• Journal of the Chungcheong Mathematical Society
• /
• v.31 no.2
• /
• pp.239-246
• /
• 2018

In this paper, we define a concept of weak co-T-cofibration which is a generalization of weak H'-cofibration, and study some properties of weak co-T-cofibration and relations between the weak co-T-cofibration and the homology decomposition for a cofibration.

• Environmental and Resource Economics Review
• /
• v.15 no.1
• /
• pp.27-50
• /
• 2006

We estimate $CO_2$ emissions in Korea industry, 1990 and 2000 using a commodity- by-industry IO model ($CO_2$ hybrid IO mode]). Estimated $CO_2$ emissions in industries include both $CO_2$ emissions from direct and indirect consumption. The results show that total $CO_2$ emissions has increased by 51.6 million TC (Tonne of Carbon) from 64.4 million TC in 1990 to 115.5 million TC in 2000. By applying the structural decomposition analysis technique, we decompose change of $CO_2$ emissions in Korea industry between the period 1990~2000. In the decomposition, we figure out two contributing factors, changes in $CO_2$ coefficient and changes in final demand. The latter is further decomposed as growth effects and structural effects. We also estimated each factor's contribution to the changes in $CO_2$ emissions in industries between 1990~2000. The analysis can be used as a useful resource for policy makers in improving the effectiveness of $CO_2$ emissions mitigation policy.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.135-140
• /
• 2015

Decomposition of carbon dioxide is studied using $Ar/CO_2$ mixture inductively coupled plasmas (ICP). Argon gas was added to generate plasma which has high electron density. To measure decomposition rate of $CO_2$, optical emission actinometry is used. Changing input power, pressure and mixture ratio, the plasma parameters and the spectrum intensity were measured using single Langmuir probe and spectroscope. The source characteristic of Carbon dioxide ICP observed from the obtained plasma parameters. The decomposition rate is evolved depending on the reaction and discharge mode. This result is analyzed with both the measurement of the plasma parameters and the dissociation mechanism of $CO_2$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.1
• /
• pp.21-28
• /
• 2011

Fe, Ni and Co, typical active components, were dispersed on $Al_2O_3$ and $TiO_2$ for $SO_3$ decomposition. $SO_3$ decomposition was conducted at the temperature ranges from $750^{\circ}C$ to $950^{\circ}C$ using the prepared catalysts. Alumina based catalysts showed the surface areas higher than Titania based catalysts, which resulted from spinel structure formation of alumina based catalysts. Catalytic $SO_3$ decomposition reaction rates were in the order of Fe>Co${\gg}$Ni. The metal sulfate decomposition temperature were in the order of Ni>Co>Fe from TGA/DTA analysis of metal sulfate. During $SO_3$ decomposition, metal sulfate can form on the catalysts. $SO_2$ and $O_2$ can be produced from the decomposition of metal sulfate. In that point of view, the less is the metal sulfate deomposition temperature, the higher can be the $SO_3$ decomposition activity of the metal component. Therefore, it can be concluded that metal component with the low metal sulfate decomposition temperature is the pre-requisite condition of the catalysts for $SO_3$ decomposition reaction.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.657-662
• /
• 2002

The reduced ferrites, reduced NiF $e_2$ $O_4$ and CuF $e_2$ $O_4$, by C $H_4$ were applied to $CO_2$ decomposition to avoid the greenhouse effects. At the reduction reaction above $700^{\circ}C$, $H_2$ and CO were generated by partial oxidation of C $H_4$ After the reduction reaction up to 80$0^{\circ}C$, the spinel structure ferrites changed to mixture of the oxygen deficient iron oxide (Fe $O_{(1-{\delta})}$(0$\leq$$\delta$$\leq$1)) and the metallic Ni or Cu. The rate and quantity of $CO_2$ decomposition with reduced CuF $e_2$ $O_4$ were larger than those with reduced NiFe $O_4$. The $CO_2$ gas was decomposed by oxidation of the oxygen deficient iron oxide. The metallic Cu and Ni were not oxidized and remained in a metallic state up to 80$0^{\circ}C$. The $CO_2$ decomposition reaction with the reduced ferrite by C $H_4$ gas is excellent process preparing useful gas such as $H_2$and CO and decomposing $CO_2$ gas.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.746-751
• /
• 2002

Fluidized bed combustion is a coal combustion technology that can reduce both SOx and NOx emission; SOx is removed by limestone that is fed into the combustion chamber and the NOx is reduced by low temperature combustion in a fluidized bed combustor and air stepping, but $N_2O$ generation is quite high. $N_2O$ is not only a greenhouse gas but also an agent of ozone destruction in the stratosphere. The calcium oxide(CaO) is known to be a catalyst of $N_2O$ decomposition. This study of $N_2O$ decomposition reaction in fixed bed reactor packed over CaO bed has been conducted. Effects of parameters such as concentration of inlet $N_2O$ gas, reaction temperature, CaO bed height and effect of $CO_2$, NO, $O_2$ gas on the decomposition reaction have been investigated. As a result of the experiment, it has been shown that $N_2O$ decomposition reaction increased with the increasing fixed bed temperature. While conversion of the reaction was decreased with increasing $CO_2$ concentration. Also, under the present of NO, the conversion of $N_2O$ decomposition is decreased. From the result of kinetic study gained the heterogeneous reaction rate on $N_2O$ decomposition. In the case of $N_2O$ decomposition over CaO, heterogeneous reaction rate is. $\frac{d[N_2O]}{dt}=\frac{3.86{\times}10^9{\exp}(-15841/R)K_{N_2O}[N_2O]}{(1+K_{N_2O}[N_2O]+K_{CO_2}[CO_2])}$. In this study, it is found that the calcium oxide is a good catalyst of $N_2O$ decomposition.

• Journal of Magnetics
• /
• v.19 no.1
• /
• pp.5-9
• /
• 2014

The amine functionalized $CoFe_2O_4$ nanoparticles were prepared by thermal decomposition method at reflux temperatures $160^{\circ}C$ and $172^{\circ}C$. The obtained $CoFe_2O_4$ nanoparticles at $160^{\circ}C$ reflux temperature show aggregation free poly-dispersed nanoparticles in 4-15 nm range. In an elevated reflux temperature of $172^{\circ}C$, $CoFe_2O_4$ show aggregated poly-dispersed nanoparticles in the size range of 20-46 nm. The saturation magnetization value at 300 K exhibited 51 emu/g at reflux temperature of $160^{\circ}C$. However, the sample synthesized at an elevated temperature of $172^{\circ}C$ has shown a coercive field value of 560 Oe with saturation magnetization of 68 emu/g.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.375-378
• /
• 2008

This paper aims at identifying the factors that have influenced changes in the level of industrial $CO_2$ emissions. By means of complete decomposition method the observed changes are analyzed into five different factors: output level, energy intensity, energy mix and structural change and utility use. The application study refers to the manufacturing sectors in Korea. Moreover, this paper discusses the relationship between Korea's manufacturing $CO_2$ emission and economic growth (as measured by GDP), investigating whether economic growth is decoupling from $CO_2$ emission.

• Journal of Korean Society of Forest Science
• /
• v.98 no.2
• /
• pp.183-188
• /
• 2009

It is necessary to determine the amount of carbon dioxide ($CO_2$) absorbed by plants and released from forest floor into atmosphere, to gain a better understanding how forests participate in the global carbon cycle. Soil $CO_2$ efflux, litter production, and decomposition were investigated in Q. variabilis and P. densiflora stands in the vicinity of Gwangju, Chonnam province. Soil $CO_2$ efflux was measured using Infrared Gas Analyzer (IRGA) at midday of the 10th day at every month over 12-month period, to quantify seasonal and annual budgets of soil $CO_2$ efflux. Soil temperature and soil moisture were measured at the same time. Seasonal soil $CO_2$ efflux in Q. variabilis and P. densiflora were the highest in summer season. In August, maximum soil $CO_2$ efflux in Q. variabilis and P. densiflora was 7.49, $4.61CO_2{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. Annual $CO_2$ efflux in each stand was 1.77, $1.67CO_2kg{\cdot}m^{-2}$ respectively. Soil $CO_2$ efflux increased exponentially with soil temperature and related strongly in Q. variabilis ($r^2$=0.96), and in P. densiflora ($r^2$=0.91). Litter production continued throughout the year, but showed a peak on November and December. Annual litter production in the Q. variabilis and P. densiflora stands were $613.7gdw{\cdot}m^{-2}{\cdot}yr^{-1}$ and $550.5gdw{\cdot}m^{-2}{\cdot}yr^{-1}$.$yr^{-1}$, respectively. After 1 year, % remaining mass of Q. variabilis and P. densiflora litter was 48.2, 57.1%, respectively. The soil $CO_2$ efflux rates in this study showed clear seasonal variations. In addition, the temporal variation in the $CO_2$ efflux rates was closely related to the soil temperature fluctuation rather than to variations in the soil moisture content. The range of fluctuation of soil $CO_2$ efflux and litter decomposition rate showed similar seasonal changes. The range of fluctuation of soil $CO_2$ efflux and litter decomposition rate was higher during summer and autumn than spring and winter.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.801-806
• /
• 2002

The decomposition and/or conversion of carbon dioxide to carbon have been studied using oxygen-deficient ferrites for the reduction of $CO_2$ emission to the atmosphere. In this work, the homogeneous precipitation method using urea decomposition was employed to induce in situ precipitation of Ni ferrite($Ni_{0.4}Fe_{2.6}O_4$) on the porous ceramic fiber support (50 mm diameter${\times}$10 mm thickness). Effects of ferrite loading conditions on the CO2 decomposition efficiency were discussed in this paper. Removal of residual chloride ions and urea by solvent exchange from the porous media after ferrite deposition apparently helps to form spinel ferrite, but does not increase the efficiency of $CO_2$ decomposition. Porous ceramic fiber composites containing 20 wt% (1g) ferrite samples showed 100% efficiency for $CO_2$decomposition during the first three minutes, but the efficiency decreased rapidly after the elapsed time of ten minutes. The characteristic reduction time for the $CO_2$ decomposition efficiency was estimated as about 3∼7 min.