• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.99-105
• /
• 1996

본 연구에서는 TIMA를 전구체로 하는 수직형 MOCVD 반응기를 대상으로 수학적 모델을 세우고 컴퓨터에 의한 수치모사를 수행하여 반응기 설계 변수 및 공정조건이 AI의 증착속도와 증착두께 분포에 미치는 영향을 알아보았다. 수학적 모델은 수직형 반응기를 축대칭으로 보아 2차원으로 수립하였으며 반응기내의 운동량전달, 열전달, 물질전달을 포함한다. 이 수학적 모델의 지배 방정식들에 대하여 Galerkin 유한요소법을 적용하여 수치적으로 반응기 내의 유체 흐름 구조, 온도분포와 반응물의 농도 분포를 구하였다. 수치모사 결과 AI의 증착속도는 반응기 압력이 0.47torr, 기판온도가 25$0^{\circ}C$, 유량이 7.5sccm일 경우, 190-230$\AA$/min로 나타났다.

• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.308-314
• /
• 2012

Two hundred and twenty three yeast strains were randomly isolated from Korean traditional $nuruk$. Among them, six urease producing yeast strains (designated JJA, JJB, JJ22, SHA, SHC and SH10) were selected on the Christensen urea agar plates. They showed the same pattern in the PCR-RFLP analysis of the ITS I-5.8S-ITS II region digested with $Hae$III and $HinF$1 restriction endonucleases. Its DNA sequences showed 100% (strains SHA, SHC and SH10) and 99.8% (strains JJA, JJB and JJ22) identity with those of $Issatchenkia$ $orientalis$ type strain ATCC 24210. Phylogenetic analysis resulted in that all the strains were closely related to $I.$ $orientalis$. Two representative strains, JJ22 and SH10, showing the highest urease activities were selected for further characterization. Their morphological, physiological and biochemical characteristics were also the same as $I.$ $orientalis$. Therefore, both the two strains were identified as $I.$ $orientalis$. They could grow at a wide range of temperature between $20-40^{\circ}C$ as well as pH between 2.0 and 10.0. However, a higher level urease activity were obtained at acidic pH than that at alkalic pH. The maximal level of urease activity was obtained at $30^{\circ}C$ (strain SH10) or $35^{\circ}C$ (strain JJ22) and in a liquid medium adjusted to the initial pH 5.0.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.558-567
• /
• 2001

본 연구에서는 알콕사이드를 전구물질로 하는 졸겔공정을 이용하여 Bi 과잉 12 mol%의 조성인 B $i_4$ $Ti_3$ $O_{12}$ 박막과 B $i_4$ $Ti_{3-x}$T $a_{x}$ $O_{12}$(x=0.1, 0.2, 0.3) 박막을 제조하였다. XPS 분석에 따르면 Ta 치환 x=0.2에서 Bi 4f의 photoemission 곡선이 낮은 결합에너지로 이동하였고 피크 강도가 감소하는 현상이 관측되었다. 이는 x=0.1과 0.2 사이에서 Bi-O 결합이 길어져 인장상태 하에 있었음을 나타내었다. B $i_4$ $Ti_3$ $O_{12}$(BIT) 박막의 유전상수와 유전손실은 100 kHz에서 340, 0.05이었고, B $i_4$ $Ti_{3-x}$T $a_{x}$ $O_{12}$ 박막에서 이들 값은 x=0.1에서 가장 높았으며, 각각 480, 0.13이었다. B $i_4$ $Ti_3$ $O_{12}$ 박막의 잔류분극과 항전계는 1.24$\mu$C/$ extrm{cm}^2$, 31.4 kV/cm 이었으나, Ta 치환 x=0.2에서 이들 값은 각각 19.7$\mu$C/$\textrm{cm}^2$, 49.5 kV/cm 에 이르렀다. 또한, B $i_4$ $Ti_3$ $O_{12}$ 박막의 누설전류 밀도는 ~$10^{-6}$ A/$\textrm{cm}^2$ 정도이었으며, Ta 치환은 누설전류를 감소시켜 Ta 치환 x=0.2 이상에서 BIT 박막에 비해 한 차수 정도 낮아졌다. Ta 치환에 따른 B $i_4$ $Ti_3$ $O_{12}$ 전기 물성에서 변화는 Bi-O 결합에서 관측된 인장상태로의 전이와 연관성이 있었으며, 덧붙여 치환에서 생성된 전자에 의한 정공보상이 이에 영향을 끼쳤다. 정공보상이 이에 영향을 끼쳤다.끼쳤다.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.422-428
• /
• 1999

A transformat Alcaligence eutrophus GA5 harboring phbC gene from A. latus was cultivated for production of Poly(3-hydroxybutyrate-4-hydroxybutyrate)[P(3HB-4HB)] containing high molar fraction of 4-hydroxybutyrate(4HB)] containing high molar fraction of 4-hydroxybutyrate(4HB). Transformation did not influenced significantly on total cell growth, on total cell growth, concentration, and content of P(3HB-4HB), however, significantly influenced on 4HB molar fraction in P(3HB-4HB) increasing from 12.3 to 23.5 mol% after 48 h cultivation in two-stage using 1.0%(W/V) of ${\gamma}$-butyrolactone as a precursor compare to parent strain. Above increment may be due to the accelerated polymerization between 3HB and 4HB converted from precusor compound by amplified phbC gene. Citrate increased remarkbly total cell mass and P(3HB-4HB) concentration, but did not influenced on the molar fraction of 4HB, meanwhile, magnesium ion influenced on P(3HB-4HB) concentration and 4HB molar fraction significantly. The two-stage cultivation method was modified, in such a way minimizing P(3HB) accumulated inside of cell grown at first-stage, consquently, 26.3% of P(3HB-4HB) containing 61.0 mol% of 4HB fraction was obtained after 72hr. Furthermore, semi-homopolymeric P(4HB) containing 92.0 mol% of 4Hb was obtained, and its structure was confirmed by $^1$H-NMR.

• Applied Biological Chemistry
• /
• v.35 no.3
• /
• pp.157-164
• /
• 1992

In order to produce nicotinamide adenine dinucleotide (NAD) which is a pyridine nucleotide coenzyme, Saccharomyces sake KBA No. 6 having high NAD content was selected from 12 strains of yeast and various factors affecting the production of NAD were investigated. For NAD production, 4% of glucose was effective as a carbon source and 2% of bactopeptone was the best nitrogen source. The optimum pH and temperature was 5.0 and $30^{\circ}$, respectively. Also, when 4 mg/ml of nicotinamide and 3 mg/ml adenine were used as precursors simultaneously, NAD production was the best. To increase NAD production, 2 valence metal ions were used during cultivation and $Zn^{2+}$ was very efficient. Among the surface active agents, anionic sodium dodesyl sulfate (SDS) was effective. Under the optimum conditions, the maximum amount of produced NhD was 35 mg/100 ml medium after cultivation of 144 hrs and 89% of total NAD amount, 31 mg of NAD, was leaked into culture broth.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.148-148
• /
• 2009

반도체 소자의 크기가 45 nm 이하로 감소함에 따라 최소 선폭에 따른 다층 배선 연결 구조가 요구되고 있다. 그러나 고집적화 구조는 기생 저항과 정전 용량에 의한 신호지연증가 및 혼선 전력 소모의 문제가 발생한다. 이런 문제를 해결하기 위한 방법 중의 하나는 저저항 배선연결물질과 층간 절연막으로 저유전 상수를 갖는 물질을 사용하는 것이다. 본 연구는 DEMS $(H-Si(CH_3)(OC_2H_5)_2)$ 전구체를 이용하여 저유전막을 증착할 때 사용되는 PECVD (plasma enhanced chemical vapor deposition) 장비를 국내 기술로 개발하고 개발된 장비로 저유전박막을 평가한 것에 관한 것이다. 본 연구에서 평가 및 박막 종확 시 사용한 장비는 MAHA hp 1 type ((주)아토)로서 양산용 PECVD 장비이다. 변수는 C-He의 유랑, 300 mm Si 웨이퍼와 shower head 사이의 거리, 증착 압력, 구동 전력이고, 증착된 저유전막의 두께, 두께의 균일성, 굴절률, 굴절률의 균일성를 평가하였다. 구동 전력이 500W 일 때, C-He의 유량과 진공의 크기를 감소시키면 박막의 두께가 감소하고 박막의 균일성은 증가하였다. C-He의 유량을 증가시키고 shower head 와 Si 웨이퍼 사이의 거리 및 구동 압력을 감소시키면 굴절률과 굴절률의 균일성이 모두 저하되었다. 구동 전력이 700W 일 때, 박막 두께의 경우, 구동 전력이 500W 일 때의 결과와 유사하지만, 박막의 균일성, 굴절률, 굴절률의 균일성은 모든 조건에서 저하되었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.4
• /
• pp.412-418
• /
• 2007

The purpose of this study was to determine the several factors for affecting chlorine disinfection by-products(DBPs) characteristics by reacting chlorine and organic matters in the aquatic phase. The results of this research yield the following specific conclusions: The concentration of trihalomethanes(THMs) was increased with increasing dissolved organic carbon(DOC), and a trend of THMs formation was parabolic with increasing organic matters. Formations of THMs increased straightly for the first 4 hours and the amounts of producted THMs for the 30 minutes were up to $25\sim43%$ in the entire experiment periods(168 hours). When keeping up the concentration of organic matters at constant and changing that of bromide, the quantity of formed THMs did not show distinguished difference with the reaction times. THMs were gradually increased at $4^{\circ}C$ even though a reaction phase was parabolic formation(PF) phase. However, THMs were increased rapidly in the instantaneous formation(IF) phase and then became slowdown in the PF phase between $20\sim35^{\circ}C$. THMs were gradually increased although entering in the PF phase at pH 5. However, THMswere increased rapidly in the IF phase and then became slowdown in the PF phase at pH 7 and pH 9, and these treads were much more clear at pH 9 than at pH 7.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.357.2-357.2
• /
• 2014

Ruthenium (Ru) 박막은 우수한 화학적 열적 안정성 및 높은 일함수(4.7eV) 특성으로 인해 20 nm급 이하의 차세대 DRAM capacitor의 전극 물질 및 Cu metalization을 위한 seed layer로 각광을 받고 있다. Ru박막의 나노스케일 정보전자소자로의 적용을 위해서는 두께제어가 용이하고 3D 구조에서 우수한 단차 피복 특성을 갖는 atomic layer deposition (ALD)을 이용한 박막 형성이 필수적이다. 이에 본 연구에서는 ALD 방법을 이용하여 0가의(cymene) (1,5-hexadiene) Ru (0) (C16H24Ru) 전구체를 합성, ALD 방법을 이용하여 우수한 초기성장거동을 갖는 Ru 박막을 증착 하였다. 형성된 Ru 박막의 표면 형상, 두께, 밀도를 주사전자현미경(Scanning electron microscopy)과 X-선 반사율 측정(X-ray reflectometer)으로 조사하였다. 또한 전기적 특성을 4침법(four-point-probe)으로 측정하였고, 박막의 화학적 조성과 결정성의 정보를 X-선 광전자분광법(X-ray photoelectron spectroscopy)과 X-선 회절(X-ray diffraction)을 이용하여 확인하였다.

• Journal of Aquaculture
• /
• v.9 no.1
• /
• pp.83-92
• /
• 1996

This study was conducted to compare the immunochemical properties of female-specific serum proteins (vitellogenin, VTG) and egg yolk proteins in female fusilier, Caesio diagramma. VTG of fusilier was identified and characterized by using immunochemical analysis. Two types of VTG (VTG1 and VTG2) reacted clearly with antiserum against egg proteins, were confirmed in the serum of mature female. The results of sephacryl S-300 showed that the molecular weights of VTG1 and VTG2 were 560,000 and 410,000, respectively. Yolk proteins, E2 and E3, were isolated from egg extracts, and molecular weights of them were estimated 410,000 and 170,000, respectively. The treatment of $17\beta$-estradiol ($E_2$) to males has induced the synthesis of VTG of which immunological characteristics seems to be similar to the yolk proteins. The results suggest that VTG can be synthesized in the liver by the action of $E_2$ stimulation, and incorporated into the oocytes through the blood circulation. The level of serum $E_2$ was moderately high throughout the spawning period of June. The level of serum VTG was also sustained at high in May and June. The concentration changes of serum $E_2$ and VTG were corelated to the ovarian development in female fusilier. The results indicated that $E_2$ may have some important roles for the vitellogenesis in female fusilier. Also) the VTG can be a precursor protein of yolk not only because it could be synthesized in the liver then incorporated into the oocytes but also because an egg yolk protein had the similiar molecular weights and antigenecity with VTG.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.37-43
• /
• 2018

Optimization of the lactic acid fermentation process was carried out to produce an old antler extract fortified with ${\gamma}$-aminobutyric acid (GABA). An old antler extract (OAE; 5%, w/v) obtained using a herbal extractor showed the highest contents of solids (1.75%) and proteins ($980{\mu}g/mL$). It also showed the highest total amino acid contents of $13,659{\mu}g/mL$, with glycine, proline, and glutamine concentrations of 1,945, 3,405, and $1,641{\mu}g/mL$, respectively. For the over-production of GABA, OAE was fermented with Lactobacillus plantarum EJ2014 in the presence of 0.5%, 1.5% glucose, and 3.5% MSG at $30^{\circ}C$ for 7 days. The fermented OAE showed high viable cell count of $2.0{\times}10^8CFU/mL$, pH of 6.56 and 0.77% acidity after 7 days. In particular, the acidity was greatly decreased by fermentation for 3 days, and 1.4% GABA was produced by the efficient conversion of the substrate, mono sodium glutamate.