• Journal of the Korean Magnetics Society
• /
• v.24 no.5
• /
• pp.140-145
• /
• 2014

We analyzed the MnIr thickness dependence of torque signals measured in exchange coupled CoFe/MnIr ($t_{AF}$) bilayers. The measured torque signals were compared with calculated ones by Stoner-Wohlfarth model. The exchange coupling anisotropy $J_c$ was considered for the model calculation between ferromagnetic (F) and antiferromagnetic (AF) layers with uniaxial anisotropy constant of $K_F$ and $K_{AF}$, respectively. The rotational losses were appeared in the range of $0.5t_c$ < $t_{AF}$ < $t_c$ ($=J_c/K_{AF}$) by the unpinned AF layer. While, the unidirectional anisotropy ($J_k$) was caused by the pinned AF layer at $t_{AF}$ > $t_c$. The critical thickness of MnIr layer was $t_c$ = 3.4 nm in CoFe/MnIr bilayers. The rotational losses behavior as shown in $t_{AF}$ = 3 nm sample were explained by the random orientation of the easy axis of AF grains. The unidirectional anisotropy obtained from torque signal of $t_{AF}$ = 10 nm sample was $J_k=0.63J_c$. Thus, the unidirectional anisotropy can be enhanced up to $J_k=J_c$ by aligning the AF easy axis.

• Korean Journal of Poultry Science
• /
• v.24 no.1
• /
• pp.1-8
• /
• 1997

The effects of genetic, physiological, and environmental factors(temperature, and type of watering system) on growth factors, accumulation of abdominal fat(AF), and the association between growth factors and AF of broilers and Athens-Canadian Randombred (ACRB) were studied in a series of nine trials. The final BW(6 or 7 wk) and 4-6 or 5-7 wk gain (G) were greater in groups raised at 21.1˚C than 26.7˚C. There was no consistent effects of environmental temperature on feed conversion ratio (FCR) although the FCR was significantly (P$\leq$.o5) reduced in 21. 1˚C group compared with the 26.7˚C group in two of six trials. The overall mean weight of AF relative to BW at 43 or 50 days of age were not significantly different between temperature groups: the means of AF of 21.1˚C and 26.7˚C groups were 1.81 and 1.78%, respectively. Environmental temperature had no consistent effect on the relationship between 4-6 or 5-7 wk C and 43 or 50 days AF, and 4-6 wk FCR and 43-days AF ; however, the association of 50 days AF with 5-7 wk FCR was highly significant in both temperature groups. The overall mean of correlation coefficient between FCR and AF was very low (r=.107). The waterer types did not significantly affect the AF. Generally, the effect of sex on the relationship between G and AF was not consistent in both sex groups. However, the association of AF with G was much greater in ACRB group compared with broiler group. The initial body weights (4 or S wk) was significantly (P$\leq$.001) correlated with AF in ACRB group, but not in the broiler groups. The effect of sire on AF was very high(P$\leq$.0001) in five of six trials.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.389-397
• /
• 2017

Friedel's salt is an important product of chemical adsorption between cement hydrate and chloride ions because it contains chlorine in its structure. When cement reacts with water in the presence of chloride ions, the $C_3A$ phase, and $C_4AF$ phase react with chloride to produce Friedel's salt. If chloride ions penetrate into concrete from external environments, many calcium aluminate hydrates, including AFm, can bind chloride ions. It is very important, therefore, to investigate the chloride binding isotherm of $C_3A$ phase, $C_4AF$ phase, and AFm phase to gain a better understanding of chloride binding in cementitious materials. Meanwhile, the adsorption isotherm can provide us with the fundamental information for the understanding of adsorption process. The experimental results of the isotherm can supply not only the quantitative knowledge of the cement-Friedel's salt system, but also the mechanism of adsorption and the properties of their interactions. The purpose of this study is to explore the time dependant behaviors of chloride ions adsorption with $C_3A$, $C_4AF$ and AFm phases. The chloride adsorption isotherm was depicted with Langmuir isotherm and the adsorption capacity was low in terms of the stoichiometric point of view. However, the chloride adsorption of AFm phase was depicted with Freundlich isotherm and the value was very low. Since the amount of the adsorption was governed by temperature, the affecting parameters of isotherm were expressed as a function of temperature.

• Journal of the Korean Magnetics Society
• /
• v.27 no.1
• /
• pp.30-34
• /
• 2017

In this report, we calculated the angular dependence of exchange bias ($H_{ex}$) by using single domain model in exchange coupled ferromagnetic (F)/antiferromagnetic (AF) bilayers, which results with AF thickness ($t_{AF}$) were used for the analysis of measured ones in NiFe/MnIr bilayers. Angular dependence of $H_{ex}$ calculated at $t_{AF}$ > $t_c$ showed typical unidirectional behaviors, however, calculated one at $0.5t_c$ < $t_{AF}$ < $t_c$ showed peculiar angular behaviors by fixed AF spins at specified angle near ${\theta}_H=90^{\circ}$. Angular dependence of $H_{ex}$ measured in NiFe/MnIr (20 nm) bilayers showed typical unidirectional behaviors. However, measured one in NiFe/MnIr (4 nm) bilayers showed mixed behaviors including both of unidirectional and peculiar angular behaviors, which was explained by the grain size distribution of polycrystalline MnIr.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1055-1063
• /
• 1990

The early hydration characteristics of the system $C_3S-C_3A-C_4AF$ according to the clinker composition variations, in order to establish the mutual interactionof clinker minerals during the portland cement hydration, have been studied. The early hydration rate of $C_3S$ was greatly effected by the change of $C_3S/C_3A$ ratio. The lower the $C_3S/C_3A$ ratio was, the faster the apex reaching time and the rate of heat liberation of the 2nd exothermic peak originating from the formation of $Ca(OH)_2$ were. The effect of $C_3S/C_3A$ ration on the amounts of $Ca(OH)_2$ formation was decreased, in process of hydration time, but the effect of $C_3S$ content was increased.

• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.13-17
• /
• 2005

As a basic study for recycling molten converter slag as an ordinary portland cement (OPC) by a conversion process, the reaction mechanism and the rate of the formation of $C_4AF$ which is one of the main components of OPC were investigated. The converter slag whose basicity was controlled by adding reagent grade $SiO_2$ was melted and hold for 30 minutes in MgO crucible at $1300^{\circ}C{\sim}1350^{\circ}C$. Then, the sintered CaO pellet heated at the same temperature was dipped into the molten slag and hold for $10{\sim}30$minutes. After the reaction, the crucible was cooled in air and the specimen was cut off to the horizontal direction of the crucible. The dissolution rate of $C_3A$ pellet was measured by the change of radius of the sintered $C_3A$ pellet, and the formed phase of $C_4AF$ was observed by SEM/EDX. As a result, the dissolution rate of $C_3A$ pellet into molten slag was increased from $0.75{\times}10^{-4}(cm/sec)$ at $1300^{\circ}C$ to $1.67{\times}10^{-4}(cm/sec)$ at $1350^{\circ}C$, and the mixed layer of $C_4AF$ and $C_{12}A_7$ was found between slag and $C_3A$ pellet.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.57-67
• /
• 1969

1) Many bacterial strains identified as Bacillus megeterium, Bacillus subtilis and Bacillus licheniformis were aboundantly found in summer jokal kimchi, but the most dominant strains in summer kimchi were Lactobacillus plantarum and Loctobacllus buchneri. 2) Bacillus groups found in kimchi were sensitive in a low concentration of AF-2, but groups of lactic acid bacteria were resistant to a high concentration of AF-2. 3) Allowable concentration of AF-2 in Korean kimchi is less than 10 p.p.m. 4) AF-2 was not suitable for the juicy kimchi as a preservative because the color of juicy kimchi was somewhat changed into orange red when 10 p.p.m. of AF-2 was added. 5) High concentration of AF-2 leads the hetero-fermentation of kimchi bacteria to the homofermentation. 6) Microflora of kimchi was influenced even in the concentration of 10 p.p.m. but it was impossible to check the acidification of kimchi in summer with 50 p.p.m. concentration of AF-2. 7) About 25% of AF-2 was consumed in kimchi fermentation for day at $23^{\circ}-25^{\circ}C$.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.2
• /
• pp.155-161
• /
• 1992

Although glycosylated liposomes have attracted much attention as targeting delivery systems (DDS) of drugs to specific organs which have glycoside receptors, physical instability of liposomes greatly limits their practical application. In this case, proliposomes might be a potential answer to solve this problem. Utilizing the proliposomes as tageting DDS has been a goal of our series of works; we have tried to develop DDS which form liposomes uppon adding water and can deliver drugs to specific target organs/cells such as hepatocytes. In this paper, preparation of glycosylated liposomes and binding of the liposomes with lectin (agglutinin RCA 120) was studied. Asialoletuin (AF) was selected as a model compound which has galactose terminal and is favorable for binding with galactose receptor on the surface of hepatocytes. AF was obtained by splitting the terminal N-acetylneuraminic acid (NANA) of fetuin. Small unilamellar AF-liposomes were prepared by mixing aqueous solution of AF-palmitate with thin film of phosphatidyl choline and cholesterol (30:10 w/w) formed on the innersurface of the round bottomed flask. They were successively extruded through polycarbonate membranes (0.45 mm). Palmitoyl-AF not incorporated into the liposomal bilayer was separated from liposomes by a Sepharose 4B column equilibrated with 10 mM Tris-HCI buffered saline. Lectin (agglutinin RCA 120) was added to the suspension of AF-liposomes and incubated at $37^{\circ}C$ for 2 hr. After centrifugation, the unbound lectin in the supernatant was assayed for protein. The binding of the lectin to AF-liposomes (AF content 2.8 nmole) at $37^{\circ}C$ was linear at least upto 35 mg of lectin indicating high affinity association of the lectin to AF molecules of the liposomes.

• East Asian mathematical journal
• /
• v.4
• /
• pp.203-211
• /
• 1988

• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.288-294
• /
• 1986

The effects of ginseng saponin and its related materials on aflatoxin production by Aspergillus parasiticus NRRL2999 in yeast extract sucrose (YES) medium were studied. Maximal production of aflatoxins by the mold in the medium occurred after 9 days at $28^{\circ}C$. When various concentrations of ginseng saponin were added to the medium aflatoxin productions were significantly reduced (p<0.05) compared to the control after 9 days at $28^{\circ}C$. 0.05% of saponin in the medium greatly decreased aflatoxin synthesis, and no aflatoxins were synthesized by the mold in the medium contained 5.0% of saponin. When various concentrations of saponin diol and triol were added to the medium both ingibitory and sitimulatory effects on alfatoxin production were resulted. Saponin fraction numbers of 1, 2, 4, 5 and 6 decreased aflatoxin production, however the numbers of 3 and 7 stimulated the toxin production. 0.05% of adenosine, guanosine, caffeine and xanthosine in the media inhibited aflatoxin production (p<0.05), but adenine and cytosine increased the production. When 5.0% of saponin was added to the medium aflatoxins were not synthesized at all, but total lipid synthesis and mold growth were highly stimulated. Both the synthesis of total lipid and mold growth were reduced in case of aflatoxin synthesis stimulated.