. High cycle fatigue tests revealed that 0.6% Mg ADC12 alloy had a fatigue limit of 150 MPa while 0.8% Mg ADC12 had a fatigue limit of 160MPa. It was confirmed that $Mg+Al_2Ca$ added ADC12 alloy achieved finer, spherical eutectic Si particles, and $Al_2Cu$ phases with greater mechanical and fatigue properties since size and distribution of pores and shrinkage cavities decreased as $Mg+Al_2Ca$ content increased.

• Journal of the Mineralogical Society of Korea
• /
• v.2 no.1
• /
• pp.8-10
• /
• 1989

Sphene from the McDonald pegmatite near Bancroft, Ontario, Canada was analyzed using EPMA. It contains 4.3 to 6.3 weight percent of Nb2O5 with an average formula Ca1.02(Ti0.62Al0.22Nb0.07Fe0.06Ta0.01)Si0.99(O4.85F0.16). Three types of subtitutions are possible; 1)2Ti4+=(Nb, Ta)5+ + (Al, Fe3+), 2) Ti + O = (Al, Fe3+) + (F, OH), and 3) 2Ti + O = Fe2+ + (Nb, Ta)5+ + (F, OH). T재 different schemes of substitutions for balancing the analysis are considered when the iron is either all ferric or all ferrous. Assuming stoichiometry fo Ca and Si, a general formula derived from the two different schemes is Ca(Ti0.64Al0.22Fe3+0.06-X {{{{Fe_{x}^{2+} }} Nb0.01)Sio4.80-XF0.16(OH)0.04+x.

• Journal of the Korean Ceramic Society
• /
• v.36 no.3
• /
• pp.274-283
• /
• 1999

1.1-nm tobermorite의 수열합성에 SiO2원으로 zeolite광물을 출발물질로하여 소석회와 Ca(Si+Al)의 몰비 0.8~1.0로 150$^{\circ}$~23$0^{\circ}C$,8~48시간 동ㅇㄴ 포화증기압하에서 수열반응을 시킨 결과, 반응초기단계에서 tobermorite가 생성되었고, 고결정성 1.1-nm tobermorite의 최적합성조건은 0.8몰, 23$0^{\circ}C$, 48시간이었다. 출발물질중 Al의 존재로 tobermorite는 Ca/(Si+Al)몰비 0.8이 1.0보다 결정화가 급속히 이루어지고 있으나 Al를 함유치 않은 석영의 경우에는 Ca/Si 몰비 1.0이 0.8에서 보다 결정화가 빠르게 진행되었다 1.1-nm tobermorite는 $700^{\circ}C$에서 일주일간 가열처리하여도 저면간격이 변화하지 않는 열적거동이 이상형임을 보여주었다. 특히 출발물질중 Al의 존재는 1.1-nm tobermorite의 결정화와 안정화를 촉진시켜주며 Al이온이 tobermorite구조중의 Si이온과 동형치환을 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.1
• /
• pp.19-24
• /
• 2007

The effects of $B_2O_3-SiO_2-R(R;CaO,\;BaO,\;ZnO,\;Bi_2O_3)$ borosilicate glass system on the sintering behavior and microwave dielectric properties of ceramic/glass composites were investigated as functions of modifier, glass addition ($30{\sim}50\;vol%$) and sintering temperature ($500{\sim}900^{\circ}C$ for 2 hrs). The addition of 50 and 45 vol% glass ensured successful sintering below $900^{\circ}C$. Sintering characteristics of the composites were well described in terms of modifier. Borosilicate glass enhanced the reaction with $Al_{2}O_{3}$ to form pores, second phases and liquid phases, which was responsible to component of modifier. Dielectric constant (${\varepsilon}_{r},\;Q{\times}f_{o}$) and temperature coefficient of resonant frequency (${\tau}_{f}$) of the composite with 50 and 45 vol% glass contents($B_{2}O_{3}:SiO_{2}:R=25:10:65$) demonstrated A-CaBS(7.8, 2,560 GHz, -81ppm/$^{\circ}C$), A-BaBs(5.8, 3.130 GHz, -64 ppm/$^{\circ}C$), A-ZnBS(5.7, 17,800 GHz, -21 ppm/$^{\circ}C$), A-BiBs(45 vol% glass in total)(8.3, 2,700 GHz, -45 ppm/$^{\circ}C$) which is applicable to substrate requiring an low dielectric properties.