• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.165-169
• /
• 2015

In this paper, in order to develop the composition ceramics with the excellent dielectric properties, $Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3$ ceramics were fabricated by the conventional solid-state method. The effects of ZnO addition on their microstructure and piezoelectric properties were systematically investigated. The rhombohedral-tetragonal phase coexistence has been found in the ceramics without ZnO content and then with further increasing ZnO content, specimens exhibited tetragonal phase. The optimized ZnO content formed liquid phase and aided the grain growth of specimens. When 0.4 wt% ZnO was added, the optimal physical properties ($d_{33}=422pC/N$, $d_{31}=161pC/N$, ${\varepsilon}_r=1,905$, $k_p=0.55$, $Q_m=160$) were obtained.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.23-23
• /
• 2017

Rice (Oryza sativa L.) is the world's most important cereal crop. In crop plant, chlorophyll content and leaf senescence could affect grain filling and yield. We analyzed a QTL associated with chlorophyll content and delayed leaf senescence using high chlorophyll near isogenic line (HC-NIL). HC-NIL derived from a cross between Oryza sativa cv. Hwaseong as a recurrent parent and wild species O. grandiglumis as a donor parent showed higher chlorophyll content than Hwaseong. To identify QTL associated with chlorophyll content, 58 $F_3$ and 38 $F_4$ lines were developed from a cross between HC-NIL and Hwaseong. For QTL analysis, simple sequence repeat (SSR) markers were used for genotyping and one-way ANOVA was conducted. A QTL for chlorophyll content (qCC2) was detected in chromosome 2 and explained 24.63% of phenotypic variation. The senescence effect of the qCC2 was examined in dark-induced incubation (DII). Detached leaves from Hwaseong and HC-NIL were incubated on 3mM MES buffer (pH 5.8) at $27^{\circ}C$ under complete dark condition. After 3 days of incubation, the Hwaseong leaves turned yellow, but the HC-NIL leaves were green. HC-NIL has higher chlorophyll content with delayed senescence than Hwaseong. These results indicated that qCC2 is associated with stay-green phenotype. To know whether the qCC2 is responsible for leaf functionality, ion leakage test and Fv/Fm measurement were performed. Both experiment results showed that differences were observed between Hwaseong and HC-NIL but it was not statistically significant. These results might suggest that the qCC2 is possibly related to chlorophyll content and non-functional stay-green phenotype.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.592-595
• /
• 1996

A silane dendrimer with 48 allylic end groups has been synthesized in excellent yield, via repetitive alkenylation-hydrosilation cycles. Starting with hexaallylethylenedisilane ((CH2=CHCH2)3SiCH2)2 as the core molecule (G0), a succession of alternate platinum catalyzed hydrosilation (Pt/C, 10% platinum content on active carbon) of all allyl groups with methyldichlorosilane and the allylation of all SiCl2 groups with allylmagnesium bromide in THF provided 3rd generation (G3) as carbosilane dendrimer. All the generations of dendrimer have been characterized by 1H and 13C NMR spectroscopy as well as elemental analysis.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.321-326
• /
• 2001

In the present study, $Si_3N_4-SiC$ ceramic composites that contained up to 20 wt% of dispersed SiC particles were fabricated via hot-pressing with an oxynitride glass. The microstructure, the mechanical properties, and the cutting performance of resulting ceramic composites were investigated. By fixing the composition as $Si_3N_4-20$ wt% SiC, the effect of sintering time on the microstructure, the mechanical properties, and the cutting performance were also investigated. For machining of gray cast i개n, the tool life increases with increasing the amount of SiC content in the composites; The tool life also increased with increasing the sintering time. The tool life of the home-made cutting tools was very close to that of commercial $Si_3N_4$ cutting tool. The superior cutting performance of $Si_3N_4-SiC$ ceramic cutting tools suggests the possibility to be a new ceramic tool material.

• Korean Journal of Food Science and Technology
• /
• v.8 no.2
• /
• pp.80-84
• /
• 1976

Two varieties, Lasoda and Sebago potatoes, were studied. Different cooking methods, conventional oven baking at $218^{\circ}C$ and microwave oven baking, have been used to compare the retention of the phenolic compounds. Peeled cortex samples of fresh and cooked potatoes were analyzed for total phenols, phenolic constituents, and moisture loss. Phenolic content was higher in fresh potatoes than in cooked potatoes. Laasoda had higher phenolic content (3. 63mg) than Sebago (1. 71mg). Potatoes with higher phenols (Lasoda) also had larger quantities of chlorogenic acid. There was a greater moisture loss in conventional oven baking potatoes than in microware oven.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.129-138
• /
• 1992

The effects of dietary levels of lysine and energy on growth performance, the content of DNA, RNA and protein in liver, thigh muscle composition and nutrient utilization in broiler chicks were investigated in an experiment involvies with 2 levels of dietary energy : 3,200 (2900) 2,900 (2700) kcal ME/kg) and 6 levels of lysine : 0.6(0.5), 0.8(0.7), 1.0(0.9), 1.2(1.1), 1.4(1.3), and 1.6(1.5)% was carried out. A total number of 384 male broiler chicks was used for a period of 7 weeks. Body weight gain of 1.0(0.9)% lysine level group was significantly (p < 0.01) higher than that of any other groups. Interaction between lysine and energy in the feed intake was observed (p < 0.05). Present data indicate that the content of DNA in liver tissues was significantly (p < 0.05) different by the levels of lysine, namely, 1.0(0.9)% or 1.2(1.1)% lysine level groups showed higher content than other groups (p < 0.01). Dietary levels of 1.2(1.1)% or 1.6(1.5)% lysine groups showed the highest protein content in thigh muscle tissues than that of any other groups (p < 0.05). Interaction between energy and lysine in the content of protein of thigh muscle tissues was shown (p < 0.01). The level of 0.6% lysine group showed the highest fat content in thigh muscle tissues than any other groups. Interaction between lysine and energy in the content of crude ash and crude fat of thigh muscle tissues was observed (p < 0.01). Apparent amino acid availability of arginine, glycine and threonine (p < 0.01), phenylalanine (p < 0.05) were significantly affected by the levels of lysine and interaction between lysine and energy was found only in arginine (p < 0.01).

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.3
• /
• pp.184-190
• /
• 2013

This study was carried out to investigate ginsenoside content in different root parts and the correlation between root diameter and ginsenoside composition of Panax ginseng C. A. Meyer cultivated by direct seeding. The unit contents of ginsenoside were 29.65, 28.76, 26.34 mg/g, respectively in 4, 5, 6 years old. However, the total contents of ginsenoside were 431.97, 606.56, 657.80 mg/root, respectively. Total ginsenoside content of fine root was higher than that of main root and lateral root. These tendencies were related to decrease by the increase of root diameter. When diameter of main root and lateral root were the same in different ages, the total ginsenoside content was higher in the order of 4 > 5 > 6 years old roots. Except for ginsenoside-Rg1, other ginsenosides components (PD/PT and total ginsenosides) had highly negative correlation with the root diameter within whole root, main root, lateral root and fine root, which indicated that ginsenoside content is correlated to root diameter. As results, it is suggested that ginsenoside content can be predicted.

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.3-8
• /
• 1975

Hydration processes of the rapid hardening cement clinkers, which were synthesized from domestic alunite for major alumina source, limestone, kaolin and fluorite, were investigated by means of x-ray diffraction analysis, thermal analysis and microscopic observation etc. The clinkers were composed mainly of alite, calcium fluroaluminate (C11A7.CaF2) minerals. While the hydratio processes of the clinkers are altered by concentration of SO3 in the paste, calcium aluminate hydrates such as C4AH13, CAH10 and calcium monosulfate hydrate (C3A.CaSO4.12H2O) are formed at first and then some of them are transformed into ettringite(C3A.3CaSO4.32H2O) within 30~60 min. when the concentration of SO3 in the paste are enough. However the formed ettringite are changed slowly into calcium monosulfate hydrate as the concentration of SO3 become lowered, and the paste is hardened with these close-packed minerals. When the content of SO3 in clinker is so enough, calcium sulfoaluminate hydrates are found without any addition of anhydrite or hemi-hydrite.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.3
• /
• pp.380-385
• /
• 2016

This study analyzed changes in ${\beta}$-glucan content in Agaricus blazei Murill concentrates according to extrusion and extraction conditions. Screw speed and feed rate were fixed to 250 rpm, and 100 g/min, respectively. Moisture contents (20 and 30%) and barrel temperature (130 and $140^{\circ}C$) were adjusted. ${\beta}$-Glucan content of the extruded sample at a moisture content of 20% and barrel temperature of $130^{\circ}C$ was higher compared to other extrusion conditions. ${\beta}$-Glucan content of the extruded sample at a moisture content of 20% and barrel temperature of $130^{\circ}C$ treated with Rohament CL enzyme was higher compared to Viscozyme L, and Plantase TL enzyme treatments under the same extrusion conditions. In conclusion, extrusion and pretreatment with Rohament CL enzyme enhanced yield of ${\beta}$-glucan extract.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.310-316
• /
• 2010

Nanoparticle with antimicrobial property has been applied to various fields. This study added silver/platinum nanoparticles to HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone) and MMA (methylmethacrylate) in various concentrations and copolymerized by heating at $70^{\circ}C$ for 40 minutes, $80^{\circ}C$ for 40 minutes, and finally, $100^{\circ}C$ for 40 minutes. The particle size of used nano silver and platinum was 10 ~ 20 nm respectively. Using the polymer produced through the copolymerization process, the authors have produced a contact lens and measured the physical characteristics which showed water content of 34.29 ~ 39.00%, refractive index of 1.422 ~ 1.430, visible transmittance of 78.8 ~ 92.5% and tensile strength of 0.149 ~ 0.179 kgf. The ophthalmic lens material produced using silver/platinum nanoparticles satisfied the basic physical properties required for contact lens application.