• Korean Journal of Food Science and Technology
• /
• v.5 no.4
• /
• pp.215-223
• /
• 1973

A potent citric acid producing strain was selected by an extensive screening test of the yeasts isolated from the various sources. These experiments were conducted to identify the selected strain and investigate the cultural conditions for citric acid production. The results obtained were as fellows: 1. The selected strain of yeast was identified to Hansenula anomala var. anomala by a taxnoomic study of Lodder. 2. The optimum conditions for citric acid production in the basal medium containing 10% glucose were: temperature $30^{\circ}C$, the concentration of $CaCO_3$ 3% and the velocity of oscillation 110 oscills/min. 3. As a nitrogen source ol the basal medium $NH_4Cl(0.1%)$ was the most effective for citric acid production. Organic nitrogen sources such as peptone were adequate for growth of the strain but not for citric acid production. 4. The most effective concentration of glucose was 10% in yield ratio of citric acid from sugar. 5. The addition of defatted rape seed, defatted perilla or defatted rice bran to the medium was effective for citric acid production. When 5% extract solution of defatted rape seed was added, the citric acid production was increased as much as 40% as compared with the case of adding yeast extract(0.2%). 6. The most effective concentration of $KH_2PO_4$ and $MgSO_4{\cdot}7H_2O$ in the medium(for citric acid Production) was 0.05% and 0.025% respectively. 7. Under the optimum cultural conditions, the growth of the strain was continued up to 5 days and the increase of citric acid production was continued up to 6 days, showing the yield ratio of 46% to glucose.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1203-1210
• /
• 1999

Soy sauce was fermented with the addition of mountain edible herbs, Ligularia fischeri, Codonopsis lanceolata and Symphytum officinale. In general, the total nitrogen content of soy sauce was increased with the increment of the amount of added mountain herbs. The mineral contents of calcium and potassium in the soy sauce after four months of aging at 20% substitution of Codonopsis lanceolata were increased by 1.3 and 1.5 times, respectively. With 10% substitution of mountain herb mixtures, the contents of tyrosine and arginine were increased by about 2 times as compared to the control. In the Rec assay system, antimutagenic effect of soy sauce with 10 and 20% substitution of Codonopsis lanceolata was higher than other samples. The results of sensory evaluation revealed that overall acceptability of soy sauce with 7% substitution of Codonopsis landeolata and 5% of mountain herb mixture exceeded other groups of samples.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.407-417
• /
• 2020

The capacity of the designated landfill site for asbestos-containing waste is approaching its limit because the amount of asbestos-containing slate is increasing every year. There is a need for a method that can safely and inexpensively treat asbestos-containing slate in large capacity and at the same time recycle it. A cement kiln can be an alternative for heat treatment of asbestos-containing slate. We intend to develop a pilot scale device that can simulate the high temperature environment of a cement kiln using a high temperature plasma reactor in this study. In addition, this reactor can be used to inactivate asbestos in the slate and to synthesize one of the minerals of cement, to confirm the possibility of recycling as a cement raw material. The high-temperature plasma reactor as a pilot scale experimental apparatus was manufactured by downsizing to 1/50 the size of an actual cement kiln. The experimental conditions for the deactivation test of the asbestos-containing slate are the same as the firing time of the cement kiln, increasing the temperature to 200-2,000℃ at 100℃ intervals for 20 minutes. XRD, PLM, and TEM-EDS analyses were used to characterize mineralogical characteristics of the slate before and after treatment. It was confirmed that chrysotile [Mg3Si2O5(OH)4] and calcite (CaCO3) in the slate was transformed into forsterite (Mg2SiO4) and calcium silicate (Ca2SiO4), a cement constituent mineral, at 1,500℃ or higher. Therefore, this study may be suggested the economically and safely inactivating large capacity asbestos-containing slate using a cement kiln and the inactivated slate via heat treatment can be recycled as a cement raw material.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.255-264
• /
• 2009

To evaluate the effects of chemical pretreatments of lignocellulosic biomass on enzymatic hydrolysis process, Populus euramericana was pretreated for 1 hr with 1% sulfuric acid ($H_2SO_4$) at $150^{\circ}C$ and 1% sodium hydroxide (NaOH) at $160^{\circ}C$, respectively. Before the enzymatic hydrolysis, each pretreated sample was subjected to drying process and thus finally divided into four subgroups; dried or non-dried acid pretreated samples and dried or non-dried alkali pretreated samples and chemical and physical properties of them were analyzed. Biomass degradation by acid pretreatment was determined to 6% higher compared to alkali pretreatment. By the action of acid ca. 24.5% of biomass was dissolved into solution, while alkali degraded ca. 18.6% of biomass. However, reverse results were observed in delignification rates, in which alkali pretreatment released 2% more lignin fragment from biomass to the solution than acid pretreatment. Unexpectedly, samples after both pretreatments were determined to somewhat higher crystallinity than untreated samples. This result may be explained by selective disrupture of amorphous region in cellulose during pretreatments, thus the cellulose crystallinity seems to be accumulated in the pretreated samples. SEM images revealed that pretreated samples showed relative rough and partly cracked surfaces due to the decomposition of components, but the image of acid pretreated samples which were dried was similar to that of the control. In pore size distribution, dried acid pretreated samples were similar to the control, while that in alkali pretreated samples was gradually increased as pore diameter increased. The pore volume which increased by acid pretreatment rapidly decreased by drying process. Alkali pretreatment was much more effective on enzymatic digestibility than acid pretreatment. The sample after alkali pretreatment was enzymatically hydrolyzed up to 45.8%, while only 26.9% of acid pretreated sample was digested at the same condition. The high digestibility of the sample was also influenced to the yields of monomeric sugars during enzymatic hydrolysis. In addition, drying process of pretreated samples affected detrimentally not only to digestibility but also to the yields of monomeric sugars.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2006

The characteristics of the aluminum waste melting and the distribution of the radioactive nuclides have been investigated for the estimation on the volume reduction and the decontamination of the aluminum wastes from the decommissioning of the TRIGA MARK it and III research reactors at the Korea Atomic Energy Research Institute(KAERI). The aluminum wastes were melted with the use of the fluxes such as flux $A:NaCl-KCl-Na_3AlF_6$, flux B:NaCl-NaF-KF, flux $C:CaF_2$, and flux $D:LiF-KCl-BaCl_2$ in the DC graphite arc furnace. For the assessment of the distribution of the radioactive nuclides during the melting of the aluminum, the aluminum materials were contaminated by the surrogate nuclides such as cobalt(Co), cesium(Cs) and strontium(Sr). The fluidity of aluminum melt was increased with the addition of the fluxes, which has slight difference according to the type of fluxes. The formation of the slag during the aluminum melting added the flux type C and D was larger than that with the flux A and B. The rate of the slag formation linearly increased with increasing the flux concentration. The results of the XRD analysis showed that the surrogate nuclide was transferred to the slag, which can be easily separated from the melt and then they combined with aluminum oxide to form a more stable compound. The distribution ratio of cobalt in ingot to that in slag was more than 40% at all types of fluxes. Since vapor pressures of cesium and strontium were higher than those that of the host metals at the melting temperature, their removal efficiency from the ingot phase to the slag and the dust phase was by up to 98%.