• 해양환경안전학회지
• /
• 제16권2호
• /
• pp.229-234
• /
• 2010

최근 온실가스 감축을 위한 세계 각국의 노력이 다각도로 진행되고 있으며, 국제적인 협력 또한 시급히 요구되고 있다. 이러한 노력의 일환으로 해운 업계에서는 항내에서 유발되는 선박 기인 온실가스 배출량 중 탄소에 대한 배출량 감축과 선박운항 비용 절감을 위한 친환경 항만 체계 구축 방안이 활발히 논의되고 있다. 이 논문에서는 탄소 배출량 감축 및 친환경 항만 체계 구축의 기초 연구로 정박 중인 선박에 자체 생산 전력을 공급하는 대신 육상전력을 공급하는 방안을 모색하였다. 이를 위하여 실제 운항중인 목포해양대학교의 실습선 새누리호를 대상으로 정박 중인 선박이 육상전력을 사용함으로써 얻을 수 있는 환경적 비용적 효과에 관해 고찰하였다. 연구 결과 육상전력을 사용한 경우에 $CO_2$ 배출량은 약 32.5%가 감소되었고, 운항비용은 약 33%가 절감된 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2098-2100
• /
• 2000

We propose pulsed $CO_2$ laser below 30W by the AC(60Hz) switching control of leakage transformer primary which has some advantage of cost and size compared to a typical pulsed power supply. Pulse repetition rate is adjusted from 5Hz to 60Hz to control laser output. In this laser, a low voltage open loop control for high voltage discharge circuit is employed to avoid the HV sampling or switching and high voltage leakage transformer is used to convert rectified low voltage pulse to high voltage one. A ZCS(Zero Cross Switch) circuit and a PIC one-chip microprocessor are used to control gate signal of SCR precisely. The pulse repetition rate is limited by 60Hz due to the frequency of AC line and a high leakage inductance. The maximum laser output was obtained about 23W at pulse repetition rate of 60Hz, total gas mixture of $CO_{2}/N_{2}$/He = 1/9/15, SCR gate trigger angle 90$^{\circ}$, and total pressure of 18Torr.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.33-33
• /
• 2017

본 연구는 온실 $CO_2$ 공급용 Membrane Module이 대기 중 $CO_2$를 포집하는 과정에서 유해병원균을 제거할 수 있는지 알아보기 위해 실험을 진행하였다. 본 실험은 Membrane Module과 유해병원균의 유무로 총 4개의 실험구, 포집하는 시간에 따라 1 min, 3 min, 5 min, 각각 3회씩, 총 36회의 실험을 진행하였다. 실험은 경상대학교 내 온실($W{\times}D{\times}H$, $3000{\times}4000{\times}2500mm$)에서 진행하였고, 유해병원균은 잎점무늬병을 일으키는 병원균(Phoma sp.)을 사용하였다. 온실에 Membrane System을 설치하고 Membrane Module을 통해 외부공기 또는 유해병원균이 포함된 공기를 분리하여 온실 내로 공급하고, 공급한 $CO_2$ 내에 유해병원균의 유무는 에어샘플러를 이용하여 온실 내의 공기를 포집 후 배지에 배양하여 확인하였다. 유해병원균은 PDA배지를 이용하여 포집한 뒤 항온항습기(HB-105SG-O, HANBAEK SCIENTIFIC CO., Korea)에 $25^{\circ}C$, 50%로 48시간 배양하였다. PDA배지 내에 배양된 미생물은 Colony Counter(HYC-560, CORETECH, Korea)로 측정하였다. 결과 값을 분석하기 위해서 IBM SPSS Statistics의 이원분산분석(two-way ANOVA)을 이용하여 통계분석 하였다. 결과 값은 유해병원균을 공급하고 Membrane Module을 사용하지 않았을 때, CFU(Colony-Forming Unit)가 가장 높았고, 유해병원균을 공급하고 Membrane Module을 사용했을 때 CFU가 가장 낮았다. 통계분석을 실시한 결과, Membrane Module을 사용하지 않은 실험구에는 유의한 차이가 나타났고, Membrane Module을 사용한 실험구에는 유의한 차이가 나타나지 않았다. 따라서 Membrane Module이 대기 중 $CO_2$를 분리하여 온실에 공급하는 과정에서 공기 중에 포함된 유해병원균을 제거 할 수 있다고 판단된다.

• 대한치과보철학회지
• /
• 제36권1호
• /
• pp.64-80
• /
• 1998

The risk of cross-contamination in dental clinic is very high. Those who are engaged in dental clinic are exposed to various microorganisms in saliva and blood of patient. Potential possibility of cross-contamination of patient to patient, patient to dentist, dentist to laboratory technician always exist, which is important in the view of public health. It is well known that microorganisms may cause cross-contamination by suck-back of microorganisms into the water supply line or air supply line of dental unit and sprayed back into the next patient's oral cavity. The majority of microorganisms coming from dental unit are water microorganisms from the main water supply which have colonized the tube within the units and multiplied in the relatively warm and stagnant conditions. The purpose of this study is to measure the extent of microbial contamination of dental unit and ultrasonic scaler, to evaluate that dental unit water supply is suitable for drinking water, and to assess the effect of flushing on reduction of microbial contamination of dental unit and ultrasonic scaler. In the first experiment, water samples(50ml) from 20 dental units and 10 ultrasonic scalers in Seoul National Univ. Hosp. were tested for the presence of coliform. The samples were filtered by membrane filtration technique.(Microfil system, Millipore Co. U. S. A.) The filter was then placed onto MacConkey agar plate and the plates with filter on it were incubated aerobically at $37^{\circ}C$ for 5 days. The colors and shapes of colonies were examined if those were coliform. To verify the presence of coliform, the colonies were inoculated into phenol red lactose broth and incubated aerobically at $37^{\circ}C$ for 2 days. The fomation of gas was observed. In the second experiment, water samples from 20 handpieces, 10 ultrasonic scalers and 30 A/W syringes after 0, 2, 4, 6 min. flushing respectively were taken. $200{\mu}l$ water samples were spreaded on Brain Heart Infusion agar plate and the plates were incubated aerobically at $37^{\circ}C$ for 5 days. The number of colony was counted. The results obtained were summarized as follows 1. The water from dental unit and ultrasonic scaler was not suitable for drinking water. 2. No coliform was founded in dental unit and ultrasonic scaler water supply. 3. The number of colony of dental unit and ultrasonic scaler was highest in the group of o min. flushing(p<0.05). 4. There was no statistically significant difference in the extent of microbial contamination among handpiece, ultrasonic scaler and A/W syringe (p>0.05). 5. The number of colony was lowest in the group of 4 min. flushing, but there was no statistically significant difference among 2, 4, 6 min. flushing groups.(p>0.05) 6. It is recommended to flush dental unit water line for 4 min. after use on each patient.

• 한국건설관리학회논문집
• /
• 제25권5호
• /
• pp.41-54
• /
• 2024

본 연구에서는 프리캐스트 콘크리트(Precast Concrete; PC) 제작공장의 원자재 재고관리를 위한 세 가지 재고관리 정책, 정량 발주 방식, 정기 발주 방식, (s, S) 발주 방식의 성능을 비교·분석한다. 보다 현실적인 결론의 도출을 위해, 복수 원자재를 사용하는 PC 제작공장의 전체 공정을 대상으로 원자재 수요 및 공급 측면의 변동성을 고려하여 개발된 성능평가 도구인 ARENA 시뮬레이션 모델을 활용하였다, 성능 비교를 위해, 먼저 세 가지 재고관리 정책에 대해 경제적주문량(Economic Order Quantity; EOQ)을 초깃값으로 하여 OptQuest를 통해 재주문점, 주문량, 목표수준 및 주문주기 모수를 최적화하였다. 최적화 결과, 수요 및 공급 측면의 변동성을 고려하지 않는 EOQ 방식에 비해 재고관리 비용을 평균 97.28% 감소시킬 수 있었다. 이후, 프로젝트 발생 주기, 원자재 조달기간, 단위 품절비용 등 세 가지 영향 요인을 설정한 후 세 가지 재고관리 정책에 대한 성능 비교 실험을 수행하였다. 실험 결과, 실시간 또는 매일 재고수준을 파악하여 주문 시점을 결정하는 정량 발주 방식과 (s, S) 발주 방식의 재고관리 비용이 고정 주문주기를 갖는 정기 발주 방식보다 각각 30.6%와 27.9% 낮게 나타났다. 또한, 재고관리 비용은 프로젝트 발생 주기를 제외한 원자재 조달기간과 단위 품절 비용 요인에 의해 영향을 받는 것으로 나타났지만, 그 차이는 2.17%와 2.09%로 수요 및 공급의 변동성 대응을 위한 모수 최적화 과정으로 인해 크지 않았다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2545-2552
• /
• 2018

$SF_6$ has been widely used in high voltage power equipment, such as gas insulated switchgear (GIS) and gas insulated transmission line (GIL), because of its excellent insulation and arc extinguishing performance. However, $SF_6$ faces two environmental problems: greenhouse effect and high liquefaction temperature. Therefore, to find the $SF_6$ substitute gases has become a research hotspot in recent years. In this paper, the liquefaction characteristics of $SF_6$ substitute gases were studied. Peng-Robinson equation of state with the van der Waals mixing rule (PR-vdW model) was used to calculate the dew point temperature of the binary gas mixtures, with $SF_6$, $C_3F_8$, $c-C_4F_8$, $CF_3I$ or $C_4F_7N$ as the insulating gas and $N_2$ or $CO_2$ as the buffer gas. The sequence of the dew point temperatures of the binary gas mixtures under the same pressure and composition ratio was obtained. $SF_6/N_2$ < $SF_6/CO_2$ < $C_3F_8/N_2$ < $C_3F_8/CO_2$ < $CF_3I/N_2$ < $CF_3I/CO_2$ < $c-C_4F_8/N_2$ < $C_4F_7N/N_2$ < $c-C_4F_8/CO_2$ < $C_4F_7N/CO_2$. $SF_6/N_2$ gas mixture showed the best temperature adaptability and $C_4F_7N/CO_2$ gas mixture showed the worst temperature adaptability. Furthermore, the dew point temperatures of the $SF_6$ substitute gases at different pressures and the upper limits of the insulating gas mole fraction at $-30^{\circ}C$, $-20^{\circ}C$ and $-10^{\circ}C$ were obtained. The results would supply sufficient data support for GIS/GIL operators and researchers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1733-1735
• /
• 2002

The important parameters deciding the fluctuation of laser beam are smoothing capacitor, frequency and the characteristics of laser resonator. In this thesis, we control the fluctuation of $CO_2$ laser in realtime by changing Duty-Ratio of IGBT and switching frequency with fixed the smoothing capacitor to improve the fluctuation of laser beam. We detect the light on laser resonator using a CdS photo sensor to improve ripple factor of laser beam and feedback fluctuated signals refined by a band pass filter into the control circuit to stabilize fluctuation actively. There is much to be desired in the realtime controlling technique of the light on laser discharge tube in electrical signal. We propose switching control technique with microprocessor and photo sensing technique by controlling switch devices optimum operation and feedback signals detected by a photo sensor into the laser power supply in order to improve ripple factor of the $CO_2$ laser beam.

• 한국대기환경학회지
• /
• 제26권6호
• /
• pp.683-689
• /
• 2010

Reforming of methane with carbon dioxide has been carried out using a bipolar pulse driven elongated arc reactor operating at atmospheric pressure and non-equilibrium regime. This plasma reactor is driven by two kinds of power supply, characterized by different voltage-current characteristics under the same operating power and frequency. Varying the $CO_2/CH_4$ ratio and the discharge power, the conversion rate, yield, and reforming efficiency for the two power supplies are investigated in conjunction with the static and dynamic behaviors of voltage and current. It is found that not only the values of voltage and current but also their shapes give an influence on the reforming performances. Finally, a better electrical operation regime for the efficient plasma reforming is proposed based on the relationship between the voltage-current characteristics and the reforming performance.

• 설비공학논문집
• /
• 제20권8호
• /
• pp.517-525
• /
• 2008

In order to study the heat transfer and pressure drop of an internal heat exchanger for $CO_2$ heat pump under cooling condition, the experiment and numerical analysis were performed. Four kinds of internal heat exchangers with a coaxial tube type and a micro-channel tube type were used. The experimental apparatus consisted of a test section, a power supply, a heater, a chiller, a mass flow meter, a pump and a measurement system. The section-by-section method and Hardy-Cross method were used for the numerical analysis. The effects of the internal heat exchanger refrigerant flow rate, the length of the internal heat exchanger, the operating condition of the gas-cooler, the evaporator and the type of the internal heat exchangers were investigated. With increasing of the flow rate, the heat transfer rate increased about 25%. The heat transfer rate of the micro-channel tube type was higher about 100% than that of the coaxial tube type. With increasing of the length of the internal heat exchanger, the heat transfer rate increased about $20{\sim}50%$. The pressure drop of the low-side tube was larger compared with that of the high-side tube.

• 폴리머
• /
• 제33권3호
• /
• pp.237-242
• /
• 2009

알렌드로네이트의 생체이용률을 높이고 경구복용시 발생하는 부작용을 해소하고자 경피약물전달시스템에 전기이온영동법, microneedle 등을 적용하여 in-vitro 시험 후 약물전달량을 HPLC-Flu를 이용하여 조사하였다. 전기이온영동시험을 위해 사용된 약물 패취는 UV중합법으로 합성하였으며, 이때 패취에 함유된 알렌드로네이트의 량은 $5.0\;mg/cm^3$이었다. 0.25, $0.50\;mA/cm^2$의 전류를 인가한 경우, 약물전달량은 각각 $0.80{\pm}0.03$와 $2.00{\pm}0.02{\mu}g$이었다. microneedle로 전처리 후의 전달량은 각각 $70.65{\pm}0.37$와 $162.23{\pm}0.40{\mu}g$으로 증가했다. 경피약물전달용 알렌드로네이트 패취의 생체적 합성 평가는 ISO 10993에 따라 시험하였다.