• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.173-178
• /
• 2000

A new open-chain ligand containing two phenol groups, 1, 14-Bis (2-hydroxybenzyl)-2, 6, 9, 12-tetraazatetradecane(bsated) was synthesized as its tetrahydrochloride salt and characterized by elemental analysis, mass, infrared and NMR. Its proton dissociation constants ($logK^n{_H}$) and stability constants ($logK_{ML}$) toward $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$ and $Zn^{2+}$ were determined at $25^{\circ}C$ and 0.10M($KNO_3$) ionic strength in aqueous solution by potentiometry. The X-ray structure of its copper (II) complex [Cu(bsated)]$(ClO_4)_2$ was reported: Monoclinic space group $P2_1/n$, $a=17.856(4){\AA}$, $b=17.709(1){\AA}$, $c=8.539(2){\AA}$, $V=2700(2){\AA}$ with Z=4. Electrochemical studies of [Cu(bsated)]$(ClO_4)_2$ complex in dimethyl sulfoxide (DMSO) solution containing tetrabutylammonium perchlorate (supporting electrolyte) were carried out by cyclic voltammograms (CV) and normal pulse voltammetry (NPV).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.207-212
• /
• 2009

In this study, a thermal behavior of $PrCl_3$ as one of the lanthanide chlorides in LiCl-KCl molten salts was investigated in an oxidizing condition. First, a thermo-gravimetric analysis (TGA) of $PrCl_3$ was carried out by an injection of $O_2$ gas. Based on the results, an oxidation of $PrCl_3$ in the molten salts was performed by sparging $O_2$ gas with changing temperatures. According to the TGA data of $PrCl_3$, a dissociation of $PrCl_3$ occurred rapidly by about $380^{\circ}C$ and a conversion of $PrCl_3$ to $PrCl_3$ was completed at about $600^{\circ}C$. The thermal behavior of $PrCl_3$ in LiCl-KCl molten salts by sparging $O_2$ gas was similar to that of $PrCl_3$ in the TGA test, and PrOCl as a insoluble compound in the molten salts was precipitated into the bottom of the molten salts. A conversion of $PrCl_3$ to PrOCl in the molten salts occurred actively at a higher temperature than $650^{\circ}C$. And it would be possible to estimate a conversion status of $PrCl_3$ to PrOCl by measuring a $Cl_2$ concentration in a flue gas generated from an oxidation test of $PrCl_3$ in LiCl-KCl molten salts.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.5-10
• /
• 2006

In a conventional and lean operating engine, the state of mixture is very important in the combustion and emission characteristics. Lean operation is known to decrease the formation while maintaining a good fuel economy, but the unstable operation due to misfire and erratic combustion prevents engines from being operated at very lean mixtures, so both combustion rates and exhaust emission formation need to be satisfied comparably. In this study, it is designed and experimented the modified engine, and analyzed the combustion and exhaust emission according to the change of engine speed and with adding ozone. The conclusions were drawn out and enumerated as follows. 1. At the experimental result of automobile diesel engine, it has been verified that the formation of particulate matter(PM) gas is able to be lower with the addition of optimum quantities of ozone. 2. Carbon monoxide(CO) was formed by the lack of oxygen and the thermal dissociation in the combustion process. Therefore, with the change of swirl valve's position and addition of oxygen and ozone, CO formation was decreased by the increasing of excessive O2, but it was increased by the temperature of combustion gas growing higher. As a result of the two effects, CO formation was decreased in this study. 3. Hydrocarbon(HC) was formed by the lack of O2, and the flow of mixture in cylinder. According to opening of the swirl valve and adding the oxygen and ozone, hydrocarbon gas was decreased by 20%, 9%, and 27.5%, respectively. 4. Nitric oxides($NO_x$) was strongly affected by the combustion gas temperature. As a result of respectively experimental conditions, $NO_x$ formation was increased about 20% due to (be the) high(er) combustion gas temperature.

• Clinical and Experimental Reproductive Medicine
• /
• v.13 no.2
• /
• pp.187-193
• /
• 1986

The purpose of this study was to establish optimal conditions for progesterone receptor assay using rat uterus, therby applying this system to understand action mechanism of progesterone in female reproductive organ and to evaluate physiological and pathological conditions in female reproduction. The results obtained were as follows 1. $^3H-R5020$ seemed to be more stable than 3H-progesterone as a ligand. 2. Optimal incubation time for ligand and receptor binding was 4-5 hrs at $4^{\circ}C$. 3. For the separation of bond and free ligand, optimal charcoal incubation time was 20 mins. 4. 2-3 mg cytosolic protein/ml was optimal for the binding of ligand. 5. Endogenous progesterone did not influence binding of ligand and receptor unless endogenous progesterone levels were extremely high as in case of pregnancy. 6. Dissociation rate for progesterone receptor was 1.22 nM. 7. $^3H-R5020$ did not bind to corticoid binding globulin (CBG), suggesting that addition of cortisol is saturate CBG was, not necessary as far as $^3H-R5020$ was used as a radioligand. It is, therefore, considered that this assay system established with these conditions might be used for the research as well as clinical routine purposes.

• Reproductive and Developmental Biology
• /
• v.36 no.1
• /
• pp.65-70
• /
• 2012

For reconstituting genetic resource(Korean Native Chicken: KNC) with grem-line chimeric chicken made with cryopreserved biastdermal cells, the experiments were carried out to optimize cryopreservating conditions. Stage X biastdemal cells were collected from KNC embryos and dissociated. Cells were susupended in medium containing cyopretectant and fetal bovine serum(FBS), and distributed into plastic ampules. Cell susupensions were seeded to induce ice formation at $-7^{\circ}C$ to $-35^{\circ}C$ at in the experiments, the effect of modification of dissociation way, concentration of FBS and cell density on the vaibility of frezen-thawed cells were investigated by trypan blue exclusion. Then change the way of cell dissociation from pipetting to short time vortexing, viability of frozen-thawed cell tended to be increaced from 29 % to 52 %. Increase concentraition of FBS in frozen medium from 20 % to 80 % made viability of thawed cell from 28 % to 35 %. The viability of thawed cells were 33.9% frozen at 2 embryos/0.5 ml, and 43.6 % frozen at 20 embryos/0.5 ml. Furthermore, combination of three modifications make big improvement. The viability of frozen-thawed cell was 60 % for combinated method, and 41 % for general method. This result means the advance to practical cryoreservation of blastdermal cell of the KNC(Ogolgye breed).

• Archives of Pharmacal Research
• /
• v.27 no.8
• /
• pp.873-877
• /
• 2004

This study was designed to determine the optimum conditions of three different factors (mixing time, mixing temperature, and tube size) in reduction of cholesterol in milk using immobilized $\beta$-CD beads. Immobilized $\beta$-CD glass beads were prepared at different conditions of silaniza-tion and $\beta$-CD immobilization reactions. In result, the glass beads (diameter 1 mm) at 20 mM 3-isocyanatopropyltriethoxysilane and 30 mM $\beta$-CD without base showed the highest choles-terol removal rate as 41%. Using above immobilized $\beta$-CD glass beads, the cholesterol removal rate was 40.2% with 6 h of mixing time in 7 mm diameter tube at $10^{\circ}C$. After choles-terol removal from milk, the glass beads were washed for cholesterol dissociation and reused. In recycling study, the cholesterol removal rate was 41%, which was mostly same as that using new glass beads. These results indicated that cholesterol removal rate was about 40% with $\beta$-CD immobilized glass beads, however, the recycling efficiency was almost 100%.

• Archives of Pharmacal Research
• /
• v.27 no.11
• /
• pp.1183-1187
• /
• 2004

This study was designed to develop crosslinking of $\beta$-cyclodextrin ($\beta$-CD), and determine the optimum conditions of different factors (mixing time, mixing temperature, and mixing speed) on cholesterol reduction from milk. Crosslinked $\beta$-CD was prepared with epichlorohydrin. When milk was treated with different conditions, the cholesterol removal rate was in the range of 79.4 to 83.3% with 1 % crosslinked $\beta$-CD addition, which were not significantly different among treatments. After cholesterol removal from milk, the used crosslinked $\beta$-CD was washed for cholesterol dissociation and reused. For recycling study, the cholesterol removal rate in first trial was 81.8%, which was mostly same as that using new crosslinked $\beta$-CD. With five trials repeatedly using the same sample, the mean cholesterol removal rate was 81.2%. The present study indicated that the optimum conditions on cholesterol removal using crosslinked $\beta$-CD were 10 min mixing with 400 rpm speed at $5^{\circ}C$ with about 80% cholesterol removal. In addition, crosslinked $\beta$-CD resulted in the effective recycling efficiency almost 100%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.3
• /
• pp.367-375
• /
• 1998

The physicochemical properties of the $\alpha$-amylase inhibitors from black bean and naked barley is Korea were investigated. Preincubation time for maximum inhibition was 30min and no activity change was seen after that time. Optimum pH of the $\alpha$-amylase inhibitors from the black bean and naked barley was pH 7.0 and the inhibitory activities were stable in the range of pH 6.0~8.0 in both phosphate and Tris-HCI buffer solutions. Both inhibitors maintained more than 50% of activity after incubation for 17 min at 7$0^{\circ}C$. The inhibitors from the black bean and naked barley maintained more than 50% of activities after treatment for 40 min and 30 min with pepsin, and 30 min and 50 min with trypsin, respectively. Both inhibitors functioned via a noncompetitive mechanism and were active against porcine pancreatic and human salivary $\alpha$-amylases. The activities of both inhibitors were linear for the ionic stength ranging from 0 to 0.9. The addition of 70 mM maltose to the reaction mixture caused a maximum increase in the relative activities of both inhibitors, but it did not affect the dissociation of the EI complex. The activities of both inhibitors were significantly enhanced by adding 1mM of K+ or Mg2+.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.119-119
• /
• 1999

GaN-based 물질들은 blue와 UV 영역의 LED, LD와 같은 광소자가 상용화되었을 뿐만아니라 HBT, FET와 같은 전기소자로도 널리 응용될 시점이지만 아직까지 해결되지 않은 문제점들이 있다. 그 중에 하나가 바로 GaN의 격자상수와 일치하는 기판이 없어 발생하는 dislocation인데, 이를 해결하기 위한 방법으로 새로운 기판이나, buffer, 또는 새로운 성장방법(ELOG) 등을 시도하고 있으나 dislocation density는 아직 높은 (107~1010cm-2) 상태이다. 이에 본 연구에서는 dislocation을 줄이기 위한 방책으로 InxGa1-xN를 새로운 buffer층으로 사용하여 GaN 박막을 MBE 방법으로 성장하였다. InxGa1-xN를 선택한 이유는 GaN와의 격자상수차이가 In0.12Ga0.88N일 경우 거의 일치한다는 보고가 있으며, 특히 InGaN의 melting point는 GaN의 성장온도 보다는 약간 높기 때문에 GaN 박막을 성장할 때와 식힐 때의 InGaN 원자결합은 약하게 작용되며, 결국 이는 열적인 stress를 줄여주게 된다. 이와 같이 성장된 GaN 박막은 그 결정성을 XRD로 분석하였고, 표면과 계면을 SEM으로 관찰하였다. 그리고 그 광학적 특성을 저온 PL로서 조사하였다. 그 결과를 살펴보면 35$^{\circ}$ 근방에서 GaN(0002) peak가 나온 것으로 보아 wurtzite 구조가 성장됨을 XRD로부터 확인하였다. 그리고 저온 (12K) PL에서는 3.470eV의 D$^{\circ}$X peak뿐만 아니라 3.258eV에 해당하는 peak를 얻었는데, 이는 InxGa1-xN buffer layer의 vapour pressure가 높은 (<50$0^{\circ}C$)에 도달하게 됨으로써 dissociation이 일어나면서 초기 성장이 이루어졌고 이는 다시 계면에서의 inter-diffusion을 발생시킨 것으로 보여진다.

• Korean Journal of Materials Research
• /
• v.17 no.9
• /
• pp.463-468
• /
• 2007

The interdiffusion characteristics of Cu-plug/Capping Layer/NiSi contacts were investigated. Capping layers were deposited on Ni/Si to form thermally-stable NiSi and then were utilized as diffusion barriers between Cu/NiSi contacts. Four different capping layers such as Ti, Ta, TiN, and TaN with varying thickness from 20 to 100 nm were employed. When Cu/NiSi contacts without barrier layers were furnace-annealed at $400^{\circ}C$ for 40 min., Cu diffused to the NiSi layer and formed $Cu_3Si$, and thus the NiSi layer was dissociated. But for Cu/Capping Layers/NiSi, the Cu diffusion was completely suppressed for all cases. But Ni was found to diffuse into the Cu layer to form the Cu-Ni(30at.%) solid solution, regardless of material and thickness of capping layers. The source of Ni was attributed to the unreacted Ni after the silicidation heat-treatment, and the excess Ni generated by the transformation of $Ni_2Si$ to NiSi during long furnace-annealing.