• Clean Technology
• /
• v.7 no.1
• /
• pp.51-63
• /
• 2001

In this study, PSA, known as the most economic process, was used to recover $CO_2$ from the power-plant flue gas. Activated carbon and zeolite molecular sieve 13X were used as adsorbent. Activated carbon has been deemed inadequated adsorbent for separating $CO_2$ from the flue gas. However, highly concentrated $CO_2$ could be obtained as a product on the activated carbon adsorbent using the new operating cycle modifying the rinse step. Also, the recovery of $CO_2$ was improved using double-layered adsorption column packed with the activated carbon and the zeolite 13X simultaneously. Adsorption column was filled with the activated carbon in the feed-end side, and the zeolite 13X in the product-end side. The recovery of $CO_2$ increased about 40% with only 25% zeolite, and increased 67% with 50% zeolite at the experimental conditions of 13% $CO_2$ concentration, 10 SLPM flow rate and 2.2 atm adsorption pressure.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.172.1-172.1
• /
• 2011

본 연구에서는 매립지에서 발생하는 주요한 가스인 $CO_2$(47~55%)와 $CH_4$(47~55%)가스를 분리하기 위하여 여러 $CO_2$ capture 방법 중 Zeolite를 사용한 흡착법을 이용하였다. 국내에서 시판되고 있는 powder형 Zeolite 13X에 Inorganic binder와 organic binder를 최적의 비율로 혼합한 후 증류수를 이용하여 Pellet type 흡착제를 제조하였다. 또한 최종적으로 $CO_2$의 흡착능을 높이기 위하여 양이온(1M의 KCl, NaCl, $CaCl_2$, $LiCl_2$)으로 이온교환을 하였다. 매립지 모사가스($CO_2$:40%, $CH_4$:60%)를 이용하여 실시간 분석기(Delta1600S)를 이용 두 가스의 분리와 $CO_2$ 흡착성능(mg-CO2/g-흡착제)을 확인하였다. 개발된 흡착제(AjouEpl 13X)는 ICP, XRD, XRF, BET 분석으로 제올라이트의 구조와 성분을 분석하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2012

In this study, $CO_2$ adsorbent was developed for removing low concentration of $CO_2$ in multiple-use facilities. The efficiency of the adsorbent which was improved selective $CO_2$ adsorption capabilities was evaluated. The pellet type adsorbent was modified from a commercial zeolite with mixing LiOH, binder, additives, and $H_2O$. Column tests showed over 90 % of $CO_2$ was adsorbed within 400min. Chamber tests including batch and continuous types were performed for evaluating the adsorbent module. By batch tests, it was evaluated that about 92% of $CO_2$ was removed within 30 min. By continuous tests, 70% of $CO_2$ was removed within 30 min. It was analyzed that over 2,500 ppm of $CO_2$ was continuously removed as shown chamber tests. The reproducibility tests repeatedly performed for 15 days shows that over 1,000 ppm of $CO_2$ was continuously removed. Adsorption capacity of the developed adsorbent was 5.0mmol $CO_2/g$ adsorbent which was analyzed by TGA. It was estimated that the modified adsorbent was applicable to low $CO_2$ concentration and low temperature of indoor environment.

• Membrane and Water Treatment
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2023

This study explored the feasibility of calcium-rich food waste, Mactra veneriformis shells (MVS), as an adsorbent for phosphate removal, and its removal efficiency was enhanced by the thermal activation process. The CaCO3 in MVS was converted to CaO by thermal activation (>800 ℃), which is more favorable for adsorbing phosphate. Thermal activation did not noticeably influence the specific surface area of MVS. The MVS thermally activated at 800 ℃ (MVS-800), showed the highest phosphate adsorption capacity, was used for further adsorption experiments, including kinetics, equilibrium isotherms, and thermodynamic adsorption. The effects of environmental factors, including pH, competing anions, and adsorbent dosage, were also studied. Phosphate adsorption by MVS-800 reached equilibrium within 48h, and the kinetic adsorption data were well explained by the pseudo-first-order model. The Langmuir model was a better fit for phosphate adsorption by MVS-800 than the Freundlich model, and the maximum adsorption capacity of MVS-800 obtained via the Langmuir model was 188.86 mg/g. Phosphate adsorption is an endothermic and involuntary process. As the pH increased, the phosphate adsorption decreased, and a sharp decrease was observed between pH 7 and 9. The presence of anions had a negative impact on phosphate removal, and their impact followed the decreasing order CO₃^2- > SO₄²- > NO₃^- > Cl^-. The increase in adsorbent dosage increased phosphate removal percentage, and 6.67 g/L of MVS-800 dose achieved 99.9% of phosphate removal. It can be concluded that the thermally treated MVS-800 can be used as an effective adsorbent for removing phosphate.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1192-1203
• /
• 1996

$Al_2O_3-TiO_2$ composite oxide adsorbents which could be applied in high-temperature water were prepared by hydrolysis of aluminum and titanium alkoxide. The prepared adsorbents were calcined at $600{\sim}1400^{\circ}C$ and in order to investigate the various properties - the transition of crystals, thermal properties, and specific surface area, X-ray diffractometry, thermal analysis, FT-IR, SEM and BET method were employed. And the $Co^{2+}$ adsorption characteristics of these adsorbents in high-temperature water were investigated by batch adsorption experiment in a stirred autoclave. Since the adsorption of $Co^{2+}$ on the $Al_2O_3-TiO_2$ adsorbents was irreversible endothermic in the temperature range of $150{\sim}250^{\circ}C$, the standard enthalpy changes of 26, 43, and 80 mol% of $TiO_2$ on $Al_2O_3$ were in the range of $16.5{\sim}26.0kJ{\cdot}mol^{-1}$. The adsorbent of 26 mol% of $TiO_2$ on $Al_2O_3$ which was calcined at $600^{\circ}C$ for 2 hours showed the adsorption amount of $0.1674meq{\cdot}g^{-1}$ in the high temperature water at $250^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.9
• /
• pp.1061-1066
• /
• 1999

The adsorption of CO on W(111) surface in the range of adsorption temperature between 300 K and 1000 K has been studied using AES, LEED, and TDS in an UHV system. After CO saturation at 300 K, four desorption peaks are observed at temperatures (K) of about 400, 850, 1000, and 1100 in thermal desorption spectra, called as α, β1, β2, and β3 state, respectively. The state was attributed to molecular species of CO, which is well known. Because the CO in βstates (especially the β3 state) is still debated as to whether it is dissociative or non-dissociative, the β3 state is mainly discussed. By using the variation method of heating rate in the thermal desorption spectrometry, the desorption energy and pre-exponential factor for the β3 state are evaluated to be 280 kJ/mol and 1.5×10 12 s-1 , respectively. A lateral interaction energy of 5.7 kJ/mol can also be estimated by Bragg-Williams approximation. To interpret the thermal desorption spectra for the β3 state, moreover, those for the model of a first order and a second order desorption are simulated using quasi-chemical approximation. In this study, a model of lying-down CO species is proposed for the β3 state of CO adsorption.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.159-165
• /
• 1999

The adsorption and separation behaviors of transition metal ions using a merrifield resin bound 1,12-diaza-3,4:9,10-dibenzo-5,8-dioxacyclopentadecane (NTOE) and 1,12,15-triaza-3,4:9,10-dibenzo-5,8-dioxacycloheptadecane(NDOE) were investigated in aqueous solution. The orders of adsorption degree(E) and distribution ratio(D) of transition metal ions were Cu(II)$t_R$) of metal ions were affected by adsorption degree(E) and distribution ratio(D). This results showed good separation efficiency of Ag(I) from mixed metal solution.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.573-581
• /
• 2007

The present study deals with removal of $CO_2$ using various mesoporous materials impregnated with MEA (monoethanolamine). The mesoporous materials such as MCM-41, MCM-48 and SBA-15 were synthesised and then impregnated with 30, 50 and 70 wt% of MEA, respectively. XRD, FT-IR and SEM were used to evaluate the characterization of those. From the adsorption/desorption experiments for various materials, the adsorption capacity of these materials were found in the order of MCM-41> MCM-48> SBA-15. MCM-41 impregnated with 50 wt% of MEA showed the maximum adsorption capacity of $57.1mg-CO_2/gr-sorbent$ at $40^{\circ}C$. It is nearly 8 times higher than MCM-41 without impregnation of MEA. In the multiple cycle test of 20 times, MCM-41 impregnated with 50 wt% of MEA showed a constant adsorption capacity.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.179-185
• /
• 2009

In this research, the removal capacity of Cr(VI) by the reused powdered wastes (RPW) containing aluminium oxides was studied. As a pre-treatment process for the preparation of calcined wastes, calcination was conducted at $550^{\circ}C$ to remove organic fraction in the raw wastes. In order to study the adsorption trend of Cr(VI) ions from aqueous solutions, the pH-edge adsorption, adsorption kinetic and adsorption isotherm were investigated using a batch reactor in the presence of four different background electrolytes($NO_3\;^-,\;CO_3\;^{2-},\;SO_4\;^{2-},\;PO_4\;^{3-}$). Cr(VI) adsorption was greatly reduced in the presence of $SO_4\;^{2-}$ and $PO_4\;^{3-}$ over the entire pH range. Meanwhile the inhibition effect by $NO_3\;^-$ and $CO_3\;^{2-}$ was relatively lower than that by $SO_4\;^{2-}$ and $PO_4\;^{3-}$. Cr(VI) adsorption was maximum around pH 4.5 in the presence of $NO_3\;^-$ and $CO_3\;^{2-}$. As the concentration of background electrolytes increased, Cr(VI) adsorption decreased. This result mightly suggests that adsorption between the surface of RPW and Cr(VI) occurs through outer-sphere complex. Cr(VI) adsorption onto the RPW was well described by second-order kinetics. From the Langmuir isotherm at initial pH 3, the maximum adsorbed amount of Cr(VI) onto the RPW was 11.1, 10, 3.3, 5 mg/g in the presence of $NO_3\;^-,\;CO_3\;^{2-},\;SO_4\;^{2-}$, and $PO_4\;^{3-}$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.9
• /
• pp.1314-1320
• /
• 2004

The adsorption and configuration of CO molecules adsorbed on W (110) and W (100) surfaces have been calculated by the atomic superposition and electron delocalization molecular orbital (ASED-MO) method. Referred to as the ASED-MO method, it has been used in the present study to calculate the geometries, binding energies, vibrational frequencies, orbital energies, reduced overlap population (ROP), and charges. From these results adsorption properties of ${\alpha}$-state and ${\beta}$-state were deduced. The calculated binding energies are in good agreement with the experimental result. On the W (110), the calculated average binding energies are 2.56 eV for the end-on configuration and 3.20 eV for the lying-down configuration. Calculated vibrational frequency is 1927 $cm^{-1}$ at a 1-fold site and 1161 $cm^{-1}$ at a long-bridge (2) site. These results are in reasonable agreement with experimental values. On the W(100) surface, calculated average binding energies of the end-on and the lying-down are 2.54 eV and 4.02 eV respectively. The differences for binding energy and configuration on the surfaces are explained on the basis of surface-atom coordination and atom-atom spacing. In the favored lyingdown CO configuration on the W(110) and W(100) surfaces, 4 ${\sigma}$ and 1 ${\pi}$ donation interactions, coupled with the familiar 5 ${\sigma}$ donation to the surfaces and back-donations to the CO 2 ${\pi}^{\ast}$ orbital, are responsible for adsorption to the surface.