• Land and Housing Review
• /
• v.3 no.4
• /
• pp.399-406
• /
• 2012

One-third of total energy and 50% of $CO_2$ emissions arise from construction phase. Because of this global amount of energy consumption and $CO_2$ emission, we must do our best to solve this problem. But our existing ways of meeting this problem has focused on the energy consumption saving of the construction and dwelling stage. On the other hand, we has been treated too lightly for handling the $CO_2$ emissions problem during the maintenance management and the demolition process so far,. In this paper, we quantitatively predicted and evaluated the environmental load in each construction step during all life cycle. And, we developed the environmental load assessment program for each construction step. And we proposed the reliable decision support model for objective and reliable environmental load assessment and reduction. This result must help the development of construction technology and low carbon & green growth.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.29-37
• /
• 2009

As the level of the ambient air quality becomes increasingly important, transportation management strategies tend to incorporate air quality standards into their measure of effectiveness. However, previous research efforts did not pay much attention to the empirical relationships between traffic volume and air quality, potentially due to the lack of data. With this background, this study investigates the relationship using Seoul's existing traffic and air quality monitoring data collected over the period of three years, from 2005 through 2007. In particular, those paired monitoring sites with a distance of less than one kilometer apart were utilized, targeting the emissions of CO, NO, $NO_2$, and $PM_{10}$. As a result, in general the data of two monitoring systems exhibited lower correlations, $NO_2$ showing a relatively higher correlation with traffic volumes than other emissions. In addition, it was found that the degree of correlation can be higher for the data obtained over the morning time period, 6am-9am, and the day after rainy days.

• Journal of Korea Trade
• /
• v.25 no.2
• /
• pp.58-74
• /
• 2021

Purpose - This paper research on the embodied carbon emission in Sino-Korea trade. It calculates and analyzes the carbon emission coefficient and specific carbon emissions in Sino-Korea trade from 2005 to 2014. Design/methodology - This paper conducted an empirical analysis for embodied carbon emission in Sino-Korea trade during the years 2005-2014, using a multi-region input-output model. First, direct and complete CO2 emission coefficient of the two countries were calculated and compared. On this basis, combined with the world input-output table, the annual import and export volume and sector volume of embodied carbon emission are determined. Then through the comparative analysis of the empirical results, the reasons for the carbon imbalance in Sino-Korea trade are clarified, and the corresponding suggestions are put forward according to the environmental protection policies being implemented by the two countries. Findings - The results show that South Korea is in the state of net trade export and net embodied carbon import. The carbon emission coefficient of most sectors in South Korea is lower than that of China. However, the reduction of carbon emission coefficient in China is significantly faster than that in South Korea in this decade. The change of Korea's complete CO2 emission coefficient shows that policy factors have a great impact on environmental protection. The proportion of intra industry trade between China and South Korea is relatively large and concentrated in mechanical and electrical products, chemical products, etc. These sectors generally have large carbon emissions, which need to be noticed by both countries. Originality/value - To the best knowledge of the authors, this study is the first attempt to research the embodied carbon emission of ten consecutive years in Sino-Korea Trade. In addition, In this paper, some mathematical methods are used to overcome the error problem caused by different statistical caliber in different databases. Finally, the accurate measurement of carbon level in bilateral trade will provide some reference for trade development and environmental protection.

• Korean Journal of Environment and Ecology
• /
• v.16 no.2
• /
• pp.172-178
• /
• 2002

This study quantified $CO_2$, SO$_2$and NO$_2$uptake by vegetation for the Namsan Nature Park in Seoul, and explored values for the park to contribute to atmospheric purification. Broad-leaved forest accounted for about 54% of total forest area, and tree-age structure was dominated by a young, growing tree population. Tree density and basal area averaged 17.5 trees/100$m^2$ and 2,580$\textrm{cm}^2$/100$m^2$, respectively. Atmospheric purification per unit area by forest type and age class was greater in older age classes, associated with changes in basal area, and tended to be greater in broad-leaved or mixed forest than in coniferous forest for the same age classes. Mean $CO_2$storage per unit area for all the forest types and age classes was 293.8 t/ha and economic value of the $CO_2$storage was ￦ 147millions/ha. Annual uptake averaged 24.6t/ha/yr for $CO_2$, 17.1 kg/ha/yr for SO$_2$and 43.9 kg/ha/yr for NO$_2$, and economic value of the annual uptake was ￦ 13millions/ha/yr. Total forest area stored 72,100 t of $CO_2$, and annually sequestered 6,040 t/yr of $CO_2$, 4,200 kg/yr of SO$_2$and 10,770 kg/yr of NO$_2$. Economic value of atmospheric purification for the entire area amounted to approximately ￦ 36,100millions for the $CO_2$storage, and ￦ 3,100millions/yr for the annual $CO_2$, SO$_2$ and NO$_2$uptake. The park played an important role through annually offsetting $CO_2$emissions from fossil fuel consumption by 1,100 persons, SO$_2$emissions by 2,800 persons, and NO$_2$ emissions by 1,160 persons. The results from this study are expected to be useful not merely in informing the public of atmospheric purification values of urban nature parks, but in urging the necessity for replanting and management budgets.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.60-66
• /
• 2016

This study investigated the structure and combustion characteristics of four species, Timber Douglas-fir being used construction materials (finishes), Lauan, Cryptomeria japonica, Pinus densiflora trees in the area. In lookong into the ignition characteristics was a time range of ignition (TTI) appeared in the 21 s~32 s, especially Pinus densiflora TTI is ignited in a relatively rapid 601 s to 21 s than the other materials were destroyed in the 631 s. The maximum heat release rate and average heat release rate is Pinus densiflora > Lauan > Cryptomeria japonica > Douglas-fir showed a net. Barrel emissions are Lauan > Douglas-fir > Pinus densiflora > Cryptomeria japonica was in order. The total emissions was postponed Pinus densiflora $424.80m^2/m^2$, Lauan $185.93m^2/m^2$. Douglas-fir carbon emissions of 1460, showing 0.185 kg/kg CO maximum value from s $CO_2$ values show the maximum value to 15,986 kg/kg in 750 s stopped in the 3,090 s. Next, the study suggested methods to utilize as the basic data for evaluating the safety of the fire as a building material.

• International Journal of Automotive Technology
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2003

Wastes such as shredder dust of disposed vehicles can be decomposed into low calorific flammable gases by Pyrolysis gasification. A stationary electric Power generation using an internal combustion engine fuelled with the waste-pyrolysis gas is an effective way to ease both waste management and energy saving issues. The waste-pyrolysis gas mainly consists of H$_2$, CO, $CO_2$ and $N_2$. The composition and heating value of the gas generated depend on the conversion process and the property of the initial waste. This research analyzed the characteristics of the combustion and the exhaust emissions in a premixed charge spark ignition engine fuelled with several kinds of model gases, which were selected to simulate the pyrolysis-gases of automobile shredder dusts. The influences of the heating value and composition of the fuel were analyzed parametrically. Furthermore, optical analyses of the combustion flame were made to study the influence of the fuel's inert gas on the flame propagation.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.559-573
• /
• 2020

The purpose of this study analyzed the overview of corrugated cardboasrd manufacturing industry and then provide direction for improvement. The BREF (BAT reference document) is an important reference for licensees and officer, including the best available techniques for the industry and achievable environmental performance, technical characteristics, and economic information. In the corrugated cardboard manufacturing process, wastewater pollutants are generated throughout the production process, and water is used in the dissociation and aging process. Atmospheric emissions are mostly generated by steam production from boilers and incinerators for the dry process. SO₂, NOx, CO₂, CO, HCl, dust, VOC, and odor were common. In the EU-BREF (European union BAT reference documents) BAT for wastewater have taken up a relatively large proportion. Items of water pollutants in wastewater were common in COD, BOD, N, P, SS, and however EU-BREF had different pollutants such as AOX and salt compared to K-BREF. In order to improve the quality of the K-BREF, it is necessary to devise basic data research method and data acqusitiom method. Consideration should be given to additional environmental management techniques that reflect the emissions characteristics of the corrugated cardboard manufacturing process. In addition, further research is needed to develop methodologies for selecting BATs considering environmental and economic feasibility.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.1
• /
• pp.22-30
• /
• 2009

Energy environment has been changing rapidly such as the fluctuation of oil prices and the effect on UNFCCC. Oil price change affects Korea's economy heavily due to her poor natural resources and large dependence of consumed energy resources. Korea takes the 4th place of importing the crude oil and 9th place in $CO_2$ emissions with the 1st place of $CO_2$ emissions increasing rate. Considering the current statue of Korea including oil price change and UNFCCC, Korea will be expected to be the Annex I nation due to Korean energy environments and the quantity of $CO_2$ emission. Energy technology development is a crucial key to cope with Korea's national energy security and environments. In this study, we establish the framework, which allocates the relative weights of assessment criteria and sub-criteria, for assessing and selecting R&D programs of energy technologies strategically. We integrated fuzzy theory and analytic hierarchy process (AHP) approach since the fuzzy AHP approach reflects the vagueness of human thoughts and perception effectively as making pairwise comparisons of criteria and alternatives. The fundamental data of this research results will support R&D planning phase for policy-makers and the production of well focused R&D outcomes.

• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.501-508
• /
• 2012

Reducing carbon dioxide ($CO_2$) exhaust has become a major issue for society in the last few years, especially since the initial release of the Kyoto Protocol in 1997 that strictly limited the emissions of greenhouse gas for each country. One of the primary sectors affecting the levels of atmospheric greenhouse gases is agriculture where $CO_2$ is not only consumed by plants but also produced from various types of soil and agricultural ecosystems including greenhouses. In greenhouse cultivation, $CO_2$ concentration plays an essential role in the photosynthesis process of crops. Optimum control of greenhouse $CO_2$ enrichment based on accurate monitoring of the added $CO_2$ can improve profitability through efficient crop production and reduce environmental impact, compared to traditional management practices. In this study, a sensor-based control system that could estimate the required $CO_2$ concentration considering emission from soil for cucumber greenhouses was developed and evaluated. The relative profitability index (RPI) was defined by the ratio of growth rate to supplied $CO_2$. RPI for a greenhouse controlled at lower set point of $CO_2$ concentration (500 ${\mu}mol{\cdot}mol^{-1}$) was greater than that of greenhouse at higher set point (800 ${\mu}mol{\cdot}mol^{-1}$). Evaluation tests to optimize $CO_2$ enrichment concluded that the developed control system would be applicable not only to minimize over-exhaust of $CO_2$ but also to maintain the crop profitability.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.87-91
• /
• 2015

As negative effects of climate change have been visualized and its direct damages to economy have been realized, the global efforts to respond to climate change by reducing greenhouse gas emission were accelerated. Korea's Carbon Footprint Labeling gets a lot of attention as one of the effective methods to contribute to national GHG reduction goal, and for enterprises to show customers how much effort the company put into global warming prevention. Consumers' interest on low-carbon products has been increasing. This study uses Life Cycle Assessment method to calculate the amount of carbon emission of dishwashing detergent, LG Household & Healthcare, which reduced carbon emissions by using raw materials that has relatively lower environment load. Life Cycle Assessment Method is based on guidelines of Carbon Footprint Labeling, Ministry of Environment, and pre-manufacturing, manufacturing, and disposal phase are included while use phase of the product is excluded from assessment. In order to understand the effects of eco-design on carbon emissions, the dishwashing detergent's carbon emissions are compared before and after the change of main raw materials. The result shows the improvement from $0.47kgCO_2eq/kg$ to $0.38kgCO_2eq/kg$ per product, and this means the main raw materials' carbon emissions could be reduced by around 9.4%, which is equivalent to 916tons of GHG emissions per year.