• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.832-840
• /
• 2019

To improve the electrochemical performances of the cathode materials, boron-doped $LiNi_{0.90}Co_{0.05}Ti_{0.05}O_2$ were synthesized by using concentration gradient precursor. The characteristics of the prepared cathode materials were analyzed by XRD, SEM, EDS, PSA, ICP-OES and electrical conductivity measurement. The electrochemical performances were investigated by initial charge/discharge capacity, cycle stability, C-rate, cyclic voltammetry and electrochemical impedance spectroscopy. The cathode material with 0.5 mol% boron exhibited a capacity of 187 mAh/g (0.5 C) in a voltage range of 2.7~4.3 V(vs. $Li/Li^+$), and an capacity retention of 94.7% after 50 cycles. In the relatively high voltage range of 2.7~4.5 V(vs. $Li/Li^+$), it showed a high capacity of 200 mAh/g and capacity retention of 80.5% after 50 cycles.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.2
• /
• pp.59-64
• /
• 2013

Using $Na_2CO_3$ and $MeSO_4$ (Me = Ni, Co and Mn) as starting materials, the precursor of $[Ni_{0.6}Co_{0.2}Mn_{0.2}]CO_3$ has been synthesized by carbonate co-precipitation. The precursor was mixed with $Li_2CO_3$, and calcined at 750, 850, and$950^{\circ}C$ in air. Effect of calcinations temperature on characteristics of $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$ cathode materials was investigated. The structure and characteristics of $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$ were determined by X-ray diffraction (XRD), Scanning electron microscopy (SEM) and electrochemical measurements. The X-ray diffraction (XRD) results show that the intensity ratio of $I_{(003)}/I_{(104)}$ increased and the R-factor ratio decreased with the increase of calcinations temperature. And Scanning electron microscopy (SEM) result show that the primary particle size increased. Especially, the $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$ calcined at $950^{\circ}C$ for 24 H shows excellent electrochemical performances with reversible specific capacity of $165.3mAhg^{-1}$ [cut-off voltage 2.5~4.3 V, 0.1 C($17mAhg^{-1}$)] and good capacity retention of 95.4% after 50th charge/discharge cycles[cut-off voltage 2.5~4.3 V, 1 C($170mAhg^{-1}$)].

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.106-106
• /
• 2010

CuO 나노입자는 전기화학적 전지, 가스 센서 및 태양전지와 같은 나노 전자소자에 응용할 수 있는 대단히 유용한 물질이다. CuO 나노구조를 형성하기 위한 방법은 솔-겔법, 전기 화학적 방법 및 전구체의 열적 탈착방법 등으로 연구되어 왔으나 CuO 나노입자의 열처리 효과는 상대적으로 연구가 미흡하다. 본 연구에서는 $Al_2O_3$ 기판 위에 스핀 코팅법과 열처리를 사용하여 형성한 CuO 나노입자의 물리적 성질을 살펴보았다. CuO 나노 입자를 형성하기 위해 methanol에 Cu(I) acetate (5 wt%) 을 적절히 분산한 용액을 $Al_2O_3$ 기판 위에 7000 rpm으로 스핀 코팅을 한 후 $300^{\circ}C$, $500^{\circ}C$ 및 $700^{\circ}C$로 각각 1 시간 동안 산소 분위기에서 열처리를 하였다. X-선 회절법 결과는 CuO의 (200)$K_{\alpha}$와 (400) $K_{\alpha}$ 회절에 해당하는 피크가 나타났고 주사 전자현미경 상의 결과는 CuO 나노입자가 형성되었음을 확인하였다. 나노입자의 크기는 고배율 투과 전자현미경상에 의하여 3-5 nm 인 것으로 확인하였고 300 K에서 측정한 광루미네선스 스펙트럼은 CuO의 주된 스펙트럼 피크가 푸른색 영역에서 나타남을 알 수 있었다. X-선 광전자 분광법 스펙트럼은 Cu $2p_{3/2}$와 O 1s의 전자상태를 보여주었으며 복잡한 산화상태를 갖는 CuO는 Cu-O 결합과 산소의 화학적 흡착상태를 가지는 것으로 확인되었다. 이러한 결과는 $Al_2O_3$ 기판 위에 최적화된 CuO 나노 입자의 형성 방법과 구조적, 광학적 및 전자적 특성을 이해하는데 도움을 제공해 줄 것이다.

• Korean Journal of Ichthyology
• /
• v.12 no.3
• /
• pp.173-179
• /
• 2000

Effects of Estradiol-$17\beta(E_2)$ and 2, 4-dichlorophenoxy acetic acid (2, 4-D) on vitellogenin(VTG) production were investigated in primary hepatocyte culture of olive flounder, Paralichthys olivaceus. Highest survival rate of hepatocyte were observed at $27^{\circ}C$, which markedly declined equal to 50% of those of $15^{\circ}C$. Vitellogenin production peaked at the concentration of $10^{-6}M\;E_2$. No effect was observed on VTG production at various concentrations of 2, 4-D. However, a low concentration of 2, 4-D (ie, $10^{-8}M$) only appeared increased VTG production. $E_2$ or $10^{-8}M$ 2, 4-D-primed VTG production was markedly inhibited by the addition of $10^{-6}M$ tamoxifen to the culture medium(P<0.01). Inhibition was not affected by combinational treatment with $10^{-6}M$ $E_2$ and $10^{-6}M$ 2, 4-D. These results from the current investigation suggest that 2, 4-D mimics $E_2$, but the mechanism of reaction in inducing the $E_2$ receptor are different in VTG production in oliver flounder hepatocytes.

• Journal of Life Science
• /
• v.14 no.5
• /
• pp.868-873
• /
• 2004

The efficient fermentative production of L-threonine fermentation was achieved by using Escherichia coli MT201, transformed a plasmid carrying pyruvate carboxylase gene. It is an attempt to supply oxaloacetate to the L-threonine biosynthetic pathway. In order to improve the L-threonine productivity of E. coli MT201, a plasmid pPYC which is an expression vector of the pyruvate carboxylase gene of Coryne-bacterium glutamicum, was introduced. When E. coli MT/pPYC was incubated with medium containing only glucose as a carbon source, both the cell growth and L-threonine production were reduced, compared to the results from fermentation of E. coli MT201. In order to circumvent this effect, we attempted the addition of a mixed carbon source, composed of glucose and sodium citrate at a ratio of 1.5:3.5. It was shown that L-threonine production and cell growth (OD660) with E. coli MT/pPYC reached up to 75.7 g/l and 48, respectively, at incubation for 75 hr under fed-batch fermentation conditions. It is assumed that overproduction of L-threonine by anaplerotic pathway leads unbalance of TCA cycle and sodium citrate might playa role to recover normal TCA cycle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1688-1694
• /
• 2014

Jeju Hallabong Tangor (Citrus kiyomi${\times}$ponkan) is a Citrus species with a variety of physiological properties such as anti-oxidant, anti-inflammation, anti-cancer, and anti-obesity. We investigated the anti-obesity effects of Hallabong Tangor peel extracts before (HLB) and after (HLB-C) bioconversion with cytolase based on modulation of adipocyte differentiation and lipid metabolism in 3T3-L1 adipocytes. Treatment with cytolase decreased flavanone rutinoside forms (narirutin and hesperidin) and increased flavanone aglycone forms (naringenin and hesperetin). During adipocyte differentiation, 3T3-L1 cells were treated with 0.5 mg/mL of Sinetrol (a positive control), HLB or HLB-C. Adipocyte differentiation was inhibited in both citrus groups, but not in control and Sinetriol groups. HLB and HLB-C tended to reduce insulin-induced mRNA levels of CCAAT/enhancer-binding protein ${\alpha}$ ($C/EBP{\alpha}$) and sterol regulatory element-binding protein 1c (SREBP1c). Compared to the control and Sinetrol groups, HLB and HLB-C markedly suppressed insulin-induced protein expression of $C/EBP{\alpha}$ and peroxisome proliferator-activated receptor gamma ($PPAR{\gamma}$). The HLB and Sinetrol groups, but not HLB-C group, significantly increased adipolytic activity with higher release of free glycerol compared to the control group in differentiated 3T3-L1 adipocytes. These results suggest that bio-conversion of Hallabong Tangor peel extracts with cytolase increases aglycone flavonoids. Irrespective of bioconversion, both Hallabong Tangor peel extracts exert anti-obesity effects that may contribute to prevention of obesity through inhibition of adipocyte differentiation or induction of adipolytic activity.

• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1109-1116
• /
• 2002

This study analyzed concentrations of volatile organic compounds (VOCs) produced from incineration of papers at $600^{\circ}C$. The papers used in this study included A4 papers (new, printed with ink-jet, printed with carbon), newspapers (printed with bean oil, printed with a general newspaper ink), packaging box, document envelope, single-use paper cup, and cosmetic tissue. Papers were heated from room temperature upto $600^{\circ}C$ providing air inside of the electric furnace and then they were oxidized for 80 minutes at $600^{\circ}C$ maintaining the same air supply. VOCs emitted from the incineration process were sampled using an air sampling pump and bags for 160 minutes and then the components and concentrations of the VOCs were analyzed by a CC-MS. The most prominent chemical structure of the Vous identified from incineration of the papers was furans and then furans were followed by aromatics and aliphatic alkenes. About 40% of the identified VOCs contained double bonds, which have relatively a high ozone (ground level) formation potential, within their molecular structure. Also, some cancer suspecting compounds like benzene, dichlorormethane and chloroform were identified.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.211-216
• /
• 1998

This study was carried out to how the effects of storage temperature of garlic bulbs, pH and temperature of garlic puree on its color change. Color change was severely appeared in puree made of garlics stored at pH 4.0, 2$^{\circ}C$ and pH 4.0, 25$^{\circ}C$. The color of garlic puree was changed from green to blue during storage. The yellowing occured by the oxidation at high temperature of puree. Garlic puree absorbed the wavelengths of 486nm. 580nm, and 656nm. The precursors of pigments produced by enzymatic reaction were seemed to be the reasons of color change because there was no my change of color in puree when the enzymes including alliinase were inactivated. However, the color changes of puree at low storage temperature should be studied further in the future.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.479-485
• /
• 2011

Pt-Bi/C catalysts supported on carbon black with various Pt/Bi ratios were synthesized by a reduction method. Chloroplatinic acid hydrate ($H_2PtCl_6{\cdot}xH_2O$) and bismuth (III) nitrate pentahydrate ($Bi(NO_3)_3{\cdot}5H_2O$) were used as precursors for Pt and Bi, respectively. Before loading metal on carbon, heat treatment and pretreatment of carbon black in an acidic solution was conducted to enhance the degree of dispersion. The physical property of the synthesized catalysts was investigated by X-ray diffraction and X-ray photoelectron spectroscopy. The XRD pattern of untreated Pt-Bi/C catalyst showed BiPt and $Bi_2Pt$ peaks in addition to Pt peaks. These results imply that Bi atoms were incorporated into the Pt crystal lattice by Pt-Bi alloy formation. The catalytic activity for methanol oxidation was measured using cyclic voltammetry in a mixture of 0.5 M $H_2SO_4$ and 0.5 M $CH_3OH$ aqueous solution. The addition of proper amount of Bi was found to significantly improve catalytic activity for methanol oxidation. The catalytic activity for methanol oxidation was closely related to the stability between electrode and electrolyte. In order to investigate the stability of catalysts, chronoamperometry analysis was carried out in the same solution at 0.6 V.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.218-223
• /
• 2010

The zinc oxide thin film, which can be applied as the gas sensor of a semiconductor type, was grown on the silicon substrate by CFR(continuous flow reaction) method in this study. The growth property and the electrical property of the zinc oxide thin films synthesized by CFR method were also investigated. Zinc acetate solutions of 0.005~0.02 M were used as the precursor for the preparation of zinc oxide thin films. The size of ZnO particles consisted on the zinc oxide thin film increased not only with increasing concentration of precursor, but also the thickness of thin film increased. The growth rate of zinc oxide thin film by CFR method was proportionably depend on the concentration of precursor and the uniform ZnO thin film was prepared when zinc acetate of 0.01 M is used as the precursor. The charged currents on the zinc oxide thin films were obtained as its electrical property by I-V meter, and increased agree with increasing the thickness of zinc oxide thin film. Thus, it was concluded that the charged current on the zinc oxide thin film can be controlled with changing concentration of precursor solution in CFR method. The charged currents on the zinc oxide thin films also decreased when ZnO thin film is exposed under hydrogen sulfide of 500 ppmv at $300^{\circ}C$ for 5 min. From these results, it could be confirmed that the zinc oxide thin film prepared by CFR method can be used for the detection of sulfur compounds.