• 상하수도학회지
• /
• 제26권4호
• /
• pp.555-563
• /
• 2012

Due to the importance of energy-saving and CO2 reduction is being emphasized in the world, efforts to find a solution for the problems is increasing rapidly. In particular, the renewable energy is on understanding as a breakthrough for the protection of the environment and the economic development, so it is intensively fostered as future industries. Developed countries are already pursuing policy and technology development related with renewable energy. In this paper, we will develop MHD(Magneto Hydro Dynamics) technology to supply the commercial power that can is targeted at water pipe related with hydro power among renewable energy technologies. Kinetic energy of fluid flowing in the water pipe is converted into electric power. It allows stable power supply to the various sensors and devices on water pipe. We have performed several experiments to verify the application possibility of the developed technologies and present the result and a method of performance improvement of the technologies.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.124-127
• /
• 2008

The behavior of Penicillium camembertii and Geotrichum candidum growing in submerged pure cultures on simple (glutamate) or complex (peptones) substrates as nitrogen and carbon sources and lactate as a second carbon source was examined. Similar to the behavior previously recorded on a simple substrate (glutamate), a clear differentiation between the carbon source and the energy source was also shown on peptones and lactate during P. camembertii growth, since throughout growth, lactate was only dissimilated, viz., used for energy supply by oxidation into $CO_2$, whereas peptides and amino acids from peptones were used for carbon (and nitrogen) assimilation. Because of its deaminating activity, G candidum preferred peptides and amino acids to lactate as energy sources, in addition to being assimilated as carbon and nitrogen sources. From this, on peptones and lactate, G candidum grew faster than P. camembertii (0.19 and 0.08 g/l/h, respectively) by assimilating the most readily utilizable peptides and amino acids; however, owing to its lower proteolytic activity, the maximum biomass was lower than that of P. camembertii (3.7 and 5.5 g/l, respectively), for which continuous proteolysis and assimilation of peptides were shown.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.110-115
• /
• 2014

The nuclear power plant was launched by Kori unit 1 in 1978 years. Currently, 23 nuclear power plants have been operating in Korea since 1978 years. The localization was completed for most of the reactor facility from Hanbit(Youngkwang) unit 3&4. However, RCP(Reactor Coolant Pump) and MMIS(Man Machine Interface System) is an important technology that has been excluded from the scope of the technical transfer has been dependent on a specific overseas vendor. Recent success in RCP development through co-operation with government and industries. Developed RCP will be applied to Shin-Hanul unit 1&2 nuclear power plants. The RCP operates in high speed and high pressure condition and only rotating component in the NSSS(Nuclear Steam Supply System). Therefore, the problem of vibration has arisen caused by the hydraulic forces of the working fluid. These forces can influence on the stability characteristics for entire RCS(Reactor Coolant System) loop, and can act as significant destabilizing forces. In this study, vibration evaluation of the pump shaft of development RCP estimated under normal operation and over speed conditions. In order to predict the vibration characteristics and dynamic behavior, modal analysis, critical speed analysis and unbalance response spectrum analysis were performed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.873-876
• /
• 2005

본 논문은 광대역 CMOS 연상증폭기를 위한 새로운 전류 전이 검사 기술을 제안한다. 본 검사 방법에서는 결함이 있는 연산증폭기와 결함이 없는 연산 증폭기를 자동적으로 구별해 내기 위해 증폭기의 공급 전원으로부터 순간적으로 변하는 전류와 출력응답을 측정한다. 광대역 CMOS 연산증폭기는 0.25${\mu}$m CMOS 공정을 이용하여 설계되었다. 이 검사 기술은 CMOS 연산증폭기내에서 발생한 거폭결함 (catastrophic faults)을 검출하고 분석할 수 있으며, 검사비용이 저렴하고 측정방법이 간단하다.

• 청정기술
• /
• 제7권1호
• /
• pp.43-49
• /
• 2001

$CO_2$ 의무규제에 대비해 국내외의 대응방안 및 기술개발 동향과 국내 산업계 대처방안, 향후 발전분야에 미칠 영향 등을 분석하였다. 의무규제에 대비하여 가장 많은 준비가 된 유럽은 에너지 효율 개선 및 대체에너지 개발에 많은 투자를 하고 있으며, 일본은 에너지 절약 및 해외사업을 통해 감축의무를 준수하도록 하는 동시에, 장기 기술개발 계획에 따라 여러 분야에서 R&D 투자가 활발히 이루어 지고 있다. 또한, 미국은 에너지 절약 프로그램 및 배출권 거래제를 이용하여 감축의무에 대비하고 있으며 최근에 DOE(Department of energy)등을 중심으로 경제성 있는 신기술 분야에 집중 연구하는 경향을 보여주고 있다. 우리나라도 향후 의무부담을 받을 경우를 대비하여 그동안 정부 및 출연연구소 중심으로 연구가 수행되어 왔다. 한편, 감축의무 적용시 가장 먼저 이행이 예상되는 발전분야에 대해 선진국중 완화된 기준을 가지는 포르투갈 감축기준을 적용하였을 경우, 제5차 장기전력 수급계획에 따른 청정연료 등의 전환 등의 자발적 감축노력에도 불구하고, 2015년 이후 가동중인 발전소중 50여기를 가동 중지해야 하는 사태가 발생할 수 있음을 발전분야 감축의무량 분석결과를 통해 도출하였다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.577-582
• /
• 2016

최근 급속한 녹색환경 정책으로 LED를 이용한 조명 광원들이 설치 운용하고 있으나, 이들 광원의 전원 공급은 안정된 직류 전원 공급을 위해서 스위칭 모드 전원 공급(SMPS) 장치로 전원을 공급하고 있다. 그러나, 이들 전원 공급 장치는 공급 단가 때문에 설계 및 설치과정에서 스위칭에 따른 전력과 변환역률, 전기적 노이즈 및 돌입전류들은 간과하고 있다. 따라서, 본 연구에서는 SMPS는 고품질의 전원을 LED 조명 부하에 공급하기 위하여 스위칭 시에 다음과 같은 3가지 관점에서 회로를 연구하였다. 첫 번째, 역률과 효율을 약 85% 확보하고, 두 번째, 노이즈(고조파 포함) 최소화, 세 번째는 스위치-온 시 3A 돌입전류를 $100{\mu}sec$ 후 최소 0.3 A로 감소하여 돌입 전류 침입을 최소화 하고자 하였다. 본 연구에서는 IC형 구동기(LNK 409)를 적용하여 입력전압과 출력상황을 귀환 형태로 감시하도록 하였으며, 정전류 출력을 위하여 정전압을 유지할 수 있는 제어회로와 시상수를 개발하였다. 그러나, 부하 변동 시 미세한 전류의 불규칙으로 인한 발열 문제는 해결하지 못하고 있다. 이를 증명하고자 LED 조명 부하 46 W급을 대상으로 효과를 검증하였다.

• Environmental Engineering Research
• /
• 제10권4호
• /
• pp.181-190
• /
• 2005

Severe loss or hydrogen occurred in most anaerobic hydrogen fermentation reactors. Several selected methods were applied to suppress the consumption of hydrogen and increase the potential of production. As the first trial, pH shock was applied. The pH of reactor was dropped nearly to 3.0 by stopping alkalinity supply and on]y feeding glucose (5 g/L-d). As the pH was increase to $4.8{\pm}0.2,$ the degradation pathway was derived to solventogenesis resulting in disappearance of hydrogen in the headspace. In the aspect of bacterial community, methanogens weren't detected after 22 and 35 day, respectively. Even though, however, there was no methanogenic bacterium detected with fluorescence in-situ hybridization (FISH) method, hydrogen loss still occurred in the reactor showing a continuous increase of acetate when the pH was increased to $5.5{\pm}0.2$. This result was suggesting the possibility of the survival of spore fanning acetogenic bacteria enduring the severely acidic pH. As an alternative and additive method, nitrate was added in a batch experiment. It resulted in the increase of maximum hydrogen fraction from 29 (blank) to 61 % $(500\;mg\;NO_3/L)$. However, unfortunately, the loss of hydrogen occurred right after the depletion of nitrate by denitrification. In order to prevent the loss entangled with acetate formation, $CO_2$ scavenging in the headspace was applied to the hydrogen fermentation with heat-treated sludge since it was the primer of acetogenesis. As the $CO_2$ scavenging was applied, the maximum fraction of hydrogen was enhanced from 68 % to 87 %. And the loss of hydrogen could be protected effectively.

• 에너지공학
• /
• 제16권4호
• /
• pp.181-186
• /
• 2007

본 연구에서는 이산화탄소의 증발열전달 특성을 이해하기 위해 질량유속, 열유속 기리고 포화온도를 변화시키면서 이산화탄소의 증발 열전달계수와 압력강하를 측정하였다. 질량유속과 열유속은 기존의 실험범위보다 크게 확장하여 내경 7.75 mm, 길이 5.0 m의 수평관에서 실험하였다. 실험장치는 시험부, 전원공급기, 히터, 칠러, 기어펌프, 유량계, 계측시스템 등으로 구성되었다. 건도가 증가할수록 증발 열전달계수는 감소하였으며, 이산화탄소의 증발 열전달계수는 질량유속보다 열유속에 더 민감함을 확인하였다. 또한 주어진 열유속과 포화온도에 따라 증발 열전달계수의 급격한 감소가 다르게 관찰되었다. 압력강하는 질량유속 증가에 대해 선형적인 증가를 보였지만 열유속 증가에 대한 압력강하의 증가효과가 크지 않았다.

• 터널과지하공간
• /
• 제8권1호
• /
• pp.8-16
• /
• 1998

The first purpose of this study is to verify the application of computer modelling to a enclosed space fire. The second one is to determine temperature distribution for the three different ventilation types in case of a enclosed space fire. The third one is to find out the ventilation direction and ventilation quantity to remove effectively heat and combustion products generated by a fire in variable air volume(VAV) system. Firstly, compared with experimental results of Lawrence Livermore National Laboratory(LLNL), numerical results show good agreements. Secondly, among three different ventilation types, the numerical analyses show the highest temperature distribution in occupied zone(up to 1.8 m from bottom) from firing moment to 100 sec. when supply ducts are placed in ceiling and extract duct is placed close to the bottom on side walls. This is due to disadvantageous position of extract duct in ventilating high temperature air which rise because of buoyancy force. Thirdly, this study finds out effective ventilation direction and ventilation quantity to remove heat and combustion products generated by a fire by using VAV system. $CO_2$ concentration is used as a fire fume removal index. As soon as a fire happens, ventilation direction is changed in order to gather and drive out fire fumes. In case of three times ventilation quantity of ordinary one, $CO_2$ concentration and temperature have begun to decrease at 120 sec. after firing, i.e.fire fumes have begun to be removed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.152-158
• /
• 2015

Unlike photovoltaic systems installed on land, photovoltaic systems applied to the offshore plant have the characteristic that is installed in a limited space. For single point mooring plant, it is advantageous in terms of a reliable power supply to be installed in different directions of photovoltaic panels, because it is not possible to identify the position of the sun by rotation of the plant itself. Differences of installation angle between photovoltaic panels make a difference of the intensity of radiation irradiated on each photovoltaic panel, and it brings loss of generation quantity due to the partial shading. In order to provide a photovoltaic system suitable for offshore plant, the modeling which contains multiple photovoltaic panels controlled by single controller is performed. Then, it was examined how the output characteristics of the photovoltaic system change about the difference of the intensity of radiation that varies depending on the altitude of the sun. Finally, through the simulation, a development model of the photovoltaic system which is suitable for offshore plant is suggested.