• 한국환경복원기술학회지
• /
• 제14권5호
• /
• pp.53-67
• /
• 2011

The major objective of this study was to quantify the effects of substrate depth and substrate composition on the development of sedum etc., in a sloped rooftop (6 : 12 pitch) environment during a 4-year period. The experiment was conducted from 2006 October to 2010 December under several conditions without soil erosion control : two substrate depth (5cm, 10cm), four substrate composition (A5N3C2, A3N3C4, A6C4, G5L3C2: A: artificial lightweight soil, N : natural soil, G : granite decomposed soil, C : leave composite, L : loess), four sloped roof direction ($E40^{\circ}W$, $W40^{\circ}N$, $S40^{\circ}W$, $N40^{\circ}E$). In this experiment 4 sedum etc., were used: Sedum sarmentosum, Sedum kamtschaticum, Sedum rupestre, Sedum telephium, flowering herbs (mixed seed : Taraxacum platycarpum, Lotus corniculatus, Aster yomena, Aster koraiensis), western grasses (mixed seed : Tall fescue, Creeping redfescue, Bermuda grass, Perennial ryegrass). The establishment factor had two levels : succulent shoot establishment (sedum), seeding (flowering herbs, western grasses). 1. Enkamat, as it bring about top soil exfoliation, was unsuitable material for soil erosion control. 2. Sedum species exhibited greater growth at a substrate depth of 10cm relative to 5cm. All flowering herbs and western grasses established only at a substrate depth of 5cm were died. A substrate depth of 5cm was not suited in sloped rooftop greening without maintenance. If additional soil erosion control will be supplemented, a substrate depth of 10cm in sloped rooftop greening without maintenance was considered suitable. 3. For all substrate depth and composition, the most abundant species was Sedum kamtschaticum. The percentage of surviving Sedum kamtschaticum was 73.4% at a substrate depth of 10cm in autumn 2007 one year after the roof vegetation had been established. But the percentage of surviving other sedum were 33.3%~51.9%, therefor mulching for soil erosion control was essential after rooftop establishment in extensive sloped roof greening was proved. To raise the ratio of plant survival, complete establishment of plant root at substrate was considered essential before rooftop establishment. 4. There was a significant interaction between biomass and substrate moisture content. There were also a significant difference of substrate moisture and erosion among substrate composition. The moisture content of A6C4 was highest, the resistance to erosion of A5N3C2 was highest among substrate composition. The biomass of plants were not significantly higher in A5N3C2 and A6C4 relative to A3N3C4 and G5L3C2, For substrate moisture and erosion resistance, A5N3C2 and A6C4 were considered suitable in sloped rooftop greening without maintenance. 5. There were significant difference among roof slope direction on the substrate moisture. Especially, the substrate moisture content of $S40^{\circ}W$ was lower relative to that of $N40^{\circ}E$, that guessed by solar radiation and erosion.

• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.1014-1021
• /
• 1998

We evaluated the effect of processing variables on microstructural evolution interface irregularity between Ag sheath and superconductor core and resultant critical current density(J$_{c}$) of (Bi,Pb)$_2$Sr$_2$Ca$_2$Cu$_3$O$_{x}$(2223) superconductor tape. The value of J$_{c}$ was significantly influenced by the interface irregularity, degree of texturing and relative 2223 content. The interface became more irregular(sausage effect), while the degree of texturing gradually improved as the dimension of tape decreased during forming process. As the dimension of wire/tape were changed from diameter of 3.25 mm to thickness of 0.20 mm, J$_{c}$ value was observed to be increased by 10 times. In addition, optimum sintering temperature for improved J$_{c}$ was observed to be 835$^{\circ}C$ in a ambient atmosphere probably due to combined effect of both improved texturing and high 2223 content. Microstructural investigation showed the degree of texturing was degraded by the existence of both second phases and interface irregularity. It was observed that larger grain size and better texturing was developed near relatively flat interface compared to those inside superconducting core.ting core.

• 한국작물학회지
• /
• 제54권3호
• /
• pp.287-293
• /
• 2009

본 연구는 홍삼 추출기를 이용하여 기능별 사포닌의 함량 및 품질의 최적화 조건을 설정하기 위하여 실시하였다. 홍삼 추출액의 총 사포닌 함량은 $75^{\circ}C$에서 18시간 추출한 용액이 64.6 mg / 100 ml로 최고 함량을 나타냈고 추출 온도와 시간이 증가할수록 감소하였다. $Rb_2$와 Re 함량은 $75^{\circ}C$에서는 12시간 추출한 홍삼액이 11.8 mg / 100 ml로 가장 많았고 추출시간과 추출온도가 증가할수록 급격히 감소하였다. Prosapogenin 함량은 $85^{\circ}C$에서 24시간 추출한 홍삼액이 34.9 mg / 100 ml로 가장 많았고, $75^{\circ}C$와 $85^{\circ}C$에서는 추출 시간이 길어짐에 따라 증가하는 경향이었으나 $95^{\circ}C$에서는 감소하는 경향이었다. 홍삼 추출액의 총 당은 $95^{\circ}C$에서 추출시간을 길게 할수록 함량이 증가하였고, 당도는 $95^{\circ}C$에서 24시간 추출한 용액이 4.0%로 가장 높았다. 탁도는 $95^{\circ}C$에서 추출시간이 길수록 증가하였으며, pH 및 Hue 값은 추출시간이 길어질수록 낮아졌다. 따라서 홍삼추출액을 제조할 때 1차 추출에서는 온도를 낮게하여 사포닌의 함량을 높이고, 2차 추출에서는 온도를 높게하여 맛을 증진시켜 혼합하는 방법이 좋을 것으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.101-109
• /
• 2012

Wood composites are a hygroscopic material and have ability to exchange its moisture content with air. This study investigated the formaldehyde emission and moisture content change of four wood composites (particleboard (PB), medium density fiberboard (MDF), high density fiberboard (HDF), laminated HDF (L-HDF)) as a function of bake-out temperature and time. The composites were baked out for 1, 3, 5, 7, 10, 14, 21, and 28 days at temperatures of $20{\pm}2$, $35{\pm}2$, and $50{\pm}2^{\circ}C$ in a dry oven. The moisture content change was used to determine the emission bake-out of the composites. Best bake-out time results were obtained with after 7 days all composites. Formaldehyde emission values of composites decreased with decreasing moisture content for both temperatures. The formaldehyde emission results of bake-out temperature 35 and $50^{\circ}C$ showed a similar tendency.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.317-323
• /
• 1999

Si3N4-TiC composites have been known as electrically conductive ceramics. $Si_3N_4-TiC$ composites with 2 wt% $Al_2O_3$ and 4 wt% $Y_2O_3$ were hot pressed in $N_2$ environment. The mechanical properties including hardness, fracture toughness, and flexural strength and tribological properties were investigated as a function of TiC content. $Si_3N_4-40$ vol% TiC composite was hot pressed at $1,750^{\circ}C$, $1,800^{\circ}C$, and $1,850^{\circ}C$ for 1, 3 and 5 hours in $N_2$ gas. Mechanical and tribolgical properties depended on microstructures, which were controlled by hte TiC content, hot press temperature, and hot press holding time. However, mechanical properties and tribological behaviors were degraded by the chemical reaction between TiC and N. The chemically reacted products such as TiCN, SiC, and $SiO_2$ were detered by the X-ray diffraction analysis.

• Journal of Ginseng Research
• /
• 제8권2호
• /
• pp.124-134
• /
• 1984

Ginseng root starch, prepared by conventional method, contained crude lipid of 0.5%, crude protein of 0.4%, crude mineral of 0.17% and phosphorous of 12.5mg% as noncarbohydrate constituents. The amylose content of ginseng root starch picked in Summer (May to August) and Winter (November to March) was 32-35% and 15-20%, respectively, and it was decreased with a growing preiod of ginseng. The blue value, alkali number and ferricyanide number of the starch were 0.14-0.17, 8.50 and 0.781, respectively. The molecular weight of amylose in the starch was estimated to be 1.27-7.95${\times}$105 by means of periodate oxidation, and the degree of branching and glucose unit per segment of amylopectin were 3.50-3.53% and 28.3-28.5, respectively, The starch content of ginseng root was decreased when dried under sunlight and stored at 5$^{\circ}C$ for twenty days. In contrast, sucrose content in the root was increased from 3.8% in fresh state to 11.5% during storage at the above condition. In the other hand, starch was converted to maltose by heating at temperature above 70$^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.415-418
• /
• 2001

The I-V characteristics and its stability of ZPCCL-based ceramic varistors doped with La$_2$O$_3$in the range of 0.0~4.0 mol% were investigated. The density of ceramics was increased in the range of 4.7~5.8 g/cm$^3$ with increasing La$_2$O$_3$content. As La$_2$O$_3$content is increased, the varistor voltage was decreased in the range of 503.49-9.42 V/mm up to 2.0 mol%, whereas increasing La$_2$O$_3$content further caused it to increase. The ZPCCL-based varistors were characterized by nonlinearity, in which the nonlinear exponent is in the range of 3.05~82.43 and leakage current is in the range of 0.24-100.22 $\mu$A. Among ZPCCL-based varistors, 0.5 mol% added-varistors exhibited an excellent nonlinearity, in which the nonlinear exponent is 82.43 and the leakage current is 0.24 $\mu$A. Furthermore, they exhibited a high stability, in which the variation rate of the varistor voltage and the nonlinear exponent was -1.11% and -6.72%, respectively, under DC stress, such as (0.80 V$_{1mA}$9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$115$^{\circ}C$//12h) +(0.90 V$_{1mA}$12$0^{\circ}C$//12h)+(0.95 V$_{1mA}$1$25^{\circ}C$//12h)+(0.95 V$_{1mA}$15$0^{\circ}C$//12h). Consequently, it was estimated that ZPCCL-based ceramics will be applied to development of Pr$_{6}$O$_{11}$ based ZnO varistors having a high performance.e.rformance.e.

• 한국식품과학회지
• /
• 제43권3호
• /
• pp.315-320
• /
• 2011

Germ본 연구는 GABA 함량이 높은 발아보리 제조조건을 선정하고, 발아보리를 이용한 고추장 당화물의 품질특성을 분석하였다. 수침온도(5, 15 및 $25^{\circ}C$)에 관계없이 수침시간이 경과함에 따라 보리의 수분흡수율은 증가하고 수침용액의 pH는 감소하였으며, 25에서 수분흡수율(33.46-59.86%)과 pH의 변화(6.37-5.56)가 가장 크게 나타났다. 보리의 GABA 함량은 $25^{\circ}C$, 20시간 수침 시켰을때 11.90mg/100g으로 가장 높았다. 수침 후 발아조건(5, 15 및 $25^{\circ}C$, 0-72 h)별 보리의 GABA 함량에 있어서는 $5^{\circ}C$에서 36시간 발아시켰을 때 15.06 mg/100g으로 가장 높아 원맥보다 GABA 함량이 약 7.4배 증가하였다. 전분질원으로서 찹쌀, 보리 또는 발아 보리 첨가에 관계없이 모든 고추장 당화물의 pH는 당화기간 동안 감소하였고, 산도, 아미노태 질소 함량 및 암모니아태 질소 함량은 증가하였다. 고추장 당화물의 GABA 함량도 전분질원 종류에 관계없이 당화기간이 경과함에 따라 증가되었고, 발아보리 첨가 당화물의 GABA 함량이 11.89mg/100g으로 가장 높았다.

• 대한약침학회지
• /
• 제12권2호
• /
• pp.13-20
• /
• 2009

In this study, the effects of Ganoderma lucidum (GL) on fat metabolism were performed in 3T3-L1 adipocytes. The effects of GL on 3T3-L1 preadipocytes differentiation were also examined. Our results showed that GL decreased the TG content by ORO staining. To elucidate the mechanism of the effects of GL on lowering TG content in 3T3-L1 adipocytes, we examined whether GL modulate the expressions of transcription factors and adipokines related to control of energy expenditure process because adipokines regulate adipocyte mass and increased expenditure may consume much TG in adipocytes. As a result, the expression of C/$EBP{\beta}$, C/$EBP{\delta}$, C/$EBP{\alpha}$, and $PPAR{\gamma}$, genes, which induce the adipose differentiation and adipose-specific FAS, aP2, and adipsin genes, which compose fat formation were decreased. In addition, GL increased the expression of leptin, UCP2, adiponectin in 3T3-L1 adipocytes, resulting in energy homeostasis. In conclusion, GL could regulate transcript factor related to induction of adipose differentiation and control TG content by up-regulation of adipokines related to fat burn.

• 한국식품조리과학회지
• /
• 제14권4호
• /
• pp.313-326
• /
• 1998

The quality of physical characteristics were measured, using sensory evaluation and mechanical characteristics where different storing temperature and period on Gukhwa-Byung, which is made of different percentages of Gukhwa (0%, Gukhwa powder：1%, 3% and 5%, and Gukhwa flower：1%, 3% and 5%) were added to rice flour, to promote the use of and liking for rice cakes that are a kind of korean traditional foods. The sensory evaluation showed that it is generally fine right after being made. Especially group F3 was evaluated the best for color, feeling after-swallow and overall-quality. As for color alone, it fumed out to be most distinctive in group F3 after storing 24 hours at 4$^{\circ}C$, in group F1 after 24 hours at 10$^{\circ}C$, in group F1 and F3 after 24 hours at 30$^{\circ}C$ and in group F1 after 48 hours at 30$^{\circ}C$, Gukhwa-Byung added with Gukhwa flower takes the higher degree of preference than the one with Gukhwa powder. Moisture decreased and overall-quality deteriorated as the storing time passed. The value of lightness in the color of Gukhwa-Byung, reduced as Gukhwa content increased and storing temperature rose. The values of red color and yellow color increased as Gukhwa content increased. In a mechanical texture measurement, springiness was high in group P5 right after being made. And it was high after storing 72 hours at 4$^{\circ}C$ and after 96 hours at 10$^{\circ}C$, and there was a significant difference according to Gukhwa content (p＜.05). Springiness remained unchanged after storing, 24 hours at 30$^{\circ}C$. Cohesiveness was high in every group of P1, P3 and P5, in which Gukhwa powder was added, right after being made, but as temperature rose and time passed, it heightened in group F3, in which 3% of Gukhwa flower was added. In all the samples, hardness gradually increased as the storing time at each temperature passed, and decreased as Gukhwa content increased. Chewiness was getting high as the storing time passed and temperature lowered. Color in sensory evaluation and the value of lightness in mechanical measurement showed a positive correlation at storing temperature 4$^{\circ}C$ and 10$^{\circ}C$ (p<.01). Softness and the value of lightness showed a negative correlation (p<.05). In sensory evaluation, softness and moisture showed a negative correlation with the value of lightness when storing at 30$^{\circ}C$.