• 한국물환경학회지
• /
• 제28권2호
• /
• pp.202-212
• /
• 2012

Due to the deterioration of water supply network and the deficiency of raw water, the water utility of local governments have performed various projects to improve their revenue water ratio. However, it is very difficult to estimate the cost for maintaining the revenue water ratio at higher level after completing the project, because local governments have different conditions affecting the operating and maintenance cost of water supply network. The purpose of this study is to present a procedure to estimate the operating and maintenance cost required to maintain the target revenue water ratio of the water supply network. For this purpose, we estimated the cost used only for operation and maintenance of water supply network of 164 local governments with the aid of K-Mean Clustering Analysis and the data from 40 representative local governments. Then, the regression analysis was performed to find relationship between revenue water ratio and the operating and maintenance cost with two different data sets generated by two classification methods; the first method classifies the local governments by means of k-means clustering, and the other classifies the local governments according to the index standardized by the operating and maintenance cost per unit length of water mains per revenue water ratio. The results shows that the method based on the index standardized by the cost and revenue water ratio of each government produces more reliable results for finding regression equations between revenue water ratio and the operating and maintenance cost only for water supply network. The estimated regression equations for each group can be used to estimate the cost required to keep the target revenue water ratio of the local government.

• 산업공학
• /
• 제25권3호
• /
• pp.338-346
• /
• 2012

Regarding the green environment, it is important to boost the spread of environmentally friendly vending machines and to operate the vehicles for their inventory replenishments while minimizing emissions of greenhouse gases. In general, the vending machine management company lacks capability to operate the supply chain effectively in an integrated way under the dynamic, complex, and stochastic environment. This paper presents a decision support system, termed DSSVM, for the operations of the general and smart vending machine supply chains with stock-out-based, one stage item substitution in a green logistics environment. The DSSVM supports the estimation of item demand and substitution probabilities, determination of operation parameters, supply chain analysis, what-if analysis, and $CO_2$ analysis for which various analytical models are employed.

• 한국식품영양학회지
• /
• 제30권2호
• /
• pp.356-362
• /
• 2017

The aims of this study was to investigate the satisfactions with school food service and its influencing factors for elementary and middle school parents. We surveyed parents regarding their concerns about food ingredients and dietary life, perceptions of free school food service, the necessity of food supply systems such as school food service centers, and the satisfaction about the quality and management of school food services. Compared to the last year, concerns about food ingredients and dietary life as well as perceptions about free school food services decreased. The reported necessity of supply system such as school food service centers and co-purchasing was lower than in 2015. The satisfaction about the school food service decreased, compared to 2015. More individuals had higher concerns about local food and stated the necessity for school food supply systems, as well as a higher satisfaction about the quality and management of school food services. In conclusion, it is important to emphasize characteristics of school food services such as co-purchasing local foods.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.38-41
• /
• 2007

The increase of $CO_2$ emission by increasing of fossil fuel usage has been understood a major cause of global warming. The supply of electric energy is heavily dependent on the massive thermal power and nuclear power plant before developing the renewable energy to supply the electric energy stably at a low price. The large and sound forged components of pressure vessel, turbine and generator are widely used in power plant such as wind power, hydroelectric power generation, nuclear power and thermal power plant. This paper is discussed the trend of manufacturing technology for pressure vessel and turbine to satisfy the required condition of utility company. It is also introduced a strategy of forging industry to cope with carbon tax.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2008년도 춘계학술 발표회
• /
• pp.41-60
• /
• 2008

This paper analyses the main cause of pollution in Beijing city-the limiting of the pollution caused by coal burning has seen important progress, and natural gas is assuming an important role in China's energy strategy as the country actively seeks new and cleaner sources of energy, since 1997 to 2007, the gas supply for Beijing was given, compared with the air quality standard above II which set up by WHO(World Healthy Organization), as a result the important relationship between the environment and gas using was found, then the percent of $SO_2$, $NO_2$, PM10, CO, $O_3$ of air was shown from August $8^{th}-24^{th}$ 2006, Which it was verified that the quality of air will be perfect within the standard of WHO during the Olympic Game 2008 China.

• Tribology and Lubricants
• /
• 제34권2호
• /
• pp.43-48
• /
• 2018

This paper presents the thermohydrodynamic analysis of tilting journal pad bearings supporting a power turbine rotor applied to a 250 kW super-critical $CO_2$ cycle. In the analysis, the generalized Reynolds equation and 3D energy equation are solved to predict oil film temperature and the 3D heat conduction equation is solved for pad temperature. The power turbine rotor is supported by two tilting pad bearings consisting of five pads with an oil supply block between the pads. Copper backing pads with higher thermal conductivity compared to steel backing pads are adopted to improve thermal management. The predicted maximum pad temperature is around $55^{\circ}C$ which is approximately $15^{\circ}C$ higher than oil supply temperature. In addition, the predicted minimum film thickness is 50 mm at a rotating speed of 5,000 rpm. These results indicate that there is no issue in the thermal behavior of the bearing. An operation test is performed with a power turbine module consisting of a power turbine, a reduction gear and a generator. Thermocouples are installed at the 75% position from the leading edge of the pad to monitor pad temperature. The power turbine uses compressed air at a temperature of $250^{\circ}C$ in its operation. The steady state pad temperatures measured in the test show good agreement with the predicted temperatures.

• 한국주거학회논문집
• /
• 제9권1호
• /
• pp.143-152
• /
• 1998

This study aims to suggest ventilation design data for Public Entertainment Facilities in relation to Indoor Air Quality. The concentration of indoor air pollution such as CO, CO2, RH, Radon, HCHO, TSP was investigate, and the reguired ventilation rate of Public Rooms was calculated. As resuits of this study, the following conclusion could be obtained. Field measurement of P.E.F reveals that the concentration of CO2 was mist polluted and higher than IAQ standard, while that of other pollutats did not exceed the standard. In underground the concentration of CO2 increased 1130ppm(2 persons) 2170ppm(4 persons) 1970ppm(6 persons). The CO2 pollution was serions problem in underground more than second floor, in only exhaust ventilation system more than exhaust and supply system.

• 자원환경지질
• /
• 제56권2호
• /
• pp.155-166
• /
• 2023

COVID-19를 겪으면서 광물자원의 공급망 관리 중요성이 극대화되었다. 특히 수요 및 공급 관리가 어려운 광물자원은 우리나라가 적극적으로 추진하고 있는 소재부품산업의 원료확보 차원에서 공급망 관리가 중요하다. 본 연구에서는 광종별로 글로벌 공급위험과 공급위험 발생시 국내 경제적 영향의 유·무형 요인을 정량화하고 위험상태 행렬(criticality matrix-criticality level)을 이용하는 핵심광물을 선정하는 체계를 수립하고 평가를 수행하였다. 독과점성, 생산국가 불안정성, 사회환경정책 규제성, 수입 불안정성, 리스크 대응력, 시장규모, 시장 확장성, 경제적 중요성 등을 평가항목으로 하였다. 국내 신성장 사업에 활용되는 40여종의 광물을 평가하여 15종(Li, Pt, Co, V, REE, Mg, Mo, Cr, Ti, W, C, Ni, Al, Mn, Si)을 핵심광물로 선정하였다. 해당 결과는 자원안보 강화를 위한 정책 수립과 기업의 원료 포트폴리오 구성을 위한 의사결정 등에 활용될 수 있을 것으로 기대한다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.127-132
• /
• 2001

We describe the pulse forming of pulsed $CO_2$laser using multi-pulse superposition technique. A various pulse length, high duty cycle pulse forming network(PFN) is constructed by time sequence. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on SCRs of three PFN modules consecutively at a desirable delay time with the aid of PIC one-chip microprocessor. The power supply for this experiment consists of three PFN modules. Each PFN module uses a capacitor, a pulse forming inductor, a SCR, a High voltage pulse transformer, and a bridge rectifier on each transformer secondary. The PFN modules operate at low voltage and drive the primary of HV pulse transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence. We investigated laser pulse shape and duration as various trigger time intervals of SCRs among three PFN modules. As a result, we can obtain laser beam with various pulse shapes and durations from about 250 $mutextrm{s}$ to 600 $mutextrm{s}$.

• International Journal of Fluid Machinery and Systems
• /
• 제2권1호
• /
• pp.72-79
• /
• 2009

The effect of symmetric and asymmetric micro regenerative pump impellers on their pressure performance was studied. The shut off head of the pump with the symmetric impeller was about 2.5 times as that with the asymmetric impeller. The computation of the internal flow was performed to clarify the cause of the increase of the head. It was found that the contribution of the angular momentum supply was larger than that of shear stress for the head development in both cases. The larger head and momentum supply in the case of the symmetric impeller were caused by larger recirculated flow rate and larger angular momentum difference between the inlet and outlet to the impeller. The larger recirculated flow rate was caused by smaller pressure gradient in the direction of recirculated flow. The decrease of the circumferential velocity in the casing was attributed to the smaller local flow rate in the casing.