• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.150-155
• /
• 1999

The ignition delay times behind reflected shock waves in $C_2H_6-O_2-Ar$ systems containing $CH_3Cl$ were measured for the range of temperatures between 1270 and 1544 K. The measurements indicated that $CH_3Cl$ inhibited the ignition of ethane ignition and the inhibition effects increased with increasing $CH_3Cl$ concentration. To clarify the inhibition effects of $CH_3Cl$ from the viewpoint of the reaction mechanism, computational analyses were performed in $C_2H_6-CH_3CI-O_2-Ar$ mixtures.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.451-455
• /
• 1999

The highest etch rate of Pt film was obtained at 10% $Cl_2$/90% Ar gas mixing ratio in our previous investigation. However, the problems such as the etch residues(fence) remained on the pattern sidewall, low selectivity to oxide as mask and low etch slope were presented. In this paper, the etching by additive $O_2$ gas to 10% $Cl_2$/90% Ar gas base was examined. As a result, the fence-free pattern and higher etch slope as about 60$^{\circ}$was observed and the selectivity to oxide increased to 2.4 without decreasing of the etch rate $1500{\AA}$/min. XPS surface analysis proved that a only little $O_2$ gas removes the Pt-CI compounds as residues on the etched surface.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.386-393
• /
• 1994

We have investigated output characteristics of XeCI excimer laser excited by transeverse electronbeam. We used e-beam output of 880 kV, 21 kA (70 ns, FWHM) and controlled current density of e-beam by pulsed magnetic coil (4.7 kG) which was fabricated around an e-beam diode (A-K gap is 21 mm) and laser chamber. We have obtained 35 J (4 atm) of e-beam deposition energy injected into laser media. The deposition energy was converted from an exposure area of Radcolor film and rising pressure of gas media which is measured by pressure jump method. The excited volume of $320cm^{3}$ was calculated. The maximum efficiency of 1.7% was obtained with the mixing ratio of HCllXe/Ar==0.2/ 6.3/93.5% and total pressure of 3 atm. Also laser output energy and specific energy were obtained 0.52 J and 1.7 J/I, respectively. For the analysis of experimental results we have developed computer simulation code. From the good agreements with the results of experiment and simulation we could theoretically explain the XeCI* formation channel. relaxation channel, and absorption channel of 308 nm.308 nm.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.6
• /
• pp.2441-2445
• /
• 2015

Background: Several risk factors leading to malignant transformation of hydatidiform moles have been described previously. Many studies showed that prophylactic chemotherapy for high risk hydatidiform moles could significantly decrease the incidence of malignancy. Thus, it is essential to discover a breakthrough to determine patients with high risk malignancy so that prophylactic chemotherapy can be started as soon as possible. Objectives: Development of a scoring system of risk factors as a predictor of hydatidiform mole malignant transformation. Materials and Methods: This research is a case control study with hydatidiform mole and choriocarcinoma patients as subjects. Multiple logistic regression was used to analyze the data. Odds ratios (OR), attributable at risk (AR : OR-1) and risk index ($ARx{\beta}$) were calculated for develoipment of a scoring system of malignancy risk. The optimal cut-off point was determined using receiver operating characteristic (ROC) curve. Results: This study analyzed 34 choriocarcinoma cases and 68 benign hydatidiform mole cases. Four factors significantly increased the risk of malignancy, namely age ${\geq}35$ years old (OR:4.41, 95%CI:1.07-16.09, risk index 5); gestational age ${\geq}$ 12weeks (OR:11.7, 95%CI:1.8-72.4, risk index 26); uterine size greater than the gestational age (OR:10.2, 95%CI:2.8-36.6, risk index 21); and histopathological grade II-III (OR:3.4, 95%CI:1.1-10.6, risk index 3). The lowest and the highest scores for the risk factors were zero and 55, respectively. The best cut-off point to decide high risk malignancy patients was ${\geq}31$. Conclusions: Malignant transformation of hydatidiform moles can be predicted using the risk scoring by analyzing the above four parameters. Score ${\geq}31$ implies high risk patients so that prophylactic chemotherapy can be promptly administered for prevention.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.106-113
• /
• 2009

Recently, due to many industrial accidents at construction sites, a variety of researches for structural health monitoring (SHM) of buildings are progressing. For real site application of SHM, one of the advanced technologies has blown as wireless sensor networks (WSN). In this paper, we proposed WIVA(WSN Monitoring framework based on 3D Visualization and Augmented Reality in Mobile Devices) system that applies 3D visualization and AR technology to mobile devices with camera based on WSN in order to expand the extent of information can observe. Moreover, we performed experiments to validate effectiveness in 3D and AR mode that utilize WSN data based on IEEE 802.15.4. In real implementation scenario, we demonstrated a fire occurrence test in 3-story building miniature.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.2
• /
• pp.137-148
• /
• 2004

In this paper, we propose a new camera calibration method for rotating multi-view cameras to generate image-based panoramic 3D Virtual Environment. Since calibration accuracy worsens with an increase in distance between camera and calibration pattern, conventional camera calibration algorithms are not proper for panoramic 3D VE generation. To remedy the problem, a geometric relationship among all lenses of a multi-view camera is used for intra-camera calibration. Another geometric relationship among multiple cameras is used for inter-camera calibration. First camera parameters for all lenses of each multi-view camera we obtained by applying Tsai's algorithm. In intra-camera calibration, the extrinsic parameters are compensated by iteratively reducing discrepancy between estimated and actual distances. Estimated distances are calculated using extrinsic parameters for every lens. Inter-camera calibration arranges multiple cameras in a geometric relationship. It exploits Iterative Closet Point (ICP) algorithm using back-projected 3D point clouds. Finally, by repeatedly applying intra/inter-camera calibration to all lenses of rotating multi-view cameras, we can obtain improved extrinsic parameters at every rotated position for a middle-range distance. Consequently, the proposed method can be applied to stitching of 3D point cloud for panoramic 3D VE generation. Moreover, it may be adopted in various 3D AR applications.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.05a
• /
• pp.2-2
• /
• 1999

금속재료의 표면 특성을 높이기 위해서 여러 표면처리 방법들이 사용되어져 오고 있다. 그 중 용사법에 의한 코팅방법이 최근의 현저한 기술적인 진보와 새로운 용사재료의 개발 등에 의해 여러 분야에 널리 응흉되고 있다. 일반적으로 이 용사법에 의한 코팅층은 다리, 선박 등의 대형 구조물에 대한 내식성 향상뿐만 아니라 자동차 및 항공기 부품, 핵 반응기 등의 코팅부에 널리 이용되고 였다. 특히 해수분위기에서 주로 사용되는 설비의 내식성을 향상시킬 목적으로 사용되 는 알루마늄 및 아연 합금의 용사 코팅층은 대부분의 경우 건조한 분위기보다는 수분이 많은 수용액 환경 하에서 사용되므로, 사용 환경 중에서 용사피막의 내식성을 조사하는 연구가 요구되고 있다. 사용되는 환경하에서의 침지시험에 의한 방법도 중요하지만, 가속화된 전기화학측정에 의한 방법 또한 이용된다. 열용사법에 의한 코팅층의 전기화학적 특성을 알아보기 위해서 3.5 % NaCI 수용액 내에서 AI 5 5083 모재와 Al-2%Zn 합금의 용사 코팅층 각각에 대한, 그리고 AI 5083 모재 위 AI-2%Zn 용사층이 코팅된 경우에 대한 분극거동과 침지시간에 따른 부식전위 및 분극저항성의 특성변화, 표면의 임피던스특성 변화 등을 측정하였다. 이 결과 모재에 대한 코팅층의 희생양극성올 판단할 수 있고, 모재/코팅 사스템의 분극거동은 혼성전위이론(mixed-potential theory)에 의해 결정되었다. 용사 코팅층이 박리되어 모재가 일부 드러난 경우를 모사한 시험편올 제작하고, 시험편 표면의 각 위치에 따라 부식전위 분포를 측정하였다. 그리고 측정 데이터를 기초로 표면의 상태변화를 모사하여 용사코팅에 의한 표면에서의 방식전위분포를 시율레이션하였다. 이와 같은 표면에서의 방식전위분포 해석을 통하여, 코팅층의 희생양극성에 의한 모재의 방식범위를 판단할 수 있다.의 비저 항을 갖는 철 박막에서도 99.9% 순도의 철을 타켓으로 하여 증착된 막은 일반 저탄소 강을 타켓으로 하여 증착된 막보다 훨씬 낮은 부식속도를 보였다.TEX>$He/O_2/Ar/N_2$의 gas를 사용 한 atmospheric pressure plasma cleaning 과 $Ar/O_2$의 gas를 사용한 ICP cleaning에서 이 차전자방출계수(SEEC)가 약 1.5~2.5배 증가된 것을 알 수 있었다. 저지능 등을 평가하여 각 실험결과를 비교분석하여 보았다. 수록 민감하여 304 의 IGSCC 와 매우 유사한 거동을 보인다. 본 강연에서는 304 와 600 의 고온 물에서 일어나는 IGSCC 민감도에 미치는 환경, 예민화처리, 합금원소의 영향을 고찰하고 이에 대한 최근의 연구 동향과 방식 방법을 다룬다.다.의 목적과 지식)보다 미학적 경험에 주는 영향이 큰 것으로 나타났으며, 모든 사람들에게 비슷한 미학적 경험을 발생시키는 것 이 밝혀졌다. 다시 말하면 모든 사람들은 그들의 문화적인 국적과 사회적 인 직업의 차이, 목적의 차이, 또한 환경의 의미의 차이에 상관없이 아름다 운 경관(High-beauty landscape)을 주거지나 나들이 장소로서 선호했으며, 아름답다고 평가했다. 반면에, 사람들이 갖고 있는 문화의 차이, 직업의 차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorne

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.9-23
• /
• 1994

Epitaxial $CoSi_2$ layer has been grown on NaCl(100) substrate at low deposition temperature($200^{\circ}C$) by multitarget bias cosputter deposition(MBCD). The phase sequence and crystallinity of deposited silicide as a function of deposition temperature and substrate bias voltage were studied by X-ray diffraction(XRD) and transmission electron microscopy(TEM) analysis. Crystalline Si was grown at $200^{\circ}C$ by metal induced crystallization(M1C) and self bias effect. In addition to, the MIC was analyzed both theoretically and experimentally. The observed phase sequence was $Co_2Si \to CoSi \to Cosi_2$ and was in good agreement with that predicted by effective heat of formation rule. The phase sequence, the CoSi(l11) preferred orientation, and the crystallinity had stronger dependence on the substrate bias voltage than the deposition temperature due to the collisional cascade mixing, the in-situ cleaning, and the increase in the number of nucleation sites by ion bombardment of growing surface. Grain growth induced by ion bombardment was observed with increasing substrate bias voltage at $200^{\circ}C$ and was interpreted with ion bombardment dissociation model. The parameters of $E_{Ar}\;and \alpha(V_s)$ were chosen to properly quantify the ion bombardment effect on the variation in crystallinty at $200^{\circ}C$ with increasing substrate bias voltage using Langmuir probe.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.37-46
• /
• 2007

In this paper, we propose technologies for enhancing the immersive realization of virtual objects in AR-based product design. Generally, multimodal senses such as visual/auditory/tactile feedback are well known as a method for enhancing the immersion in case of interaction with virtual objects. By adapting tangible objects we can provide touch sensation to users. A 3D model of the same scale overlays the whole area of the tangible object so the marker area is invisible. This contributes to enhancing immersion. Also, the hand occlusion problem when the virtual objects overlay the user's hands is partially solved, providing more immersive and natural images to users. Finally, multimodal feedback also creates better immersion. In our work, both vibrotactile feedback through page motors, pneumatic tactile feedback, and sound feedback are considered. In our scenario, a game-phone model is selected, by way of proposed augmented vibrotactile feedback, hands occlusion-reduced visual effects and sound feedback are provided to users. These proposed methodologies will contribute to a better immersive realization of the conventional AR system.

• Economic and Environmental Geology
• /
• v.21 no.3
• /
• pp.269-276
• /
• 1988

Ore deposits of Dadeok mine, the largest in the Bonghwa gold mining district, are composed of numerous gold and silver-bearing quartz veins emplaced in granite batholith. Mineralization of the Pungjeong vein, one of the representative vein in the mine was investigated. K-Ar age of sericite in the vein is $84{\pm}5$ Ma. Hypogene 6pen-space filling can be devided into four paragenetic stages; (1) fine grained quartz and carbonate; (2) quartz and carbonates with base metal sulfides, electrum, native silver, argentite, polybasite, freibergite, pyrargyrite, and Cu-Ag-Fe-S minerals; (3) quartz with base metal sulfides; (4) quartz and calcite with or without pyrite. Composition of electrum ranges from 44.17 to 56.50 atomic % Ag. Meanwhile FeS content of sphalerite coexisting with elctrum in stage II range from 0.01 to 1.67 mol. %. Homogenization temperatures for quartz and sphalerite of stage II ($239^{\circ}$ to $310^{\circ}C$), quartz of stage III ($206^{\circ}$ to $255^{\circ}C$) and quartz and calcite of stage IV ($232^{\circ}$ to $253^{\circ}C$) show little time-space variation during mineralization. Salinities of the fluid inclusions range from 5.5 to 12.8wt% NaCI in stage II, 7.3 to 12.3wt% in stage III and 4.5 to 8.0wt% in stage IV. Based on the homogenization temperatures, Fe content of sphalerite and Ag content of electrum, tempera ture and sulfur fugacity for stage II are estimated to be $208^{\circ}$ to $310^{\circ}C$ and $10^{-9.2}-10^{-12.8}$ bars, respectively.