• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.36-43
• /
• 2015

The edible crab is among the rich resources that can be used as materials for food products, but living crabs and crabs marinated in soy sauce are the only widely utilized materials for food products. For seafood development, research is needed to promote the use of crabs in various products. In this study, the quality changes of fried rice prepared with crab meat, crab emulsion sauce and crab cooker effluent were investigated. The pH and acidity values did not show any significant difference at $-20^{\circ}C$. The acidity of the fried rice continuously increased during storage at 4 and $25^{\circ}C$. The VBN and TBA values of the fried rice stored at 4 and $25^{\circ}C$ were significantly higher than those of the fried rice stored at $-20^{\circ}C$ during the storage period. The viable cell count of the fried rice stored at $-20^{\circ}C$ changed little during the storage period while that of the fried rice stored at 4 and $25^{\circ}C$ rapidly increased over 2 weeks. For the fried rice stored at $-20^{\circ}C$, the overall quality did not show significant differences during the storage period. In conclusion, the best storage temperature for both quality and safety was found to be $-20^{\circ}C$. At such storage temperature, the quality of the stored instant rice using crab meat did not change, and through research the expanding possibilities of using crab materials were confirmed.

• Journal of Life Science
• /
• v.26 no.6
• /
• pp.698-704
• /
• 2016

The intracellular transport of organelles and protein complexes is mediated by kinesin superfamily proteins (KIFs). The first kinesin, kinesin 1, was identified as a molecular motor protein that moves various organelles and protein complexes along the microtubule rails in cells. Kinesin 1 is a tetramer of two heavy chains (KHCs, also called KIF5s) and two kinesin light chains (KLCs). KIF5s interact with many different proteins through their tail region, but their binding proteins have not yet been fully identified. To identify the interaction proteins for KIF5A, we performed yeast two-hybrid screening and found a specific interaction with ferritin heavy chain (Frt-h), which has a role in iron storage and detoxification. Frt-h bound to the amino acid residues between 800 and 940 of KIF5A and to other KIF5s in the yeast two-hybrid assay. The coiled-coil domain of Frt-h is essential for interaction with KIF5A. In addition, ferritin light chain (Frt-l) interacted with KIF5s in the yeast two-hybrid assay. In addition, these proteins showed specific interactions in the glutathione S-transferase (GST) pull-down assay. An antibody to KHC specifically co-immunoprecipitated Frt-h and Frt-l from mouse brain extracts. These results suggest the kinesin 1 motor protein may transport the ferritin complex in cells.

• The Korean Journal of Mycology
• /
• v.22 no.3
• /
• pp.222-228
• /
• 1994

In Lentinus edodes(oak mushroom) cultivation, commonly are logs and sawdusts of oak and some other broadleaved tree species used. Recently oak trees have been substantially diminished due to extensive logging. Thus, to develop comparable synthetic formula using other tree species for the cultivation of Lentinus edodes, we investigated the effect of various nutrients and pretreatment on L. edodes mycelial growth in coniferous sawdusts(i.e., Pine and Larch). We found that 1.5 hr pretreatment of sawdust with hot water and adding 10% rice bran, 3% charcoal, 0.02% $NH_4CI$ and 0.5-1% lignosulfornic acid were effective for the growth of L. edodes in pine sawdust media. In larch sawdust pretreatment with acetone for one hr and adding 20% rice bran, 3% charcoal and 0.02% $NH_4CI$ increased L. edodes mycelial growth. We also analyzed the components of oak and coniferous sawdusts and found oak has higher content of xylose and lower content of lignin, arabinose and mannose than conifers. Rice bran, compared with BITEL(HOKKEN Co.) known for better commercial substitute for rice bran, has lower content of xylose and galactose, but the similar C/N ratio.

• KSBB Journal
• /
• v.21 no.1 s.96
• /
• pp.72-78
• /
• 2006

This study was carried out to investigate the antimicrobial and antioxidative effects of mycelium cultural extract from mushroom. Mushroom mycelium was grown in a defined synthetic liquid medium and citrus extracts, and the culture extracts were examined for antioxidant and antibacterial activity. Myceliums of Phellinus linteus, Cordyceps militaris, Coriolus versicolor, Sparassic crispa, Agaricus blazei, lnonotus obliquus, Lentinus edodes, Hericium erinacium, Gonoderma lucidium in 10% citrus extract supplemented medium and synthesis medium were incubated in a shaking incubator (120 rpm, $24{\sim}30^{\circ}C$ ) for $7{\sim}15$ days. The antimicrobial activity of the culture fluid of mushroom mycelium grown in submerged liquid culture was tested against 12 microorganisms which were fish pathogens and common bacterial species. The culture extracts showed high activity against Vibrio sp. and had poor effect on Streptocouus sp., S. parauberis, S. iniae. The culture extracts obtained from the synthetic medium showed $30{\sim}93%$ of the 1,1-diphenyl-2-picrylhydrazyl radical scavenger activity, the culture extracts obtained from the citrus extracts medium exhibited antioxidant activity up to 55%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1610-1616
• /
• 2016

This study aimed to establish an optimal extraction process and high performance liquid chromatography-ultraviolet (HPLC-UV) analytical method for determination of 3,5-dicaffeoylquinic acid (3,5-DCQA) as a part of materials standardization for the development of a xanthine oxidase inhibitor as a health functional food. The quantitative determination method of 3,5-DCQA as a marker compound was optimized by HPLC analysis using a Luna RP-18 column, and the correlation coefficient for the calibration curve showed good linearity of more than 0.9999 using a gradient eluent of water (1% acetic acid) and methanol as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 320 nm. The HPLC-UV method was applied successfully to quantification of the marker compound (3,5-DCQA) in Aster glehni extracts after validation of the method with linearity, accuracy, and precision. Ethanolic extracts of A. glehni (AGEs) were evaluated by reflux extraction at 70 and $80^{\circ}C$ with 30, 50, 70, and 80% ethanol for 3, 4, 5, and 6 h, respectively. Among AGEs, 70% AGE at $70^{\circ}C$ showed the highest content of 3,5-DCQA of $52.59{\pm}3.45mg/100g$ A. glehni. Furthermore, AGEs were analyzed for their inhibitory activities on uric acid production by the xanthine/xanthine oxidase system. The 70% AGE at $70^{\circ}C$ showed the most potent inhibitory activity with $IC_{50}$ values of $77.01{\pm}3.13{\sim}89.96{\pm}3.08{\mu}g/mL$. The results suggest that standardization of 3,5-DCQA in AGEs using HPLC-UV analysis would be an acceptable method for the development of health functional foods.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.199-236
• /
• 2014

This paper analyses from the perspective of distributive justice the legal mechanisms for international allocation of orbital slots, which are of co-owned nature and thereby limited natural resources in outer space. The allocative function is delegated to the International Telecommunication Union. The Radio Regulation, amongst such other legal instruments as the Constitution and Convention, by which the ITU and contracting States thereof abides, dictates how the orbital positions are distributed. Thus, the RR is thoroughly reviewed in the essay. The mechanisms are in a broad sense categorized into two systems: 'a posteriori system' where the 'first come, first served' principle prevails; and 'a priori system' designed to foster the utilisation of the slots by those who lack space resources and are, in especial, likely to be marginalised under the former system. The argument proceeds on the premise that a posteriori system places the under-resourced States in unfavourable positions in the securement of the slots. In contrast with this notion, seven factors were instantiated for an assertion that the degradation of the distributive justice derived from the 'first come, first served' rule, which lays the foundation for the system, could be either mitigated or counterbalanced by the alleged exceptions to the rule. However, the author of this essay argues for counterevidences against the factors and thereby demonstrating that the principle still remains as an overwhelming doctrine, posing a threat to the pursuit of fair allocation. The elements he set forth are as in the following: 1) that the 'first come, first served' principle only applies to assignments capable of causing harmful interferences; 2) the interoperability of the principle with the 'rule of conformity' with the all the ITU instruments; 3) the viability of alternative registrations, as an exception of the application of the principle, on the condition of provisional and informational purposes; 4) another reference that matters in deciding the priority: the types of services in the TFA; 5) the Rule of Procedure H40 proclaiming a ban on taking advantage of coming first to the Register; 6) the technical factors and equity-oriented norms under international and municipal laws along with; 7) the changes of 'basic characteristics' of registered assignments. The second half of this essay illustrates by examining the relevant Annexes to the Regulation that the planned allocation, i.e., a priori system, bear the structured flaws that hinder the fulfillment of the original purpose of the system. The Broadcasting and Fixed Satellite Systems are the reviewed Plans in which the 'first come, first served' principle re-emerges in the end as a determining factor to grant the 'right to international recognition' to administrations including those who has not the allotted portions in the Plan.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.263-268
• /
• 2006

Recently, self-etching adhesive system has been introduced to simplify the clinical bonding proce- dures. It is less acidic compared to the phosphoric acid, thus there is doubt whether this system has enough bond strength to enamel. The purpose of this study was to investigate the influence of additional etching on the adhesion of resin composite to enamel. Ninety extracted bovine permanent anterior teeth were used. The labial surfaces of the crown were ground with 600-grit abrasive paper under wet condition. The teeth were randomly divided into six groups of 15 teeth each. Clearfil SE $Bond^{\circledR},\;Adper^{TM}$ Prompt L-Pop and Tyrian $SPE^{TM}$ were used as self-etching primers. Each self-etching primers were applied in both enamel specimens with and without additional etching. For additional etching groups, enamel surface was pretreated with 32% phosphoric acid (UNI-ETCH, Bisco, Inc., Schaumburg, IL. USA). Hybrid resin composite Clearfil AP-X, (Kuraray Co., Ltd., Osaka, Japan) was packed into the mold and light-cured for 40 seconds. Twenty-four hours after storage, the specimens were tested in shear bond strength. The data for each group were subjected to independent t - test at p < 0.01 to make comparisons among the groups. In Clearfil SE $Bond^{\circledR}$, shear bond strength of additional etching group was higher than no additional etching group (p < 0.01). In $Adper^{TM}$ Prompt L-Pop and Tyrian SPE, there were no significant difference between additional etching and non-etching groups (p > 0.01). In conclusion, self-etching adhesive system with weak acid seems to have higher bond strength to enamel with additional etching, while self-etching adhesive system with strong acid seems not.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1758-1763
• /
• 2012

This study was conducted to compare fragrance and volatile chemicals of essential oils in Gom-chewi (Ligularia fischeri) and Handaeri Gom-chewi (Ligularia fischeri var. spicifoprmis). Essential oils were extracted by steam distillation of leaves of Gom-chewi (GC) and Handaeri Gom-chewi (HGC), after which samples were collected by solid-phase micro extraction and the compositions of the essential oils were analyzed by gas chromatography-mass spectrometry (GC-MS). The yields of the essential oils in GC and HGC were 0.12% and 0.04%, respectively, and the threshold levels of the essential oils in GC and HGC were 0.01% and 0.1%, respectively. There were 19 constituents of the essential oil of Gom-chewi: 14 carbohydrates, 4 alcohols, and 1 acetate, and the major constituents were L-${\beta}$-pinene (36.02%), D-limonene (25.64%), ${\alpha}$-pinene (24.85%) and ${\beta}$-phellandrene (5.39%). In the essential oil of HGC, 25 constituents were identified: 17 carbohydrates, 4 alcohols, 3 acetates, and 1 N-containing compound, and the major constituents of HGC were D-limonene (39.74%), L-${\beta}$-pinene (35.43%) and ${\alpha}$-pinene (11.94%). The minor constituents of HGC were ${\rho}$-cymene, ${\gamma}$-muurolene, ${\gamma}$-cadinene, germacrene D, ingol 12-acetate and butyl 9,12,15-octadecatriene and nimorazole were not identified in the GC essential oil. Overall, the results showed that the fragrance and chemical compositions of essential oils in GC and HGC differed, suggesting that both essential oils could be used for the development of perfumery products.