• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.29-33
• /
• 2019

Carbon nanotubes, nanofibers and powders were used for acetylene adsorption experiments. A total of 15 different experiments were designed by 3-level of Box-Behnken Design (BBD) with 3 factors including the Pd concentration of 0 to 5%, adsorption temperature of 30 to $80^{\circ}C$ and $C_2H_2/CO_2$ of 3 to 10. Based on those data, a second order polynomial regression analysis was used to derive the adsorption amount prediction equation according to operating conditions. The adsorption temperature showed the greatest influence index while the $C_2H_2/CO_2$ ratio showed the smallest according to the F-value measurement of the ANOVA analysis. However, there was little interaction between major factors. In the adsorption optimization analysis, a 22.0 mmol/g was adsorbed under the conditions of Pd concentration of 3.0%, adsorption temperature of $47^{\circ}C$ and $C_2H_2/CO_2$ of 10 with 95.9% accuracy.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.13-18
• /
• 2003

The initial NiCuZn synthetic ferrite were acquired from thermally decomposing the metal nitrates Fe($NO_3$)$_3$ㆍ$9H_2$O, Zn($NO_3$)$_2$ㆍ$6H_2$O, Ni($NO_3$3)$_2$ㆍ $6H_2$O and Cu(NO$_3$)$_2$ㆍ $3H_2$O at 1$50^{\circ}C$ for 24 hours and was calcined at $500^{\circ}C$. Each of those was pulverized for 3 and 9 hours in a steel ball mill and was sintered between $700^{\circ}C$ and $1,000^{\circ}C$ for 1 hour, and then their microstructures and magnetic properties were examined. We could make the initial specimens chemically bonded in liquid at the temperature as low as $150 ^{\circ}C$, by using the melting points less than $ 200^{\circ}C$ of the metal nitrates instead of the mechanical ball milling, then narrowed a distance between the particles into a molecular level, and thus lowed sintering temperature by at least $200 ^{\circ}C$ to $300^{\circ}C$ Their initial permeability was 50 to 490 and their saturation magnetic induction density and coercive force 2,400G and 0.3 Oe to 1.2 Oe each, which were similar to those of NiCuZn ferrite synthesized in the conventional process.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.853-858
• /
• 1999

To investigate the effect of H2 flow rate and TMS[Si(CH3)4] concentration on synthesizing ultrafine ${\beta}$-SiC powder by vapor phase reaction the experiment was performed at 1100$^{\circ}C$ of the reaction temperature under the condition of 200-2000 cc/min of H2 gas flow rate and 1-10% of TMS concentration respectively. The shape of ${\beta}$-SiC particles synthesized was spherical and the size of particles decreased and the distribution of particles was more uniform with increasing H2 gas flow rate. In this case Si powders were coexisted with ${\beta}$-SiC Pure and ultrafine ${\beta}$-SiC powders without Si were obtained under the condition of above 2% of TMS concentration and below 1500 cc/min of H2 gas flow rate.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.4
• /
• pp.318-323
• /
• 1990

The bis(malonato)diaquochromate(III) ion, $Cr(C_3H_2O_4)_2^-$ in acidic solution hydrolyzes to give $Cr(C_3H_2O_4)^{+}.$ This reaction is catalyzed by ferric ion and the rate law for this cation catalyzed-aquation in a $HClO_4/NaClO_4$ medium, $I = 1.00 M, is-d[Cr(C_3H_2O_4)_2^-]/dt = ({\kappa}_1[Fe^{3+}] + {\kappa}_2[H^+])[Cr(C_3H_2O_4)_2^-]$ where ${\kappa}_1(25^{\circ}C) = 4.72×10^{-5} M^{-1}sec^{-1} ({\Delta}H^{\neq} = 22.5 Kcal/mol, {\Delta}S^{\neq} = - 2.58 eu) and {\kappa}_2(25^{\circ}C) = 4.75{\times}10^{-5} M^{-1}sec^{-1} ({\Delta}H^{\neq} = 21.2 Kcal/mol, {\Delta}S^{\neq} = - 7.13 eu).$ Rapid preequilibrium association of basic Cr-bound oxygen with $Fe^{3+},$ followed by rate-determining ring opening, is proposed to account for the ${\kappa}_1,$ hydrolysis pathway.

• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.339-345
• /
• 2007

Urea reacts with PtCl2, H2[PtCl6]·6H2O, H2[IrCl6] and Ni(CH3CO2)2 in aqueous solution at high temperature (60-80 °C) yielding [PtCl2(Urea)]·2H2O (1), (NH4)2[PtCl6] (2), (NH4)2[IrCl6]·H2O (3) and [Ni2(OH)2(NCO)2(H2O)2] (4) complexes, respectively. In complex 1, urea coordinates to Pt(II) as a neutral bidentate ligand via amido nitrogen atoms. In complexes 2, 3 and 4 it seems that the coordinated urea molecules decompose during the reaction at high temperature and a variety of reaction products are obtained. All complexes were isolated in moderate yields as dark green (1), yellow (2), pale brown (3) and faint green (4) precipitates, respectively. The reaction products were characterized by their microanalysis, IR, 1H and 13C NMR spectra as well as thermal analysis. General mechanisms describing the formation of these complexes were suggested.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.4
• /
• pp.31-35
• /
• 2014

The upper critical field ($H_{c2}$) was determined by applying a magnetic field along the ab plane and c axis for two single crystals of $BaFe_{2-x}Ru_xAs_2$ (x=0.48 and 0.75). The anisotropy of the $H_{c2}(0)$, ${\gamma}(0)=H_{c2}{^{ab}}(0)/H_{c2}{^c}(0)$, was ~1.6 for x=0.48 and ~2.3 for x=0.75. The angle-dependent resistance measured below $T_c$ allowed perfect scaling features based on anisotropic Ginzburg-Landau theory, leading to consistent anisotropy values. Because only one fitting parameter ${\gamma}$ is used in the scaling for each temperature, the validity of the ${\gamma}$ value was compared with that determined from ${\gamma}=H_{c2}{^{ab}}/H_{c2}{^c}$. The ${\gamma}$ obtained at a temperature close to $T_c$ was 3.0 and decreased to 2.0 at low temperatures. Comparing to the anisotropy determined for electron- or hole-doped $BaFe_2As_2$ using the same method, the present results point to consistent anisotropy in Ru-doped $BaFe_2As_2$ with other electron- or hole-doped $BaFe_2As_2$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.105-110
• /
• 2000

The $\alpha$-$Fa_{2}O_{3}/SnO_{2}$ thin film gas sensor was fabricated by APCVD and heat treated. The gas sensitivity to flammable gases ($CH_4$, $H_2$, LPG) was measured. This device was to heat treatment at $400^{\circ}C$, $450^{\circ}C$, $500^{\circ}C$, $550^{\circ}C$, $600^{\circ}C$ for 2 h to enhance the gas sensitivity. The heat treated device at $500^{\circ}C$ for 2 h had the best properties and especially it shows high sensitivity to H2 gas. The sensitivity to gases was studied in the temperature range from lOoC to $300^{\circ}C$ in order to find the optimum detection temperature. In the range of detection from 500 ppm to 10,000 ppm at $175^{\circ}C$ the fabricated device showed that the gas sensitivity to $H_2$ was from 62%~76% and to $CH_4$ was from 16 %~58% and to LPG was from 8%~37 %. The sensitivity difference between heat treated device and as fabricated one was about 10 8 The long-term stability to LPG at 1,000 ppm was converged to sensitivity of 30 %.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.4
• /
• pp.167-169
• /
• 1984

Analyses of $_1$H-NMR, infrared and electronic spectral data for $[Ir(CH_2 = CHCN)(CO)(P(C_6H_5)_3)_2]ClO_4 (1)$prepared by the reaction of $Ir(OClO_3)(CO)(P(C_6H_5)_3)_2$ with $CH_2 = CHCN$, agree with the suggestion that 1 is a mixture of the nitrogen-bonded acrylonitrile complex, $[(CO)(P(C_6H_5)_3)_2Ir-NCCH = CH_2]ClO_4$ and other compound which may be the C = C ${\Pi}$ -system-bonded acrylonitrile complex, "[(CO)(P(C6H5)3)2Ir-CHCN = CH2]ClO4.

• Korean Journal of Crystallography
• /
• v.8 no.2
• /
• pp.138-143
• /
• 1997

The crystal structure of isoimperatorin, f-[(3-methyl-2-butenyl)oxy]-7H-furo[3,2-g][1] benzopyran-7-one, has been determined from single crystal x-ray diffraction study; C16H14O4, Monoclinic, P21/c, a=8.865(1) Å, b=9.331(1) Å, c=16.156(1) Å, β=98.12(1)', V=1322.9(2) Å3, T=293(2)K, z=4, Cu Kα(λ=1.5418 Å). The structure was solved by direct method and refined by full-matrix least squares to a final R=5.72% for 1922 unique observed Fo>4o(F0) reflections and 182 parameters.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.382-388
• /
• 2000

Hydrogenated amorphous carbon (a-C:H) films were fabricated by electron cyclotron resonance plasma-enhanced chemical vapor deposition. The bonding structure of carbon and hydrogen in the a-C:H films has been investigated by varying the deposition conditions such as ECR power, gas composition of methane and hydrogen, deposition time, and negative DC self bias voltage. The bonding characteristics of the a-C:H thin film were analyzed using FTIR spectroscopy. The IR absorption peaks of the film were observed in the range of $2800\sim3000 \textrm{cm}^{-1}$. The atomic bonding structure of a-C:H film consisted of $sp^3$ and $sp^2$ bonding, most of which is composed of $sp^3$ bonding. The structure of the a-C:H films changed from $CH_3$ bonding to $CH_2$ or CH bonding as deposition time increased. We also found that the amount of dehydrogenation in a-C:H films was increased as the bias voltage increased.