• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.7-12
• /
• 2001

Real time monitoring has become critical as the use of laser welding increases. Plasma and spatter are measured and used as the signal for estimating weld quality. The estimating algorithm was made using the fuzzy pattern recognition with the area of data that is beyond the tolerance boundary. Also, an algorithm that detects the spatter and the localized defect was created in order to kd the partially produced pit and the sudden loss of weld penetration. These algorithms were used in quality monitoring of the $CO_2$ laser tailored blank weld. Statistical program that can display the laser weld quality result and the signal transition was made for the first stage of the remote control system.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.228-230
• /
• 2003

Recently, lots of joining methods of thin metal sheets are being developed in order to improve joint quality and productivity in manufacturing area. Current existing welding methods are continuously challenged as new materials and smaller thickness of metal sheets are required. In this study, laser plug brazing process was investigated as a new joining method of thin metal sheets. A CO2 laser system with automatic feeding of filler metal wire and flux was developed, and laser plug brazing experiments were conducted. The brazed joints were analyzed using various methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.104-110
• /
• 2001

The rapid prototyping and tooling technology has been developed. However, most commercial ones currently use resins or waxes as the raw materials. These days, the direct metal deposition methods are being investigated as new rapid prototyping and tooling technology. A fundamental study on rapid prototyping and tooling with wire welding technology using CO2 laser radiation was carried out in this paper. The main focus is to develop a simple commercial rapid prototyping and tooling system with the exiting laser welding technology as output and their microstructure, hardness and tensile strength are examined for the reliability. In addition, its advantages and disadvantages are discussed as a rapid prototyping and tooling system.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.354-356
• /
• 2007

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.85-87
• /
• 2005

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.100-102
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.439-442
• /
• 1989

$CO_2$ lasers are used in the various industrial fields since the development of $CO_2$ laser in 1964 It is because $CO_2$ laser is more efficient, more powerful than other lasers and $CO_2$ laser light of wavelength $10.6{\mu}m$ interacts with materials well. Thus $CO_2$ laser is used for industrial application such as cutting, punching, welding, surface treatment of metal and nonmetalic materials, isotope separation, etc. Already other research institutes including some universities have recognized the advantages and importance of the $CO_2$ laser, and studied it. However, its technology is in elementary state yet Therefore,we started this study to develop present $CO_2$ laser technology more highly and to fit it. The main purposes of this study are to acquire various technologies such as high voltage, high pressure glow discharge, vaccum and optical cavity design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1507-1512
• /
• 2010

In this study, the plasma induced by $CO_2$ laser lap welding of 6t Zn coated steel used for ship building was measured using photodiodes and a microphone. Then, the welding phenomenon with gap clearance of lap joint was compared with RMS-treated signal. Thus, we found that intensity of the RMS-treated signal increased with Zn vaporization; further, the presence of defects results in rapid variations with the RMS value as a function of lap-joint parameters. Besides, the FFT value of the raw signal with variations of changing welding parameters was calculated, and then the calculated FFT frequency value was set as the bandwidth of digital filter for a more accurate in-process monitoring. The RMS values were acquired by filtering the raw signal. By matching the weld beads and the calculated RMS values, we confirmed that there is a strong relationship between the signals and the defects.

• Proceedings of the KWS Conference
• /
• 1994.05a
• /
• pp.186-189
• /
• 1994

This paper proposes an expert system for the selection of the appropriate laser cutting variables from the available database. Optimum cutting conditions were searched and qualitative comments which are hard to choose as database variables were shown using the binary and fuzzy inference.

• Laser Solutions
• /
• v.17 no.2
• /
• pp.11-18
• /
• 2014

This research was conducted as a fundamental study to apply tailored blank welding technique into automotive production process. Specially we tried to apply the TWB technique to exhaust system. The materials used in this work were ferritic 439 stainless steel sheet with a thickness of 1.2mm and 0.8mm. Welding tests were conducted for BOP test and dissimilar thickness (0.8 to 1.2t) cases. Major process parameters were position of focus, travel speed, shielding gas and joint (gap) condition. As a result, there are nothing significant welding characteristic compare with TWB of carbon steel. Stainless steel shows the good weldability and mechanical properties (tensile, hardness and forming strength) also shows high level. Just problem is gap condition. However, also in this case, it shows not only good forming strength but also base metal fracture after tensile test. And to conclude, it is good opportunity to make lightweight design muffler using TB welding technique.