• Magazine of the Korea Concrete Institute
• /
• v.7 no.1
• /
• pp.89-96
• /
• 1995

본 연구는 시멘트 경화체 중의 Cl 고정화 메카니즘을 규명하는 연구의 일환으로 시멘트의 C3A 함유량에 따른 Cl 고정화 효과를 세공용액 분석방법에 의해 조사한 것으로 C3A함유량 0.46 9.65%의 4가지 시멘트와 C3A를 함유하지 않은 초속경 시멘트 페이스트를 밀봉용기내에서 양생시켜 재령 28일에 세공용액을 추출하여 세공용액 중의 Cl 과 OH 농도를 측정, C3A함유량이 Cl 고정화에 미치는 영향을 검토한 것이다. 연구결과 세공용액 중의 Cl 농도는 NaCl 혼입량에 관계없이 시멘트 중의 C3A량이 증가함에 따라 낮아져 시멘트 경화체 내에서 Cl 의 고정화에 C3A가 매우 효과적임을 알 수 있었다. 세공용액의 Cl /OH 는 Cl 혼입량이 시멘트 중량의 0.3%인 경우 강재부동태막을 파괴하는 0.3보다 낮았으며 X선회절분석에 의해 C3A에 의한 고정화 메카니즘은 프리델씨염(Friedel's salt)의 생성에 의함을 확인하였다.

• Journal of Food Hygiene and Safety
• /
• v.6 no.2
• /
• pp.83-87
• /
• 1991

Beef, pork and chicken on the market were analyzed for determination of tetracyclines residue and decomposition of tetracyclines by heating were studied. The content of oxytetracycline was trace in chicken A, 0.09 mg/kg in C and trace in beef C, pork A and B, but in the other samples was not detected oxytetracycline. Chlortetracycline residue was 0.14, 0.02 and 0.01 mg/kg in chicken A, C and beef B respectively. In HPLC analysis, two peaks of 8.1 and 9.0 min of retention time were found from beef and pork and expected to be component of meat, and because of same retention time, the one of 9.0 min interrupted determination of tetracycline. But those were not found in chicken, therefore the residue was 0.01 mg/kg in sample A. The residue were degradated rapidly by heating of roast, but slightly by that of boiling.

• Solar Energy
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1991

In this research, Octacosane($C_{28}H_{58}$) and Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) were selected as latent heat storage materials to store off-peak electricity or waste heat of an industrial plant. Experimental analyses were performed in terms of the variation of phase change temperature and latent heat, phase change stability for the long term utilization. The results were as follows. 1. The phase change temperatures of industrial grade Octacosane and Sodium Acetate Trihydrate were $60.7^{\circ}C$ and $57.4^{\circ}C$, the latent heat were 60.6kcal/kg and 51.1kcal/kg respectively. 2. The latent heat quantity of Octacosane was decreased with the increasing number of phase change cycles. It decreased from 60.6kcal/kg to 47.2kcal/kg upto 200 cycles and then no variation was observed after 200 cycles. 3. To prevent the supercooling of Sodium Acetate Trihydrate, the nucleating agent, Sodium Pyrophosphate Decahydrate of 3 wt% was added, and then the supercooling temperature (Tm-Tsc) was decreased from $25.7^{\circ}C$ to $1^{\circ}C$. The phase separation was disappeared by the addition of CMC-Na of 3 wt% as a thickener. It was found that the optimal quantity of nucleating agent and thickener was 4wt% considering the stability of SAT as a latent heat storage material. 4. The phase change temperature of Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$) was adjusted from 57.4 to $46.2^{\circ}C$ by the addition of UREA. And then the latent heat quantity was decreased from 51.1 to 38.3kcal/kg. 5. When the heat storage capacities between the sensible and latent heat storage materials were analyzed and compared in heating process from 30 to $90^{\circ}C$, the heat storage capacity of Octacosane was 2.45 times larger than water and 12.5 times than granite at $60.7^{\circ}C$, and the heat storage capacity of Sodium Acetate Trihydrate was 2.53 times larger than water and 12.91 times than granite at $57.4^{\circ}C$.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.517-521
• /
• 2003

This study was conducted to investigate the presevative effect of chitosan on soybean leaf kimchi. Three different kinds of chitosan, molecular weihts(M.W) of 2,000, 30,000 and 300,000, were used. Kimchi, prepared by adding chitosan in 0.5% solution or control, was examined for evaluation of pH, acidity, vitamin C and number of Lactic acid bacteria during fermentation at 10$^{\circ}C$ for 20 days. As a result, the pH decreased and acidity increased with increasing fermentation periods. Kimchi with chitosan of M.W 30,000 showed Bower pH, higher acidity, more consitutional vitamin C content, and lower number of tactic acid bacteria than any other treatment. This results suggest that chitosan of M.W 30,000 could be more effective material in presenation of soybean leaf kimchi.

• Communications for Statistical Applications and Methods
• /
• v.18 no.3
• /
• pp.377-389
• /
• 2011

A higher quality level is generally perceived by customers as improved performance by assigning a correspondingly higher satisfaction score. The third generation index $C_{pmk}$ is more powerful than two useful indices $C_p$ and $C_{pk}$ that have been widely used in six sigma industries to assess process performance. In actual manufacturing industries, process capability analysis often entails characterizing or assessing processes or products based on more than one engineering specification or quality characteristic. Since these characteristics are related, it is a risky undertaking to represent the variation of even a univariate characteristic by a single index. Therefore, the desirability of using vector-valued process capability index(PCI) arises quite naturally. In this paper, we consider more powerful vector-valued process capability index $C_{pmk}$ = ($C_{pmkx}$, $C_{pmky}$)$^t$ that consider the univariate process capability index $C_{pmk}$. First, we examine the process capability index $C_{pmk}$ and plug-in estimator $\hat{C}_{pmk}$. In addition, we derive its asymptotic distribution and variance-covariance matrix $V_{pmk}$ for the vector valued process capability index $C_{pmk}$. Under the assumption of bivariate normal distribution, we study asymptotic confidence regions of our vector-valued process capability index $C_{pmk}$ = ($C_{pmkx}$, $C_{pmky}$)$^t$.

• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.115-136
• /
• 2020

This study aims to analyze the impact of China's iron ore imports and exports on the tramper freight rate of China. The import volume of iron ore in China, the export volume of steel products in China, and exogenous variables were used as independent variables. The dependent variables were BDI, BCI, C5, C10, C14, BSI, S2, and S3. Correlation analysis and regression analysis were conducted. The correlation analysis showed that China's iron ore imports were not related to the remaining BDI, BCI, BSI, C5, C10, S2, and S3, except for the C14 index. However, there was a positive correlation between the ship's space and international oil prices, and it was not related to China's Purchasing Managers Index (PMI). The export volume of steel products was negatively correlated with BDI, BCI, BSI, C5, C10, C14, S2, S3, and international oil prices, and was not related to iron ore imports, ship space, and China's PMI. In the verification of the hypothesis between China's iron ore imports and exogenous variables, China's PMI was rejected within the hypothesis. However, the hypothesis on international oil prices and ship space was adopted. In the verification of the hypothesis between China's steel export volume and exogenous variables, the hypothesis on BDI and the S3 index was adopted, and the hypothesis on BSI and S2 was rejected. In the analysis results of this study, the ship space and oil prices were adopted in all the hypothesis results. Domestic companies participating in the tramper shipping market will need to be prepared through continuous monitoring of related indicators.

• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2003

Morphological characteristics, developmental period, and seasonal occurrence of Adeia leucomelas (L.) were investigated from 1999 to 2000. In addition, consumption of sweetpotato as food was also examined. Adults of A. leucomelas were dark-brown and body lengths of females and males were 20.2 mm and 18.9 mm, respectively, Wing expanse of female and male was 33.7 mm and 29.4mm, respectively. Egg was flat round-shape. Larva was light yellow-green to dark-brown with 3.3-53.5 mm. Pupa was deep-brown and 15.1 mm in length. Developmental periods of A. leucomelas from egg to adult emergence at different temperatures of 15, 20, 25, and 30$^{\circ}$C were 108.5, 70.7, 40.2, and 29.1 days, respectively, Developmental threshold (DT) and effective accumulative temperatures were estimated as 10.7$^{\circ}$C and 67.5 DD in egg stage, 11.0$^{\circ}$C and 275.1 DD in larval stage and 9.3$^{\circ}$C and 244.6 DD in pupal stage, respectively. The longevity of adult female was shortened with increment of temperature, whereas the total numbers of eggs laid by a female were increased. The larvae of A.leucomelas occurred from mid-June to early October, and population reached its peak during early to mid-September in Jeonbuk province. Food consumption of A. leucomelas was highest at 20-25$^{\circ}$C. Food consumption of 1 st, 2nd, 3rd, 4th, and 5th larvae of A. leucomelas per day at 25$^{\circ}$C was 0.4, 3.6, 19.6, 40.7, and 78.9 $\textrm{cm}^2$, respectively.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.693-698
• /
• 2012

In this study aluminum isopropyl oxide ($Al(O-i-Pr)_3$) was supported on the amine-functionalized surface of silica to synthesize high molecular weight (MW) polylactide (PLA), and it was tested for PLA polymerization behaviors. A silica was funtionalized with silane compound having amine groups, then in-situ treated with $Al(O-i-Pr)_3$. $Al(O-i-Pr)_3$ attached to amine group on silica showed activity only in the presence of MAO (methyl aluminoxane). At the polymerization temperature of $115^{\circ}C$, the conversion and the MW of PLA were increased as the amount of silane was increased. At the polymerization temperature of $130^{\circ}C$, the conversion was decreased while the MW was increased drastically and reached to MW 44000 g/mol when the amine concentration was 3.0 mmol/g. A bimodal type GPC curve was shown at the polymerization temperature of $115^{\circ}C$. As the amount of amine group increased, the peaks of GPC curve were merged. At the polymerization of $130^{\circ}C$, a unimodal GPC curve was shown. $Al(O-i-Pr)_3$ supported on amine-functionalized silica was able to produce higher MW PLA with enhanced activity compared to homogeneous $Al(O-i-Pr)_3$.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.475-488
• /
• 2018

This study evaluates geothermal system efficiency in terms of input power and heat exchange volume on the heat-source and load sides, by applying a combined open-closed type loop system comprising a geothermal system and a groundwater well to a cultivation site. In addition, this study analyzes the effects of heating and cooling for a complex geothermal system, by evaluating the temperatures of an external site and a cultivation site during operation. During cooling operations the heat exchange volume on the heat source side, average 90.0kW/h for an open type system with an input of 235L/minute groundwater, and 40.1kW/h for a closed type system with an input of 85L/minute circulating water, for a total average heat exchange volume of 130.1kW/h. The actual heat exchange volume delivered on the load side averages 110.4kW/h. The average EER by analysis of the geothermal system's cooling efficiency is 5.63. During heating operation analysis, the heat exchange volume on the heat source side, average 60.4kW/h in an open type system with an input of 266L/minute groundwater, and 22.4kW/h in closed type system with an input of 86L/minute circulating water, for a total average heat exchange volume of 82.9kW/h. The actual heat exchange volume delivered on the load side averages 112.0kW/h in our analysis. The average COP determined by analysis of the geothermal system's heating efficiency is 3.92. Aa a result of the tradeoff between the outside temperature and the inside temperature of the production facility and comparing the facility design with a combined well and open-closed loops geothermal(CWG) system, we determine that the 30RT-volume CWG system temperature are lower by $3.4^{\circ}C$, $6.8^{\circ}C$, $10.1^{\circ}C$ and $13.4^{\circ}C$ for ouside temperature is of $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$ and $35^{\circ}C$, respectively. Based on these results, a summer cooling effect of about $10^{\circ}C$ is expected relative to a facility without a CWG system as the outside temperature is generally ${\geq}30^{\circ}C$. Our results suggest that a complex geothermal system provides improvement under a variety of conditions even when heating conditions in winter are considered. Thus It is expected that the heating-cooling tradeoffs of complex geothermal system are improved by using water screen.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.78-93
• /
• 2003

To investigate seasonal variation and structure of the microbial community in Kyeonggi Bay, abundance and carbon biomass of nano-and micrzooplankton were evaluated in relation to size fractionated chlorophyll-a concentration, through the monthly interval sampling from December 1997 to November 1998. Communities of nano-and microzooplankton were classified into 4 groups such as heterotrophic nanoflagellate(HNF), ciliates, heterotrophic dinoflagellates(HDF) and zooplankton nauplii. Abundance and carbon biomass of HNF ranged from 380 to 4,370 cells ml-1(average 1,340$\pm$130 cells ml-1) and from 0.63 to 12.4 $\mu\textrm{g}$C 1-1(average 4.35$\pm$0.58 $\mu\textrm{g}$C 1-1), respectively. Abundance and carbon biomass of ciliates ranged from 331 to 44,571 cells ml-1(average 3,526$\pm$544 cells ml-1) and from 1.3 to 119.7 $\mu\textrm{g}$C 1-1(average 13.7$\pm$3.0 $\mu\textrm{g}$C 1-1), respectively. Abundance and carbon biomass of HDF ranged from 88 to 48,461 cells 1-1(average 9,034$\pm$2,347 cells 1-1) and from 0.05 to 54.05 $\mu\textrm{g}$C 1-1(average 6.9$\pm$2.4 $\mu\textrm{g}$C 1-1), respectively. Abundance and carbon biomass of zooplankton nauplii ranged from 5 to 546 indiv. 1-1(average 83$\pm$15 indiv. 1-1) and from 0.17 to 43.2 $\mu\textrm{g}$C 1-1(average 6.3$\pm$1.2 $\mu\textrm{g}$C 1-1), respectively. Eash component of microbial biomass was not different from tidal cycle except tintinnids group. Depth integrated nano-and microzooplankton biomass ranged from 124 to 1,635 mgC m-2(average 585$\pm$110 mgC m-2) and was highest in March and May. The relative contribution of each component to the nano-and microzooplankton showed difference according to seasons. Community structure of nano-and microzooplankton was dominated by planktonic ciliate group. During the study period, carbon biomass of nano-and microzooplankton was strongly positively correlated with size fractionated chlorophylla-a. It implied that prey-predator relationship between microzooplankton and phytoplankton was important in the pelagic ecosystem of Kyeonggi Bay.