• The Journal of the Petrological Society of Korea
• /
• v.25 no.1
• /
• pp.39-50
• /
• 2016

Negative crystal shaped $CO_2$-rich fluid inclusions, trapped as primary inclusions in neoblasts and as secondary inclusions in porphyroblasts, were studied in spinel peridotite xenoliths from Jeju Island. Based on microthermometric experiments, the solid phase melts at $-57.1^{\circ}C$(${\pm}0.9^{\circ}C$) with no other observable melting events, indicating that the trapped fluid is mostly $CO_2$. The homogenization temperatures show a much wider range from $-39^{\circ}C$(${\rho}=1.12g/cm^{3)}$) to $23^{\circ}C$(${\rho}=0.82g/cm^{3)}$), suggesting that most of the inclusions (originally trapped at mantle conditions) re-equilibrated to lower density values. Nevertheless, the highest density $CO_2$ in our fluid inclusions is consistent with entrapment of fluids at upper mantle pressures (and depths). The calculated trapping pressure from $CO_2$-rich fluid inclusions that appear to be free from re-equilibrium, e.g., showing the lowest homogenization temperatures, is ${\approx}0.9GPa$. Based on the petrographic evidences, the fluid entrapment can be regarded as a late stage event in the evolution of the shallow lithospheric mantle.

• Journal of the Mineralogical Society of Korea
• /
• v.1 no.2
• /
• pp.83-93
• /
• 1988

Amethysts in Eonyang Granite of Woolju-Kun, Kyungnam Province are frequently parallelly grown on top of preexisting smoky quartz crystallized on milky and colorless quartz crystals, which, as a whole, resemble "mushroom" in outer appearance. Fluid inclusions in the amethysts may be grouped into (1) gaseous inclusions (G>L), (2) liquid inclusions (L>G), (3) $L_{CO_2}$-bearing inclusions (L+G+$L_{CO_2}$), (4) halite-bearing inclusions (L+G+halite), (5) multiphase inclusions (L+G+halite+sylvite${\pm}$opaque mineral). In addition, euhedral K-feldspars and acicular hematite crystals are included in colorless-milky quartz and deep purple-red quartz, respectively. Filling temperatures of each type of fluid inclusions were measured as follows: $320{\sim}560^{\circ}C$ for gaseous inclusions; $100{\sim}290^{\circ}C$ for liquid inclusions; $200{\sim}310^{\circ}C$ for $L_{CO_2}$-bearing inclusions; $300{\sim}430^{\circ}C$ for halite-bearing inclusions; and $370{\sim}430^{\circ}C$ for polyphase inclusions. The finished-gem amethysts from Eonyang may be distinguished from Brazilian amethysts by the difference in filling degree of gaseous inclusions by the presence of hematite aciculae, and of $L_{CO_2}$-bearing inclusions, and also by the absence of Zebra-striation structure. They may also be differentiated from synthetic amethysts by presence of straight color banding, solid inclusions, and $L_{CO_2}$-bearing inclusions which are not found in synthetic materials.

• Journal of the Korean earth science society
• /
• v.22 no.4
• /
• pp.278-291
• /
• 2001

Mesothermal gold vein minerals of the Seolhwa mine were deposited in a single stage of massive quartz veins which filled the mainly NE-trending fault shear zones exclusively in the granitoid of the Gyeonggi Massif. The Seolhwa mesothermal gold mineralization is spatially associated with the Jurassic granitoid of 161 Ma. The vein quartz contains three main types of fluid inclusions at 25$^{\circ}$C: 1) low-salinity (< 5 wt.% NaCl), liquid CO$_{2}$-bearing, type IV inclusion; 2) gas-rich (> 70 vol.%), aqueous type II inclusions; 3) aqueous type I inclusions (0${\sim}$15 wt.% NaCl) containing small amounts of CO$_{2}$. The H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl inclusions represent immiscible fluids trapped earlier along the solvurs curve at temperatures from 430$^{\circ}$ to 250$^{\circ}$C and pressures of 1 kbars. Detailed fluid inclusion chronologies may suggest a progressive decrease in pressure during the auriferous mineralization. The aqueous inclusion fluids represent either later fluids evelved through extensive fluid unmixing (CO$_{2}-CH$_{4}$ effervescence) from a homogeneous H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl fluid due to decreases in temperature and pressure, or the influence of deep circulated meteoric waters possibly related to uplift and unloading of the mineralizing suites. The initial fluids were homogeneous containing H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl components and the following properties: the initital temperature of >250$^{\circ}$ to 430$^{\circ}$C, X$_{CO}\;_{2}$ of 0.16 to 0.62, 5 to 14 mole% CH$_{4}$, 0.06 to 0.3 mole% N$_{2}$ and salinities of 0.4 to 4.9 wt.% NaCl. The T-X data for the Seolhwa gold mine may suggest that the Seolhwa auriferous hydrothermal system has been probably originated from adjacent granitic melt which facilitated the CH$_{4}$ formation and resulted in a reduced fluid state evidenced by the predominance of pyrrhotite. The dominance of negative ${\delta}\;^{34}$S values of sulfides (-0.6 to 1.4$%_o$o) are consistent with their deep igneous source.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.153-162
• /
• 2006

Fluid inclusions in amethyst from the Samcheonpo amethyst deposit of the Waryongsan area, Kyongnam generally grouped into four different types: Type I (liquid-rich and $10{\sim}23wt%$ NaCl, $Th=289{\sim}359^{\circ}C$), Type II (vapor-rich and $2{\sim}10wt%$ NaCl, $Th=304{\sim}365^{\circ}C;$), Type III (halite-bearing, $31{\sim}54wt%$ NaCl, $Th=259{\sim}510^{\circ}C;$), and Type IV ($CO_{2}-bearing\;9{\sim}13wt%\;NaCl,\;126{\sim}277^{\circ}$). Type I, II, and III inclusions are confined in the lower part of the amethyst and Type IV in the upper, which indicates significant hydrothermal activity during the earliest stage of the amethyst growth or the solidus condition of granitic rocks. The earliest fluid exsolved from the crystallizing granitic magma formed Type IIIa which is spatially associated with silicate melt inclusions. The homogenization behavior of Type IIIa inclusions by dissolution of the halite crystal after the bubble disappearance indicates that Type IIIa inclusions were trapped at some relatively elevated pressure. Exsolution of Type IIIb, I, II forming fluids with gradual decrease in their salinity was followed. The last fluid was $CO_{2}-bearing$ fluid (Type IV), which is assumed to be derived by decarbonization reactions with the surrounding sedimentary rocks. It suggests that the fine-grained granitic rocks containing the Samcheonpo amethyst crystallized at the sub-solvus condition saturated with water and exsolved abundant water.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.561-573
• /
• 1999

Mesothermal gold deposits of the Heungdeok, Daewon and Ilsaeng mines in the Youngdong area occur in fault shear zones in Precambrian metamorphic rocks of central Sobaegsan Massif, Korea, and formed in single stage of massive quartz veins (0.3 to 3 m thick). Ore mineralogy is simple, consisting dominantly of pyrrhotite, sphalerite and galena with subordinate pyrite, chalcopyrite, electrum, tetrahedrite and native bismuth. Fluid inclusion data indicate that hydrothermal mineralization occurred at high temperatures (>240$^{\circ}$ to 400$^{\circ}$C) from $H_{2}O-CO_{2}(-CH_{4})$-NaCI fluids with salinities less than 12 wt. % equiv. NaC!. Fluid inclusions in vein quartz comprise two main types. These are, in decreasing order of abundance, type I (aqueous liquid-rich) and type II (carbonic). Volumetric proportion of the carbonic phase in type II inclusions varies widely in a single quartz grain. Estimated $CH_4$ contents in the carbonic phase of type II inclusions are 2 to 20 mole %. Relationship between homogenization temperature and salinity of fluid inclusions suggests a complex history of fluid evolution, comprising the early fluid's unmixing accompanying $CO_2$ effervescence and later cooling. Estimated pressures of vein filling are at least 2 kbars. The ore mineralization formed from a magmatic fluid with the ${\delta}^{34}S_{{\Sigma}S}$, ${\delta}^{18}O_{water}$ and ${\delta}D_{water}$ values of -2.1 to 2.2$\textperthousand$, 4.7 to 9.3$\textperthousand$ and -63 to -79$\textperthousand$, respectively. This study validates the application of a magmatic model for the genesis of mesothermal gold deposits in Youngdong area.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.1 s.51
• /
• pp.7-19
• /
• 2007

Four types of fluid inclusions are trapped within tourmaline from Daeyou pegmatite, Jangsu-Gun, Jeonllabukdo. They range $5{\sim}100\;{\mu}m$ in size and are grouped into I, II, III, and IV based on the phase behavior at the room temperature: (1) Type I inclusions are liquid-rich and NaCl equivalent salinity ranged $0{\sim}12\;wt%$, and the homogenization temperatures (Th) ranged $181{\sim}230^{\circ}C$ with eutectic temperatures (Te) $-54{\sim}-22^{\circ}C$. (2) Type II inclusions are vapor-rich and salinity ranged $3{\sim}8\;wt%$ NaCl, and Th ranged $177{\sim}304^{\circ}C$ also showing Te $-54{\sim}-29^{\circ}C$. (3) Type III inclusions contain a halite daughter mineral with $31{\sim}40\;wt%$ NaCl, Th $230{\sim}328^{\circ}C$. More than 90% of Type III homogenize by halite dissolution and are spatially associated with silicate melt inclusions. (4) Type IV inclusions are $CO_{2}$-bearing containing various daughter minerals such as sylvite and/or halite. The density of $CO_{2}$ system within the Type IV is $0.80{\sim}0.75\;g/cm^{3}$, Th $190{\sim}317^{\circ}C$, and salinity $2{\sim}35\;wt%$ NaCl. Type III fluid inclusions, considered as the earliest fluid, formed from the fluid exsolved from the crystallizing pegmatite. It is suggested that Type II fluid in the central part of tourmaline were exsolved earlier than Type I fluids in the margin indicating salinity fluctuation during the growth of tourmaline. It implies the fluctuation of the pressure since the salinity of fluid exsolved from the crystallizing melt is governed by the pressure. The last fluid was Type IV, which may be derived from the nearby limestone and metasedimentary rocks. It is suggested that Daeyou pegmatite containing muscovite without miarolitic cavities was formed by the partial melting resulted from the regional metamorphism. Subsequently, the exsolving fluids from the crystallizing melt were trapped in tourmaline at high pressure condition. The exsolved fluids contain various components such as $CaCl_{2}\;and\;MgCl_{2}$ as well as NaCl and KCl. The exsolution began at least at $2.7{\sim}5.3\;kbar\;and\;230{\sim}328^{\circ}C$ with the pressure fluctuation.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.11-19
• /
• 2013

The Daehwa Mo-W deposit is located within the Gyeonggi massif. Quartz and calcite vein mineralization occurred in the Precambrian gneiss and Jurassic granites. Three main types (Type I: liquid-rich $H_2O$ type, Type II: vapor-rich $H_2O$ type, Type III: $CO_2-H_2O$ type) of fluid inclusions were observed and are classified herein based on their phase relations at room temperature. Within ore shoots, type III fluid inclusions have been classified into four subtypes (type IIIa, IIIb, IIIc and IIId) based on their volume percent of aqueous and carbonaceous ($CO_2$) phase at room temperatures combined with their total homogenization behavior and homogenization behavior of $CO_2$ phase. Homogenization temperatures of primary type I fluid inclusions in the quartz range from $374^{\circ}C$ to $161^{\circ}C$ with salinities between 13.6 and 0.5 equiv. wt.% NaCl. Homogenization temperatures of primary type III fluid inclusions in quartz of main generation, are in the range of $303^{\circ}C$ to $251^{\circ}C$. Clathrate melting temperatures of the type III fluid inclusions were 7.3 to $9.5^{\circ}C$, corresponding to salinities of 5.2 to 1.0 equiv. wt. % NaCl. Melting and homogenization temperatures of $CO_2$ phase of type III fluid inclusions were -57.4 to $-56.6^{\circ}C$ and 29.0 to $30.8^{\circ}C$, respectively. Fluid inclusion data indicate a complex geochemical evolution of hydrothermal fluids. The Daehwa early hydrothermal system is characterized by $H_2O-CO_2$-NaCl fluid at about $400^{\circ}C$. The main mineralization occurred by $CO_2$ immiscibility at temperatures of about 300 to $250^{\circ}C$. At the late base-metal mineralization aqueous fluid formed by mixing with cooler and less saline meteoric groundwater.

• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.167-174
• /
• 1993

Limited geochemical components have been detected in fluid inclusions from ore deposits in south Korea by non-destructive and destructive analytical methods. Review of fluid inclusion studies display that the homogenization temperatures and salinities are in direct proportion. W and Cu ore deposits tend to show higher homogenization temperatures and salinities than Au ore deposits. Abundant halite-bearing fluid inclusions from the Eonyang Granite producing precious amethyst crystals may indicate that the initial fluid originated from magma is highly saline as shown by the quartz from the granite. Raman Laser microprobe detected $CO_2$, $N_2$ and $CH_4$ in a gold deposit, while these components are hardly detected from other deposits, even though destrucive analysis has dectected $CO_2$, $N_2$, $CH_4$, $H_2S$, and $SO_2$ from most of ore deposits. Individual fluid inclusion shows quite different components. These results suggest that large numbers of fluid inclusions should be analysed by Raman Laser microprobe to gain reliable data. Halite-bearing inclusion is hardly found in fluid inclusions from epithermal gold deposits in south Korea. Geochemistry, homogeinzation temperature and salinity of fluid inclusions may be useful to apply for exploration to find a concealed orebody.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.167-175
• /
• 2009

The geology of Sepola district in Mali is consisted of Birrimian group with metasedimentary rocks of lower Proterozoic and volcanoclastics, and later intrusive igneous rocks. Ore diposit in this district has the characteristics of vein- and disseminated-type gold deposit which was formed by infilling the secondary fracture zones related to the large-scale fault zone of NW direction within Birrimian group. It is confirmed as promising that Barani district has the gold grade of 0.53${\sim}$9.21 g/t with the extension of 1.3 km and width of 1 to 20.1 m. The ore mineralogy is simple with electrum, pyrite and galena. Fineness of gold grain ranges from 848 to 915(average 891) indicating mesothermal to hypothermal environment. Fluid inclusions are classified as liquid-rich type I. gas-rich type II and liquid-$CO_2$ bearing type III. Primary and pseudosecondary inclusions homogenize from 236 to 393$^{\circ}C$ with salinity of 0.0 to 8.6 wt% NaCl. Secondary inclusions homogenize from 103 to 184$^{\circ}C$ with salinity of 0.7 to 8.6 wt.%. From the relationship between homogeniztion temperature and salinity, it may be thought that auriferous fluid experienced dilution and cooling through inflow of meteoric water after fluid unmixing derived from pressure decrease in the temperature range of 400 to 250$^{\circ}C$. From the massive occurrence of quartz vein, simple mineralogy with paucity of sulfide, and presence of liquid-$CO_2$ bearing with high homogenization temperature, it is thought that gold mineralization in Sepola district correspods to the mesothermal to hypothermal ore deposit.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.273-281
• /
• 2022

Mantle heterogeneity is closely related to the distribution and circulation of volatile components in the Earth's interior, and the behavior of volatiles in the mantle strongly influences the rheological properties of silicate rocks. In mantle xenoliths, these physicochemical properties of the upper mantle can be recorded in the form of microstructures and fluid inclusions. In this paper, I summarized and reviewed the results of previous studies related to the characteristics of microstructures and fluid inclusions from peridotite xenoliths beneath the Rio Grande Rift (RGR) in order to understand the evolution and heterogeneity of upper mantle. In the RGR, the mantle peridotites are mainly reported in the rift axis (EB: Elephant Butte, KB: Kilbourne Hole) and rift flank (AD: Adam's Diggings) regions. In the case of the former (EB and KB peridotites), the type-A lattice preferred orientation (LPO), formed under low-stress and low-water content, was reported. In the case of the latter (AD peridotites), the type-C LPO, formed under low-stress and high-water content, was reported. In particular, in the case of AD peridotites, at least two fluid infiltration events, such as early (type-1: CO₂-N₂) and late (type-2: CO₂-H₂O), have been recorded in orthopyroxene. The upper mantle heterogeneity recorded by these microstructures and fluid inclusions is considered to be due to the interaction between the North American plate and the Farallon plate.