• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.51-56
• /
• 2019

$H_2S$ is a detrimental impurity that must be removed for upgrading biogas to biomethane. This study investigates an economic method to mitigate $H_2S$ content, combining scrubbing and aeration. The desulfurization experiments were performed in a laboratory apparatus using EDTA-Fe or landfill leachate as the catalyst and metered mixture of 50-52% (v/v) $CH_4$, 32-33% (v/v) $CO_2$ and 500-1,000 ppmv $H_2S$ balanced by $N_2$ using the C city landfill gas. Dissolved iron concentration in the liquid medium significantly affected the oxidation efficiency of sulfide. Iron components in landfill leachate, which would be available in a biogas/landfill gas utilization facility, was compatible with an external iron chelate. More than 70% of $H_2S$ was removed in a contact time of 9 seconds at iron levels at or over 28 mM. The scrubbing-aeration process would be a feasible and easy-to-operate technology for biogas purification.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.100-105
• /
• 2006

The photocatalytic activity of phenol degradation was investigated with the variation of operating parameters in $UV/TiO_2$ honeycomb reactor. In the comparison of phenol degradation rates among various $TiO_2$, Ishihara (STS-02)-coated honeycomb exhibited a slightly higher photocatalytic activity than Degussa P25-coated honeycomb. On the other hand, honeycomb coated by alcohol-mixed $TiO_2$ (N Co.) did not exhibit any photocatalytic activity on phenol degradation. With the increase of Degussa P25 coating amounts, the honeycomb reactor exhibited the gradual increase of phenol degradation rates. The degradation rate of phenol over $UV/TiO_2$ (Degussa P25) honeycomb reactor was asymptotically increased up to 500 mL/min, subsequently followed by a slight decrease as the recirculation rate (100~700 mL/min) was increased. UV absorption at 269 nm was high due to partial degradation of phenol at initial reaction time because the honeycomb surface was pre-adsorbed by phenol prior to UV irradiation.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.808-818
• /
• 1994

Effects of ceria additive on the activity and thermal aging behavior of supported Ru catalysts were investigated using Ru/${\gamma}$-$Al_2O_3$and Ru/$CeO_2$-${\gamma}$-$Al_2O_3$. The catalysts were characterized by $^{129}Xe$-NMR and $H_2$ chemisorption. The cataltic activity for conversion of CO, HC and $NO_x$ was measured using simulated automobile engine exhausts under lean, rich and stoichiometric conditions. For both fresh and aged catalysts, Ru/$CeO_2$-${\gamma}$-$Al_2O_3$ was more active than Ru/${\gamma}$-$Al_2O_3$ for all three pollutants. Results of $^{129}Xe$-NMR and $H_2$ chemisorption indicated that sintering of Ru particles occurred to the same extent for both catalysts during the thermal aging process. After thermal aging at 673K, however, the catalytic activity of the aged Ru/$CeO_2$-${\gamma}$-$Al_2O_3$ was substantially higher than that of the fresh one, while the activity of Ru/${\gamma}$-$Al_2O_3$ decreased after the thermal aging. This finding may suggest new active sites were created during the thermal aging, probably in the vicinity of the interface between Ru and Ce. For more quantitative investigation of the effect of a cation such as Ce on the thermal aging of Ru metal particles, Ru catalysts supported on cation-exchanged Y-zeolites were used as the model catalysts. The results indicated that when Ba, Ca, La, Y or Ce was used for the cation exchange, the exchanged cation did not affect the thermal aging behavior of Ru in Y-zeolite, as evidenced by $^{129}Xe$-NMR and EXAFS.

• Journal of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.60-66
• /
• 1977

In the addition condensation reaction of m-phenylenediamine(MPD) and resorcinol (RES) with formaldehyde, the suspension polymerization in liquid paraffin was performed and the bead polymers were obtained with good results. The polymers were treated with dilute aqueous sodium hydroxide solutions in order to improve the adsorption capacity to the metallic ions and the adsorptivity to the several metallic ions, such as $Cd^{2+},\;Pb^{2+},\;Al^{3+},\;Mg^{2+},\;Co^{2+},\;and\;Hg^{2+}$ of the alkali-treated and untreated polymers were tested. These MPD-RES-F type resins showed better adsorption capacity to the heavy metallic ions such as $Cd^{2+}\;and\;Hg^{2+}$ than the light metallic ions such as $Pb^{2+},\;Al^{3+}\;and\;Mg^{2+}$, and the treatment of the resins with about 20 percent aqueous sodium hydroxide solution showed significant improvement of the adsorption capacity to the metallic ions in all cases.

• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.327-334
• /
• 2002

Fine particles of $SnO_2$ were fabricated by the sol-gel powder processing using tine(II) chloride dihydrate($SnCl_2{\cdot}2H_2O$) and ethanol($C_2H_5OH$) as raw materials. The powders were investigated about the properties and electrical sensing. Gel powders were fabricated by drying of sol at $120^{\circ}C$ after aging 72hrs and 168hrs. The amount of $SnO_2$ phase was increased below $600^{\circ}C$ due to the elimination of volatile components, and the $SnO_2$ phase was almost completed by the heat treatment at $700^{\circ}C$ for 30min. The grain sizes were about 30nm below $700^{\circ}C$, and it showed the narrow distribution of the grain sizes. The specimens to measure electrical properties were fabricated by the thick film screen printing technique on the alumina substrates. The conductance of $SnO_2$ was showed the intrinsic behaviour of semiconducting ceramics above at $450^{\circ}C$. The constant conductance was observed in the temperature range of $200{\sim}450^{\circ}C$. The sensing properties of response time, recovery, and sensitivity of CO were improved with aging time.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.1
• /
• pp.57-62
• /
• 2008

No matter how small amount of heavy metals it may be cause skin allergies through percutaneous adsorption when existing in cosmetic products as impurities. In order to develop a highly sensitive method for simultaneous determination of $Pb^{2+},\;Fe^{2+},\;Cu^{2+},\;Ni^{2+},\;Zn^{2+},\;Co^{2+},\;Cd^{2+},\;and\;Mn^{2+}$ in coloring agents and cosmetic products with rapidity and accuracy, we carried out the determination on ion chromatography. All of these metals are well separated through a bifunctional ion-exchange column(IonPac CS5A) and detected by post-column reaction and spectrophotometric detection. The calibration graphs are linear($r^2>0.999$) in the range $0.1{\sim}1000{\mu}g/mL$. Detection limits for 200 ${\mu}L$ of sample solution are at the level of ${\mu}g/L$, which is sufficient for judging whether the product is safe or not. The relative standard deviations(RSDs) of the retention time and the peak area are less than 0.21 and 1.24%, respectively. The recovery rates are $97{\sim}104%$. The new method was applied to analyze the amount of heavy metals which were contained in 22 cosmetic products and 11 coloring agents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.371.1-371.1
• /
• 2016

다양한 물질계의 2차원 나노구조는 그래핀과 함께 그 고유특성으로 최근 광전소자, 전자소자, 센서, 에너지 생성 및 저장과 수소에너지 생성 등의 응용으로 매우 많은 관심을 받고 있다. 특히 층상이중수산화물 (layered-double hydroxide; LDH) 2차원 나노구조는 생성의 용이성과 층상 내 금속 이온의 교환을 통한 특성의 자유로운 제어가 가능하므로 많은 관심을 받고 있다. 층상이중수산화물 화합물은 [Zn(1-x) MIII(x)(OH)2][$An-x/n{\cdot}mH2O$] (MIII = Al, Cr, Ga; An- = CO32-, Cl-, NO3-, CH3COO-) 구조로써, Brucite-type 구조 내에서 3가 양이온의 상태에 따라서 다양한 특성을 제어할 수 있는 장점이 있다. 이러한 장점으로 인해 층상이중수산화물 화합물은 촉매나, 에너지 저장, 음이온 교환 및 흡착, 화학적 촉매, 바이오 소자 등에 응용이 연구되고 있으며, 다양한 금속 산화물을 제조하기 위한 중간자 precursor로써도 연구되고 있다. 하지만, 이러한 대부분의 연구들을 통한 결과물들이 분말 및 수용액 상태로 남게 되며, 이러한 화합물의 특성을 제어하기 어려운 문제점이 있다. 더욱이 이러한 나노구조물들을 다양한 소자로 응용하기 위해서는 상용의 실리콘이나 glass 등의 기판형태의 물질상에 성장시킬 수 있어야 하며, 그러한 기판 위에서의 형상 및 특성 제어가 용이해야 한다. 따라서 본 연구에서는 실리콘 기판을 적용한 Zn기반의 층상이중 수산화물 화합물을 성장하고, 하부물질의 조성제어를 통한 층상이중수산화물 화합물의 형상제어가 가능한 기술에 관한 연구를 보고하고자 한다. 이를 위한 하부물질의 조성은 Zn와 Al을 통해 이루어지며, 기형성된 Al2O3박막을 핵형성층으로 활용한다. 이러한 방법으로 형성된 층상이중수산화물 화합물에 대해 이차전자주사현미경, 투과전자현미경 및 X-ray회절기법을 통해 구조분석을 하고, Raman 및 광발광스펙트럼 분석을 통해 광학적 분석을 시행함으로써, 층상이중수산화물이 기판상에서 형성되는 메커니즘에 관한 규명을 시행하였다. 이러한 분석연구를 통해 핵형성층의 에칭 따라 실리콘 기판상에서 성장하는 층상이 중수산화물 화합물의 형상 및 조성이 제어되는 메커니즘을 구명하였다.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.142-147
• /
• 2007

In this study, mesoporous tin oxide was synthesized by sol-gel method using $C_{16}TMABr$ surfactant as a template in a basic condition. The optimum conditions for the synthesis of mesoporous $SnO_2$ were investigated and the obtained samples were characterized by XRD, nitrogen adsorption and TEM analysis. A mesoporous and nanostructured $SnO_2$ gas sensor with Au electrode and Pt heater has been fabricated on alumina substrate as one unit via a screen printing process. Sensing abilities of fabricated sensors were examined for CO and $CH_4$ gases, respectively, at $350^{\circ}C$ in the concentration range of 1~10,000 ppm. Influence of loading amount of palladium impregnated on $SnO_2$ was also tested in detection of those gases. High sensitivity to detecting gases and the fast response speed with stability were obtained with the mesoporous tin oxide sensor as compared to a non-porous one under the same detection conditions.

• Applied Biological Chemistry
• /
• v.39 no.6
• /
• pp.501-505
• /
• 1996

우리나라에서 오랫동안 적색 및 황색색소원으로 널리 사용하여 왔던 홍화(Carthamus tinctorius)로부터 전통적인 추출방법을 응용한 새로운 방법을 사용하여 적색소를 효과적으로 분리정제하였다. 홍화꽃잎을 물 및 메탄올로 처리하여 황색소를 제거한 다음 건조파쇄하여 0.5 M $Na_2CO_3$로 홍색소를 추출하고 0.5 M citrate 수용액으로 침전시킨 후 cellulose 흡착, Sephadex LH-20 관크로마토그라피로 분리정제하였다. 분리정제된 적색소는 $300^{\circ}C$에서 분해되었고 silica gel TLC 상에서 BAW(n-BuOH : HOAc : $H_2O$=4 : 1 : 5)로 전개하였을 때 $R_f$값이 0.56이었다. 에탄올 용액에 녹인 적색소의 UV/Vis 흡수스펙트럼은 519, 372, 311, 244 nm에서 최대 흡수피크를 나타내었고, IR 스펙트럼은 특히 $3400\;cm^1$ 넓은 영역에서 hydroxyl기에 의한 강한 흡수띠를 보여주었다. $^{1}H$ 및 $^{13}C$ NMR data로 부터 enolized ${\beta}-triketone$, p-hydroxycinnamoyl, methine 및 glucosyl moieties를 확인하였고 그 값을 제시하였다. 이상의 data를 문헌과 비교한 결과 분리한 홍화적색소의 화학구조는 $6-{\beta}-D-glucopyranosyl-2-[[3-{\beta}-D-glucopyranosyl-2,3,4-trihydroxy-5-[3#-(4@-hydroxyphenyl)-1#-oxo-2#-propenyl]-6-oxo-1,4-cyclohexadien-1-yl]methylene]-5,6-dihydroxy-4-[3#-(4@-hydroxyphenyl)-1#-oxo-2#-propenyl]-4-cyclohexene-1,3-dione$인 carthamin으로 확인하였다.

• Analytical Science and Technology
• /
• v.25 no.2
• /
• pp.91-101
• /
• 2012

A list of volatile fatty acids (VFA) including propionic acid, butyric acid, isovaleric acid, valeric acid, etc. is well known for offensive odorants. The analysis of odorant VFA is a highly delicate task due to high reactivity and unstable recovery rate. At present, analytical methods of VFA are recommended to include alkali impregnation filter method and alkali absorption method by the malodor prevention law of the Korea Ministry of Environment (KMOE). In this review, a survey has been made to explore various approaches available for the analysis of VFA to include both official methods of the KMOE and others. In light of the unreliability of those established analytical methods, it is highly desirable to develop some substituting methods for VFA. Among such options, one may consider such option as sorbent tube (ST) sampling and cryogenic trapping-thermal desorption technique. Moreover, procedures used for standard preparation, sampling steps, and instrumental detection stage are also evaluated. Application of container sampling (like Tedlar bag) is however not recommendable due to significant (sorptive) loss in sampling and in storage stage. In the detection stage, the use of GC/MS is recommendable to replace GC/FID due to the presence of diverse interfering substances. Thus, it is essential to properly establish the basic quality assurance (QA) for VFA analysis in air.