• Membrane Journal
• /
• v.26 no.5
• /
• pp.365-371
• /
• 2016

A numerical analysis was performed for a separation of carbon dioxide and methane using 2-staged, membrane process where two polysulfone hollow fiber membrane modules were connected to provide both the methane concentration richer than 95% and the recovery higher than 90% using the recycled flows. The Compaq Visual Fortran 6.6 software was utilized for the numerical simulation. Both the methane concentration and the recovery % of methane could be successfully predicted as the function of the operating conditions. As the feed pressure, the methane concentration, and the flow rate increase, the methane concentration in a product is also found to increase and the recovery of methane is found to decrease.

• Journal of the Korean Society of Combustion
• /
• v.17 no.4
• /
• pp.11-20
• /
• 2012

The Blow-off characteristics of LPG/air lean pre-mixed flames were experimentally investigated using a double and a multiple concentric coflow burners. Experiments were conducted to understand the effects of recirculation motion, thermal interaction between flames, and stratified flame configuration. Here, the stratified premixed flame is a "new concept" of a flame that sequentially contains fuel rich, stoichiometric, and fuel lean reaction zones in a flame. The blow-off from a lean premixed flame was significantly suppressed with recirculation motion. The recirculation motion by itself, however, was not sufficient to prevent the blow-off when the equivalence ratio became low. The existence of a inner premixed flame could also help to prevent the blow-off of lean premixed flame; however, the blow-off suppression effect was rather diminished by weakened recirculation motion with the presence of inner flame. The inner flame could be separated from an outer flame on a multiple concentric coflow burner, causing recirculation motion as well as thermal interaction between flames to become effective; therefore, the blow-off was further suppressed. The lean premixed flame could be stabilized with a fuel rich premixed flames that was produced with the supply of fuel through an inner nozzle. The penetration of lean premixed gas from outside into the fuel stream produced a lifted rich premixed flame. Chemiluminescence images of OH, CH, and $C_2$ radicals confirmed the structure of a stratified premixed flame. The stable premixed flames could be obtained at the very fuel lean condition by applying the stratified premixed flame concept.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.94-103
• /
• 1998

We investigated a bias effect for diamond films deposited by a HFCVD(Hot Filament Chemical Vapor Deposition) method using a methane-hydrogen gas mixture. During deposition total chamber pressure, methane concentration, filament temperature and substrate temperature was 20 torr, 1.0%, $2100^{\circ}C$ and $980^{\circ}C$ respectively. Also DC bias was applied during both the nucleation stage and the growth stage systematically. We found that negative bias enhanced the nucleation density at the nucleation stage, but it made a bad influence on the morpholohy of films at the growth stage. Positive bias enhanced the growth rate and resulted in a good morpholohy of films. Therefore we concluded that it was effective to apply the negative bias during the nucleation stage and then to switch into the positive bias during the growth stage in the fabrication of diamond films.

• Korean Journal of Materials Research
• /
• v.13 no.12
• /
• pp.775-778
• /
• 2003

We studied InP etching in high density planar inductively coupled $BCl_3$and $BCl_3$/Ar plasmas(PICP). The investigated process parameters were PICP source power, RIE chuck power, chamber pressure and $BCl_3$/Ar gas composition. It was found that increase of PICP source power and RIE chuck power increased etch rate of InP, while that of chamber pressure decreased etch rate. Etched InP surface was clean and smooth (RMS roughness <2 nm) with a moderate etch rate (300-500 $\AA$/min) after the planar $BCl_3$/Ar ICP etching. It may make it possible to open a new regime of InP etching with $CH_4$$H_2$-free plasma chemistry. Some amount of Ar addition (<50%) also improved etch rates of InP, while too much Ar addition reduced etch rates of InP.

• Korean Journal of Remote Sensing
• /
• v.19 no.3
• /
• pp.217-221
• /
• 2003

The Measurement of Pollution in the Troposphere (MOPITT) instrument is an eight-channel gas correlation radiometer that launched on the Earth Observing System (EOS) Terra spacecraft in 1999. Its main objectives are to measure carbon monoxide (CO) and methane (CH4) concentrations in the troposphere. This study analyzes tropospheric carbon monoxide distributions using MOPITT data and compare with ozone distributions in Northeast Asia. In general, seasonal CO variations are characterized by a peak in spring and decrease in summer. Also, this study revealed that the seasonal cycles of CO are maximum in spring and minimum in summer with average concentrations ranging from 118ppbv to 170ppbv. The monthly average of CO shows a similar profile to those of O3. This fact clearly indicates that the high concentration of CO in spring is caused by two possible causes: the photochemical CO production in the troposphere, or the transport of the CO in the northeast Asia. The CO and $O_3$ seasonal cycles in the Northeast Asia are influenced extensively by the seasonal exchange of the different types of air mass due to the Asian monsoon. The continental air masses contain high concentrations of $O_3$ and CO due to higher continental background concentrations and sometimes due to the contribution of regional pollution. In summer the transport pattern is reversed. The Pacific marine air masses prevail over Korea, so that the marine air masses bring low concentrations of CO and $O_3$, which tend to give the apparent minimum in summer.

• Korean Journal of Materials Research
• /
• v.31 no.9
• /
• pp.525-531
• /
• 2021

Carbon-encapsulated Ni catalysts are synthesized by an electrical explosion of wires (EEW) method and applied for CO₂ methanation. We find that the presence of carbon shell on Ni nanoparticles as catalyst can positively affect CO₂ methanation reaction. Ni@5C that is produced under 5 % CH₄ partial pressure in Ar gas has highest conversions of 68 % at 350 ℃ and 70 % at 400 ℃, which are 73 and 75 % of the thermodynamic equilibrium conversion, respectively. The catalyst of Ni@10C with thicker carbon layer shows much reduced activity. The EEW-produced Ni catalysts with low specific surface area outperform Ni catalysts with high surface area synthesized by solution-based precipitation methods. Our finding in this study shows the possibility of utilizing carbon-encapsulated metal catalysts for heterogeneous catalysis reaction including CO₂ methanation. Furthermore, EEW, which is a highly promising method for massive production of metal nanoparticles, can be applied for various catalysis system, requiring scaled-up synthesis of catalysts.

• Journal of Environmental Science International
• /
• v.28 no.1
• /
• pp.65-73
• /
• 2019

The catalytic activity of Ni-0.2%YSZ (Yttria-Stabilized Zirconia) with different promoters was evaluated for $CO_2$ methanation. The catalysts were weighed for mixing and they were dried at $110^{\circ}C$ for molding into disks. The concentration of $CO_2$ and $CH_4$ for conducting of $CO_2$ methanation were analyzed by gas chromatography and the physical characteristics of the disk-type catalyst formed were analyzed by X-ray diffraction, scanning electron microscope and energy dispersive x-ray spectrometer. The addition of $CeO_2$ as a promoter for Ni-0.2%YSZ (denoted as Ni-5%Ce-0.2%YSZ) resulted in the highest $CO_2$ methanation. It also showed catalytic activity at a low temperature($200^{\circ}C$). Following this, $ZrO_2$, $SiO_2$, $Al_2O_3$ and $TiO_2$ were added to Ni-5%Ce-0.2%YSZ to compare the $CO_2$ methanation, and the highest efficiency was found for. Ni-1%Ti-5%Ce-0.2%YSZ Then, the concentration of Ti was increased to 10% and the catalytic activity was estimated using seven different types of commercial $TiO_2$. In conclusion, ST-01 $TiO_2$ showed the highest efficiency for $CO_2$ methanation.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1275-1284
• /
• 2022

This study provides an investigating the electrolyte reaction characteristics during thermal runaway of a lithium-ion battery(LIB). Dimethyl carbonate(DMC) is known as the main substance that makes up the electrolyte. The mono-molecular decomposition characteristics of DMC were derived through numerical analysis. Cobalt oxide can release oxygen under high temperature conditions. Also, DMC is converted to CH₄, H₂, CO, and CO₂. Especially, it was found that the decomposition of the DMC begins at a temperature range of 340-350℃, which dramatically increases the internal pressure of the LIB. In the by-products gases, the molar ratio of CO and CO₂ changed according to the molecular structure of DMC and temperature conditions. The correlation of the [CO]/[CO₂] ratio according to the temperature during thermal runaway was derived, and the characteristics of the reaction temperature could be estimated using the molar ratio as an indicator. In addition, the oxidation and decomposition characteristics of DMC according to the residence time for each temperature were estimated. When DMC is exposed to low temperature for a long time, both oxidation and decomposition may occur. There is possibility of not only increasing the internal pressure of the LIB, but also promoting thermal runaway. In this study, internal environment of LIB was identified and the reaction characteristics between the active materials of the cathode and electrolyte were investigated.

• Animal Bioscience
• /
• v.37 no.3
• /
• pp.405-418
• /
• 2024

In recent years, there has been a growing argument attributing the primary cause of global climate change to livestock industry, which has led to the perception that the livestock industry is synonymous with greenhouse gas (GHG) emissions. However, a closer examination of the global GHG emission by sector reveals that the energy sector is responsible for the majority, accounting for 76.2% of the total, while agriculture contributes 11.9%. According to data from the Food and Agriculture Organization of the United Nations (FAO), the total GHG emissions associate with the livestock supply chain amount to 14.5%. Within this, emissions from direct sources, such as enteric fermentation and livestock manure treatment, which are not part of the front and rear industries, represent only 7%. Although it is true that the increase in meat consumption driven by global population growth and rising incomes, has contributed to higher methane (CH₄) emissions resulting from enteric fermentation in ruminant animals, categorizing the livestock industry as the primary source of GHG emissions oversimplifies a complex issue and disregards objective data. Therefore, it may be a misleading to solely focus on the livestock sector without addressing the significant emissions from the energy sector, which is the largest contributor to GHG emissions. The top priority should be the objective and accurate measurement of GHG emissions, followed by the development and implementation of suitable reduction policies for each industrial sector with significant GHG emissions contributions.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.228-239
• /
• 2024

Objective: The objective of the experiment was to study yeast supplementation (yeast, Y) and dried kratom leaves (DKTL) on the digestibility, ruminal fermentation, blood metabolites and nitrogen balance in goats. Methods: Four of 7 to 8 months old male crossbred (50% Thai Native-Anglo Nubian) goats with average liveweight 20±0.13 kg were randomly assigned according to a 2×2 factorial arrangement in a 4×4 Latin square design to receive four diets ad libitum basis. The study investigated the effects of two levels of yeast (Y) supplementation (Y, 0 and 0.5g/kg dry matter [DM]) along with two levels of DKTL supplementation (DKTL, 0 and 4.44g/kg DM). The experimental groups were as follows: T1 = control group with 0Y+0DKTL, T2 = 0Y+4.44 DKTL, T3 = 0.5Y+0DKTL, and T4 = 0.5Y+4.44 DKTL. Results: The results showed that there were no interactions between Y levels and DKTL levels with respect to total DM intake, but there were significant effects (p<0.05) by levels of Y; goats receiving 0.05 g/kg DM Y had higher than goats fed 0.0 g/kg DM on average (kg/d). A percentage of body weight (% BW) and grams per kilogram of metallic weight (g/kg w^0.75) had no influence on yeast levels and DKTL, but there was a difference (p<0.05) by yeast level Y at 0.5 g/kg DM, being higher compared to the non-supplemented group. Apparent digestibility coefficient of nutrition in the form of (DM, organic matter, crude protein, neutral detergent fiber, and acid detergent fiber) was an increased trend in the Y-level complementary group at 0.5 g/kg DM and DKTL at 4.44 g/kg DM, respectively. Protozoa populations decreased in the group receiving Y levels at 0.5 g/kg DM and DKTL levels at 4.44 g/kg DM when compared to group T1. The acetic acid concentration and methane gas generation decreased (p<0.05) in the group receiving Y levels of 0.5 g/kg DM and DKTL levels of 4.44 g/kg DM, while the amount of propionic acid increased (p<0.05). Conclusion: Effects of feeding combinations of Y and DKTL supplementation on feed showed no interaction effect (Y×DKTL) on feed intake, rumen fermentation, bacterial and fungi population. The effect on protozoal populations was lower in the group that was supplemented with DKTL at 4.44 g/kg DM related to synthetic CH₄ was reduced.