• Title/Summary/Keyword: $CH_4$ addition

Search Result 461, Processing Time 0.028 seconds

Low-Resolution Spectroscopy for the Intriguing Globular Cluster NGC 2808 : Chemical abundance patterns among subpopulations

  • Hong, Seungsoo;Lim, Dongwook;Han, Sang-Il;Lee, Young-Wook
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.41 no.2
    • /
    • pp.43.4-44
    • /
    • 2016
  • The presence of multiple stellar populations is now well established in most globular clusters (GCs) in the Milky Way. The origin of this phenomenon, however, is yet to be understood. In this respect, the study of NGC 2808, an intriguing GC which hosts subpopulations with extreme helium abundances, would help to resolve this problem. In order to investigate chemical abundance patterns among different subpopulations in this GC, we have performed low-resolution spectroscopy for the red-giant-branch (RGB) stars and measured CN & CH bands, and Ca line strength. We have identified at least three subpopulations from the CN abundance distribution. This GC shows CN-CH anti-correlation following the general trend among "normal" GCs. In addition, we have cross-matched our results with the high-resolution data in literature, and found a tight correlation between CN strength and sodium abundance. However, CN is anticorrelated with oxygen abundance, as expected from the well known N(&Na)-O anticorrelation. In this talk, we will discuss the implication of these results.

  • PDF

EFFECT OF ETHENE $(C_2 H_4)$ ON THE PLASMA $DeNO_X$ PROCESS FROM DIESEL ENGINE EXHAUST

  • Park, Kwang-Seo;Kim, Dong-Inn;Lee, Hyeong-Sang;Chun, Bae-Hyeock;Yoon, Woong-Sup;Chun, Kwang-Min
    • International Journal of Automotive Technology
    • /
    • v.2 no.2
    • /
    • pp.77-83
    • /
    • 2001
  • Effect of ethene on the $DeNO_X$ conversion process in a simulated diesel engine operating conditions was investigated experimentally and theoretically. With the addition of even a small amount of ethene the NO to $NO_2$ conversion enhances greatly. The energy required to convert one NO molecule is 27 eV with 250 ppm ethene added, while 137 eV without ethene at 473 K. The effect of energy density, temperature, and the initial concentrations of ethene and oxygen are also discussed and the results show that the increase of the mentioned parameters lead to the promotion of NO oxidation. A kinetic model used in this study shows good agreement with the experimental result. Byproducts like formaldehyde ($CH_2$ 0) and methyl nitrite ($CH_3$ ONO) predicted by model calculation are broken up into CO and $H_2O$ eventually when high energy is delivered to the gas mixture. Sensitivity analysis shows that the main reactions of NO oxidation when ethene is added we: $HO_2+ NO \arrow NO_2 + OH, RO_2 + NO \arrow NO_2 + RO$, where R is a hydrocarbon radical. Also the direct oxidizing reaction of NO with O cannot be neglected.

  • PDF

A Study on the Optical Emission Spectroscopy of the RF Inductive Plasma Process (RF 유도형 플라즈마 프로세스에 대한 분광학적 연구)

  • Jang, Mun-Gug;Han, Sang-Bo;Park, Sang-Hyun
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.25 no.11
    • /
    • pp.103-112
    • /
    • 2011
  • This paper is tried to analysis the optical emission spectroscopy related to the position of inductive load coil and flow rates of methane and oxygen in the RF inductive plasma process. According to the position of load coil, peak of $H_{\alpha}$, $H_{\beta}$, and CH were appeared strongly at the middle position of the coil and it decreased both direction. The electron temperature was approximately 0.9[eV] at that position. Emission intensities of $H_{\alpha}$, $H_{\beta}$, and CH increased linearly by increasing input power. In addition, intensities of $H_{\alpha}$ and $H_{\beta}$ increased by increasing the flow rate of oxygen. It might be ascribed that the oxygen species were bonded with $C_nH_m$ by suppressing the combination with hydrogen atoms. Consequently, the optimal position of the inductive coil is decided to the intermediate position between 4th and 5th turns, the wanted carbon thin-film is possible to deposit by controlling flow rates of methane and oxygen.

Biological Predictors of Alzheimer's Disease Treatment (알츠하이머병 치료의 생물학적 예측인자)

  • Joo, Soo-Hyun;Im, Jeejin;Lee, Chang-Uk
    • Korean Journal of Biological Psychiatry
    • /
    • v.21 no.4
    • /
    • pp.115-117
    • /
    • 2014
  • Variety of biomarkers that are related to the Alzheimer's disease and its diagnosis and progress have been found. However, research lacks in predicting the reaction of the treatment. In addition, there is no definite treatment reaction to the disease but rather it is varied. The purpose of this review article is to study the research of the biomarkers that are able to predict the treatment reaction. There was a research that illustrated a relationship between plasma amyloid ${\beta}$ peptide, cerebrospinal fluid tau, neuroanatomical biomarkers and acetylcholinesterase inhibitors. Polymorphisms in genes of the cholinergic markers AChE, BuChE, ChAT and PON-1 were found to be associated with better clinical response to acetylcholinesterase inhibitors. Many pharmacogenetic studies have been conducted to evaluate the impact of the lipoprotein apolipoprotein E (APOE) genotype on treatment response to acetylcholinesterase inhibitor. However, there is no significant influence of the APOE genotypes on treatment response. Further research is needed to find other predictors of treatment with acetylcholinesterase inhibitors in patients with Alzheimer's disease.

Solubilization of Biphenyl Dimethyl Dicarboxylate in Aqueous Solution (수용액중의 비페닐디메칠디카르복실레이트의 가용화)

  • Bae, Joon-Ho;Park, Eun-Seok;Chi, Sang-Cheol
    • Journal of Pharmaceutical Investigation
    • /
    • v.27 no.3
    • /
    • pp.199-205
    • /
    • 1997
  • In order to formulate biphenyl dimethyl dicarboxylate(DDB) aqueous solutions, the effects of various solubilizing agents such as cosolvents(PG, PEG 400, glycerin, ethanol), surfactants,$(poloxamer\;407,\;Cremophor^{\circledR}\; RH40,\;Solutol^{\circledR},\;Tween\;80,\;sodium\;lauryl\;sulfate)$, complexation agent$(CELDEX^{\circledR}\;CH-20)$ and others(urea, niacinamide, propylene carbonate, HPMC) on the solubility of DDB in water were evaluated. The solubility of DDB in water was about $0.21\;{\mu}g/ml\;at\;20^{\circ}C$, while its solubility in PEG 400 was 5,000 times higher than that in water. 60% PEG 400 aqueous solution was selected as an optimum solvent system, and surfactants or other solubilizing agents were added to prevent DDB from recrystalization. The addition of surfactants in water increased the solubility of DDB from 15- to 34-fold, however, $CELDEX^{\circledR}\;CH-20$ and other agents studied showed negligible effects on the solubility of DDB in water. The 60% PEG 400 aqueous solution containing 5% $Cremophor^{\circledR}$ RH40 was appeared as the formula of choice. It showed acceptable physical stability after stored for 7 days at $4^{\circ}C$.

  • PDF

A Study on the Deintercalation Reaction of Li-Graphite Intercalation Compounds

  • O, Won Cheon;Kim, Beom Su
    • Bulletin of the Korean Chemical Society
    • /
    • v.21 no.1
    • /
    • pp.101-104
    • /
    • 2000
  • Li-graphite intercalation compounds (GICs), synthesized at elevated temperature and pressure, were allowed to decompose spontaneously in the atmosphere. The decomposition processes were analyzed by of X-ray diffraction, DSC analysis, FT-IR measurements, UV/VIS spectrophotometry. The deintercalation reaction of the Li-GICs ceased after 6 weeks and only the residual compounds could be observed. A strong exothermic reaction was observed at 300 $^{\circ}C$ in thermal decomposition, and relatively stable decomposition curves were formed. A few endothermic curves have been observed at 1000 $^{\circ}C.$ After 6 weeks deintercalation reaction time of GICs, many exothermic and endothermic reactions were accompanied at the same time. In addition the reactions of the functional groups such as aromatic rings, nitrogen, $-CH_3$, $-CH_2$ etc. of GDIC obtained by the above reaction were confirmed by FT-IR spectrum. UV/VIS spectrophotometric measurement clearly shows the formation of a minimum energy value ($R_{min}$) for the compounds between Li-GICs as a starting material and Li-GDICs obtained until after 3 weeks of the deintercalation reaction, while they were no clear energy curves from 4 weeks of reaction time, because of the formation of the graphite structure, of high stages and of the Li compounds surrounding the graphite in the deintercalation reaction.

Anisotropic Etching of Silicon in Aqueous TMAH/IPA Solutions (수용성 TMAH/IPA 용액의 실리콘 이방성 식각)

  • 박진성;송승환;정귀상
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1996.11a
    • /
    • pp.334-337
    • /
    • 1996
  • Si anisotropic etching is a key technology for micromachining. The main advantages of tetramethyl ammonium hydroxide (TMAH)-based solution are their full compatibility with IC process. In this work the anisotropic etching of single crystal Si in a TMAH (($CH_3$)$_4$NOH) based solution was studied. The influence of the addition of IPA to TMAH solution on their etching characteristics was also presented. The crystal planes bounding the etch front and their etch rates were determined as a function of temperature, crystal orientation, and etchant concentration. The etch rates of (100) oriented Si crystal planes decreased linearly with increasing the IPA concentration, The etched (100) planes were covered by Pyramidal-shaped hillocks below 15 wt.%, but very smooth surfaces were obtained above 20 wt.%. The addition of IPA to TMAH solution leads to smoother surfaces of sidewalls etched planes.

  • PDF

Synthesis and Spectroscopic Investigations of Some New rganotelluronium alts Based on Dicyclohexyl Telluride (디시클로헥실 텔루르염에 기반한 유기텔루로늄염의 성과 분광학적 분석)

  • Al-Rubaie, Ali Z.;Al-Mudhaffar, Dhafir M. H.;Al-Mowali, Ali H.;Asker, Kahtan A.
    • Journal of the Korean Chemical Society
    • /
    • v.53 no.5
    • /
    • pp.530-535
    • /
    • 2009
  • Dicyclohexyl telluride was obtained in a high yield by the reaction of cyclohexyl bromide with NaTeH(prepared in situ) in an aqueous ethanolic solution. A series of new organotelluronium salts of the general formula ${(cyclo-C_6H_11)}_2Te(R)X$ (where R = $CH_3$, X = I (1); R = $C_2H_5$, X = Br(2); R = $C_2H_5$, X = I (3); R = C_3H_5$, X = Br (4)) were prepared by the reaction of ${(cyclo-C_6H_11)}_2Te$ with the corresponding alkyl halide. Reaction of 1 with NaBPh4 gave compound 5 ( i.e. R = CH3, X = BPh4 ‒) in 78% yield. Reaction of ${(cyclo-C_6H_11)}_2Te$ with benzyl bromide and 4-bromophenacyl bromide gave unexpectedly dibenzylcyclohexyltelluronium bromide (6) and bis(4-bromophenacyl)cyclohexyltelluronium bromide (7), respectively. Reaction of 6 with NaBPh4 gave the corresponding tetraphenylborate derivative (8) in high yield. $^1H$ NMR studies revealed that in $CDCl_3$solution compound 1 eliminated alkyl halide. Conductivity, IR, $^1H\;and\;^{13}C$ NMR and thermal data for the new compounds are presented and discussed.

A 4-channel 3.125-Gb/s/ch VCSEL driver Array (4-채널 3.125-Gb/s/ch VCSEL 드라이버 어레이)

  • Hong, Chaerin;Park, Sung Min
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.54 no.1
    • /
    • pp.33-38
    • /
    • 2017
  • In this paper, a 4-channel common-cathode VCSEL diode driver array with 3.125 Gb/s per channel operation speed is realized. In order to achieve faster speed of the switching main driver with relatively large transistors, the transmitter array chip consists of a pre-amplifier with active inductor stage and also an input buffer with modified equalizer, which leads to bandwidth extension and reduced current consumption. The utilized VCSEL diode provides inherently 2.2 V forward bias voltage, $50{\Omega}$ resistance, and 850 fF capacitance. In addition, the main driver based upon current steering technique is designed, so that two individual current sources can provide bias currents of 3.0 mA and modulation currents of 3.3 mA to VCSEL diodes. The proposed 4-channel VCSEL driver array has been implemented by using a $0.11-{\mu}m$ CMOS technology, and the chip core occupies the area of $0.15{\times}0.18{\mu}m^2$ and dissipates 22.3 mW per channel.

Photochemical Reductions of Benzil and Benzoin in the Presence of Triethylamine and TiO? Photocatalyst

  • Park, Joon-Woo;Kim, Eun-Kyung;Koh Park, Kwang-Hee
    • Bulletin of the Korean Chemical Society
    • /
    • v.23 no.9
    • /
    • pp.1229-1258
    • /
    • 2002
  • This paper reports the photochemical reduction of benzil 1 to benzoin 2 and the reduction of 2 to hydrobenzoin 4 in deoxygenated solvents in the presence of triethylamine (TEA) and/or TiO2. Without TEA or TiO2, the photolysis of 1 resulted in very low yield of 2. The presence of TEA or TiO2 increased the rate of disappearance of 1 and the yield of 2, which were further increased considerably by the presence of water. The photoreduction of 1 to 2 proceeds through an electron transfer to 1 from TEA or hole-scavenged excited TiO2 followed by protonation. In the reaction medium of 88 : 7 : 2 : 3 CH3CN/CH3OH/H2O/TEA with 2.5 $㎎/m{\ell}$ of TiO2, the yield of 2 was as high as 85 % at 50 % conversion of 1. The photolysis of 2 in homogeneous media resulted in photo-cleavage to benzoyl and hydroxybenzyl radicals, which are mostly converted to benzaldehyde. The reduction product 4 is formed in low yield through the dimerization of hydroxybenzyl radicals. The addition of TEA increased the conversion rate of 2 and the yield of 4 significantly. This was attributed to the scavenging effect of TEA for benzoyl radical to produce N,N-diethylbenzamide and the photoreduction of benzaldehyde in the presence of TEA. The ratio of $(\pm)$ and meso isomers of 4 obtained from the photochemical reaction is about 1.1. This ratio is the same as that from the photochemical reduction of benzaldehyde in the presence of TEA. In the TiO2-sensitized photochemical reduction of 2, meso-4 was obtained in moderate yield. The reduction of 2 to 4 proceeds through two consecutive electron/proton transfer processes on the surface of the photocatalyst without involvement of ${\alpha}-cleavage$. The radical 11 initially formed from 2 by one electron/proton process can also combine with hydroxy methyl radical, which is generated after hole trapping of excited TiO2 by methanol, to produce 1,2-diphenylpropenone after dehydration reaction.