• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.68-77
• /
• 2014

A compound has been isolated from the methanol extract of Styrax japonica bark using conventional chromatographic methods including silica gel chromatography, TLC and HPLC. The molecular formula of Styraxlignolide F analyzed by spectrometric analyses using FAB-MS, NMR was found to be $C_{27}H_{34}O_{11}Na$. The cytotoxicity of the styralignolide F was showed 15.2% in $1.0mg/m{\ell}$ on human kidney cell (HEK 293). As anticancer activity of $CH_2Cl_2$ fraction, over 60% of AGS and MCF-7 cells were inhibited in concentration of $1.0mg/m{\ell}$. In the results of anticancer test using quantification of Bcl-2, $CH_2Cl_2$ fraction showed lower Bcl-2 and p53 expression than those of styraxlignolide F and other fractions. In apoptosis of human lung carcunoma cancer cell (A549), $CH_2Cl_2$ fraction showed the highest inhibition rate (46.9%) and styralignolide F was the next (43.5%). The $CH_2Cl_2$ fraction showed higher anti-cancer activities than isolated substance (styraxlignolide F), probably due to the crude extract showing synergic effects by other components.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.213-216
• /
• 2001

Etching behaviors of ferroelectric YMn $O_3$ thin films were studied by an inductively coupled plasma (ICP). Etch characteristic on ferroelectric YMn $O_3$ thin film have been investigated in terms of etch rate, selectivity and etch profile. The maximum etch rate of YMn $O_3$ thin film is 300 $\AA$/min at Ar/C $l_2$ of 2/8, RF power of 800W, dc bias voltage of 200V, chamber pressure of 15mTorr and substrate temperature of 3$0^{\circ}C$. Addition of C $F_4$ gas decrease the etch rate of YMn $O_3$ thin film. From the results of XPS analysis, Y $F_{X}$ compunds were found on the surface of YMn $O_3$ thin film which is etched in Ar/C1/C $F_4$ plasma. The etch profile of YMn $O_3$ film is improved by addition of C $F_4$ gas into the Ar/C $l_2$ plasma. These results suggest that fluoride yttrium acts as a sidewall passivants which reduce the sticking coefficient of chlorine on YMn $O_3$.>.

• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.99-103
• /
• 2004

The structure of $C_{16}H_{19}O_2N_3CuCl_2\;{\cdot}\;H_2O$ has been determined by X-ray diffraction methods. The crystal system is triclinic, space group Pl, unit cell constants. $a=7.6202(9)\; \AA,\; b=8.5943(7) \AA,\; c= 8.6272(6) \AA,\; \alpha= 67.518(6)^{\circ}.\; \beta= 68.043(8)^{\circ},\; \gamma=74.370(8)^{\circ},\; V=478.89(8)\; \AA^3,\; T=295K,\; Z=1,\; D_c=1.504Mgm^{-3}$The intensity data were collected on an Enraf-Nonius CAD-4 Diffractometer with graphite monochromated $MoK\alpha$ radiation $(\alpha=0.7107\;\AA)$. The molecular structure was solved by direct method.』 and refined by full-matrix least squares to a final $R=2.47\%$ for 1659 unique observed $F_0>4\sigma(F_0)$ reflections and 234 parameters.

• Korean Journal of Microbiology
• /
• v.40 no.1
• /
• pp.43-48
• /
• 2004

Bacillus megaterium F7-1 producing keratinolytic protease was isolated from decayed chicken feather. The optimal culture conditions for the production of keratinolytic protease by B. megaterium F7-1 were investigated. The composition of optimal medium for the keratinolytic protease was 0.2% glucose, 0.8% skim milk, 0.05% NaCl, 0.01 % $(K_2HPO_4$, 0.02%, $(KH_2PO_4$ and 0.01 % $MgCl_2$. Especially, skim milk was found to be the most effective compound in keratinolytic protease production. The optimal temperature and initial pH were 6.5 and $25^{\circ}C$, respectively. The keratinolytic protease production under optimal condition reached a maximum of 269 U/ml after 5 days of cultivation. B. megaterium F7-1 degraded 98% of the feather used in the optimized medium within 6 days.

• Journal of the Korean Chemical Society
• /
• v.48 no.4
• /
• pp.339-350
• /
• 2004

The simplified cumulant method was applied to diffraction data of $CClF_3$ to study the equilibrium molecular parameters over a range of temperatures. The molecular parameters of $CClF_3$ by the simplified cumulant method were compared with those from the traditional method. Also the instrumentation of picosecond time resolved electron diffraction (TRED) and the experimental details are described. The total experimental temporal resolution was discussed in terms of the electron pulse width. The TRED system was applied to study the molecular structures for $CClF_3$ at room temperature. The molecular structural parameters $CClF_3$ from TRED are compared with those from GED/RT. The molecular parameters ($r_e$)of bonded C-F and C-Cl for $CClF_3$ by simplified CA are 132.00(2) pm and 175.20(3) pm, respectively, by using GED/RT. From the results of TRED experiments $r_a$ for bonded C-F and C-Cl are 132.23(13) pm and 177.23(19) pm.

• Journal of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.94-99
• /
• 1967

The interactions of iodobenzene with iodine, iodine monobromide, iodine monochloride and chlorine in carbon tetrachloride solution have been investigated by means of ultraviolet spectrophotometric measurements. The results reveal the formation of one to one molecular complexes, $C_6H_5I{\cdot}I_2$, $C_6H_5I{\cdot}IBr$, $C_6H_5I{\cdot}ICl$, and $C_6H_5I{\cdot}Cl_2$, in solution. The equilibrium constants obtained at room temperature (about $21^{\circ}C$) for the formation of these four complexes are 0.23, 0.73, 1.2 and 0.070 l $mole^{-1}$, respectively. Comparison of these results with those reported in the literature on other complexes of similar type indicates that the relative stabilities of these complexes decrease in the following orders: ICl>IBr>$I_2$>$Br_2$>$Cl_2$ $C_6H_5I$>$C_6H_6$>$C_6H_5Br$>$C_6H_5Cl$>$C_6H_5F$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.26-29
• /
• 2001

SrBi$_2$Ta$_2$$O_{9}$ thin films were etched at high-density C1$_2$/CF$_{4}$/Ar in inductively coupled plasma system. The etching of SBT thin films in C1$_2$/CF$_{4}$/Ar were chemically assisted reactive ion etching. The maximum etch rate was 1300 $\AA$/min at 900W in Cl$_2$(20)/CF$_4$(20)/Ar(80). As f power increase, radicals (F, Cl) and ion(Ar) increase. The influence of plasma induced damage during etching process was investigated in terms of the surface morphology and th phase of X-ray diffraction. The chemical residue was investigated with secondary ion mass spectrometry.y.

• Journal of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.189-196
• /
• 1963

Reactions between potassium fluoride with organic halogen-containing carboxylic acids in dimethyl formamide solvent gave a decarboxylation reaction for the case of fluoro carboxylic acids of the type of $CF_3\;COOH,\;C_3F_7COOH,\;and\;C_2F_5COOH,$ whereas an additional partial fluorination together with dimerization reaction occurred for the chlorine containing acids of the type of $CH_2ClCOOH,\;CH_3CHClCOOH, \;CHCl_2COOH\;and\;o-Cl-C_6H_4-COOH.$ The phenyl halides showed no reactivity, but the halides with two electron attracting substituents on the benzene ring gave mainly dimerization reaction. The esters and alcohols gave an usual fluorination reaction. The same reactions in absence of the solvent at the elevated temperature increase the yield of the dimerized product and gave the cyclized product, fluorenone, in case of ο-chlorobenzoic acid. It was found that the fluorination usually precede the decarboxylation reaction by checking the stiochemical sequence of reaction. Catalytic influence of potassium fluoride were discussed and the mechanism of the reaction was considered.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.240-251
• /
• 2017

1,1,1,2-Tetrafluoroethane (HFC-134a), which is used as refrigerant in air conditioners, has been recently regulated as a greenhouse gas and is recommended for reuse by refining. It is very important to quantitatively analyze trace impurities present in the refrigerant to evaluate the criteria for reuse. In this study, trace impurities including C, H, Cl, and F, which are difficult to quantify because there are no reference materials, were quantitatively analyzed by a gas chromatograph-atomic emission detector (GC/AED); for this analysis, this was preceded by a qualitative analysis with a GC-mass selective detector (GC/MSD). In addition, the AED response was investigated using a hydrocarbon mixed reference material, which was proportional to the number of atoms in the component. Fifteen refrigerant components were detected as trace impurities in HFC-134a by qualitative analysis of trace impurities including C, H, Cl, and F in the samples. Based on the results of the qualitative analysis, quantitative analysis of trace impurities using AED showed that the highest mole fractions were for the $CHClF_2$ component ($45438.38{\mu}mol/mol$) in one sample and for the $C_2H_2ClF_3$ component ($1311.47{\mu}mol/mol$) in another sample. From this study, it has been shown that it is possible for this analytical method to be applied to the qualitative and quantitative analysis of trace compounds in refrigerants, which are difficult to quantify because of the absence of reference materials.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.41-48
• /
• 1998

The catalytic oxidations of several cycloolefins in $CH_2Cl_2$ were been investigated using Mn(III)-, Fe(III)-porphyrin complexes as a catalyst and sodium hypochlorite as a terminal oxidant. Porphyrins were $(p-CH_3O)TTP,\;(p-CH_3)TTP,$ TPP, (p-F)TPP, (p-Cl)TPP and $(F_{20})TPP$ (TPP = tetraphenylporphyrin), and olefins were cyclopentene, cyclohexene and cycloheptene. The substrate conversion yield was discussed according to the substituent effects of metalloporphyrin. The conversion yield of substrate by changing the substituent of TPP increased in the order of $p-CH_3O$ < $p-CH_3$ < H < p-F < p-Cl, which was consistent with the sequence of $4{\sigma}$ values of TPP. The conversion of cycloalkene followed the order of $C_5\;<\;C_6\;<\;C_7$.