• Proceedings of the KWS Conference
• /
• 1995.04a
• /
• pp.137-138
• /
• 1995

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.128-137
• /
• 1999

Recently the pelionnance of CO2 arc welding machine has been advanced significantly through the adoption of i invelter circuit topology. which made it possible to improve welding perfonnances such as spatter generation and bead s state. But the conventional inverter arc welding machine generates constant output voltage which cause much spatter g generation dUling short-circuit and arc start time because it is unable to control output current instantaneously. So this p paper representes wavefCnm controlled inverter arc welding machine which control the wavefonn of welding current and t thus to suppress the spatter generation. And the system designed in this paper is the digital controller using single chip m microprocessor of 80C196KC. As a result of perfonnance test for this system, the spatter generation is reduced and s shOlt-circuit time period is stabilized compared to conventional one. And more by using switched mode rectifier for A AC/DC power convelter. unity power factor is maintained and low order halmonic spectrum is supressed.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.30-30
• /
• 2009

GTA 용접에서 용입, 용접부의 크기와 형상이 형성되는 아크 물리학적 현상을 이해함에 있어서 에너지 분포특성은 매우 중요한 인자이다. GTA 용접에서 아크 길이의 변화와 사용된 실드 가스 종류에 따라 음극인 텅스텐 전극 팁의 아크 루트 직경에 큰 변화를 주며, 양극인 모재 쪽의 에너지 분포에 영향을 미치며 된다. 기존의 연구자들은 저전류나 중전류 영역의 GTA 용접에서 텅스텐 전극의 선단각과 용입 형태와 의 관계를 plasma 기류 등에 의해 고찰하거나, 최대 아크압력에 미치는 전극형상의 영향에 대하여 연구하였다. 용접부에 작용하는 아크 압력의 분포는 결국 운동 에너지의 분포이다. 기존의 연구자들에 비하여 보다 간편한 실험을 통하여 양극 모재위의 아크 압력에 의한 에너지 분포특성을 규명하는 연구가 필요하다. 본 연구의 목적은 GTA 용접의 용접전류 100A~200A 영역에서 아크 길이 변화와 Ar 가스에 $H_2$ 혼합에 따른 측정된 아크 압력으로부터 기존연구자들의 아크 물리학적 결과들을 활용하여 양극 모재 위에 작용하는 전류밀도 분포를 유도하는 것이다. GTA 용접에서 아크 길이의 변화와 Ar 가스에 $H_2$ 혼합은 아크 압력분포에 큰 영향을 미치며, 이에 따라 에너지 분포특성에 많은 영향을 미친다. 아크 길이가 증가함에 따라 Ar가스와 $H_2$ 혼합가스의 에너지 분포는 감소하였고, Ar가스에 $H_2$ 혼합에 의해 아크 에너지가 증가하여 용입형상에 큰 영향을 미칠 것으로 판단된다. 이에 대한 연구는 향후 GTA 용접 응용분야 확대 적용될 것이며, 아크 물리학 연구에 기초적이고 아주 중요한 과학적인 자료가 될 것으로 판단된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.92-98
• /
• 1998

With the development of semiconductor devices, adoption of microcontroller prevails in industrial area. But in are welding industry, there has not been much progress in adoption of microcontroller technology. Therefore, this paper shows the application of digital control technology to welding machine. This paper presents the design of microcontroller that is appropriate for three phase $CO_2$ gas metal are welding machine. By using microcontroller in $CO_2$ gas metal are welding machine, the overall cost can be reduced compared to analog comtroller. Also TMS370C850 microprocessor is used as overall microcontroller for the are welding machine.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.110-117
• /
• 2004

In automatic welding process using a robot, seam tracking is one of the important parts. Sensor for seam tracking is divided broadly into two categories as non contact sensor and contact sensor. The arc sensor is one of the non contact sensors, and it can be applied in weaving arc and rotating arc welding process. In such the arc sensors, rotating arc sensor can be applied to high speed welding over tens of Hz. The decrease of self regulation by high rotating speed causes to improve accuracy and response of sensor. In this study, fuzzy controller was used to track the seam for the $CO_2$ arc welding which had unstable arc. It could be shown that the rotating arc sensor was better than the weaving arc sensor.

• Proceedings of the KWS Conference
• /
• 2000.04a
• /
• pp.109-112
• /
• 2000

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.85-87
• /
• 2005

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.89-93
• /
• 1995

• Journal of Welding and Joining
• /
• v.8 no.3
• /
• pp.70-78
• /
• 1990

The harsh nature of welding environments makes welding a prime candidate for process automation. Among the variety of welding processes available, gas metal arc welding is one of the most frequently used methods, primarily because it is highly suited to a wide range of applications, and also to automation. Automatic seam tracking method is one of the most demanded techniques for automatic control of arc welding. In this study a seam tracking system has been developed by using the welding arc itself as a sensor. This paper described the principle and experimental result of the arc sensor system, as well as the development and application of the automatic CO_2$ welding for the horizontal fillet welding. A basic problem in horizontal fillet welding is the prevention of hanging bead formation such as undercut at the vertical plate and overlap at the horizontal plate. To produce the symmetric bead shape, the relationship of bead shape to welding parameters(welding velocity, weaving width, weaving speed, tip to workpiece distance) was also investigated.

• Proceedings of the KWS Conference
• /
• 1992.04a
• /
• pp.97-100
• /
• 1992