• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.2
• /
• pp.148-156
• /
• 1994

Three composition in the system of $YO_{1.5}-BaO-CuO$ were grown using a cold crucible (skull) melting technique with a 50 kW R.F. induction generator operating at 4 MHz as the power source. The starting materials were prepared by conventional ceramic powder processing methods, loaded into the skull, and melted at about $1200^{\circ}C$. For this study, compositions near the $YBa_2Cu_3O_X$ region were selected. The growth rates used ranged from 4 cm/hr to 0.25 cm/hr. The relation between the microstructures and the starting composition of each ingot was determined using metallograph, X-ray diffraction, and energy dispersive X-ray analysis. Both $YBa_2Cu_3O_X$ and $Y_2BaCuO_5$ needle-shaped crystals, aligned with the growth direction, were formed in the $CuO-BaCuO_2$ eutectic matrix of the $YBa_2Cu_7O_x and YBa_5Cu_{11}O_x$ ingot.

• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.293-299
• /
• 1988

The effects of flux KCl and dopants, La2O3 and Ta2O5, on the PTCR characteristics in molten salt synthesized BaTiO3 have been studied. The resistivity of BaTiO3 at room temperature decreases with increasing amount of dopant La2O3 up to 0.2 atom%, and then increases with La2O3 content. In case of dopant Ta2O5, it increases with increasing amount ofthe dopant. These results could be explained by observation of the microstructure and defect equation. From the results of complex impedance-frequency characteristics, the grain resistances are almost same but the resistances at the grain boundary are quite different.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.295-298
• /
• 2003

The principal problems in development of dielectric paste materials for PDP(plasma display panel)are PbO free paste and low melting temperature. We prepared PbO free paste from glasses in the system BaO-ZnO-$B_2O_3-V_2O_5$. DTA, XRD and SEM were used to study and characterize BaO-ZnO-$B_2O_3-V_2O_5$ glasses. PbO free paste developed at this paper has thermal expansion of $74{\times}10^{-7}/^{\circ}C$, DTA transformation point of $460^{\circ}C$, and firing condition of $560^{\circ}C$, 10min.

• Journal of the Korean Magnetics Society
• /
• v.6 no.4
• /
• pp.204-210
• /
• 1996

M type hexa-ferrites were prepared by means of a solid state reaction using mill scale, $Fe_{2}O_{3}$, and the mixture of mill scale and $Fe_{2}O_{3}$. The mixture of powders were calcined at $1150^{\circ}C$ for 2 hrs. and sintered at $1250^{\circ}C$ for 2 hrs, with varing the mole ratio of $Fe_{2}O_{3}$/$BaCO_{3}$, by 5.2~6.0. And the magnetic properties and morphologies of Baferrites with impurities such as $SiO_{2},\;Al_{2}O_{3},\;MgO,\;CaO\;and\;Na_{2}O$ in the mill scale were investigated. The magnetic properties were worsened by the addition of $Na_{2}O because of non-reacted iron oxide and intermediate compound of $BaFe_{2}O_{4}$ but they were improved apparently by the addition of $Si_{2}$ and $Al_{2}O_{3}$ in the composition of $BaO.5.6Fe_{2}O_{3}$. Moreover, $M_{s}$ decreased but $_{B}H_{C}$ increased through the addition of $Al_{2}O_{3}$ in Ba-ferrite. ${(BH)}_{max}$ of sintered BM($BaCO_{3}$, mill scale mixture) and BFM($BaCO_{3}$, $Fe_{2}O_{3}$, and null scale mixture) were 0.86 and 1.04 MGOe, respectively, and the magnetic properties were changed around $440^{\circ}C$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1165-1166
• /
• 2006

An experiment was carried out to investigate the effect of Ba Stearate as a reducing agent on the magnetic and physical properties of anisotropic $BaFe_2-W$ type ferrite magnets. It was found that the magnetic properties of $BaO{\cdot}8.5Fe_2O_3$ were improved by adding 0.3 wt% of Ba Stearate, 0.5 wt% of $SiO_2$, and 0.5 wt% of CaO together. The optimum conditions for making magnets were as follows; semisintering condition: $1350^{\circ}C{\times}4.0$ h in nitrogen gas atmosphere, drying condition: $180^{\circ}C{\times}2.0$ h in air, sintering condition: $1160^{\circ}C{\times}1.5$ h in nitrogen gas atmosphere. Magnetic and physical properties of a typical sample were $J_m$ = 0.46 T, $J_r$ = 0.43 T, $H_{cJ}$ = 182.3 kA/m, $H_{cB}$ = 177.2 kA/m, $(BH)_{max}$ = 33.8 kJ/$m^3$, $T_C$ = $495^{\circ}C$ and $K_A$ = $2.65{\times}10^5\;J/m^3$ and $H_A$ = 1332 kA/m.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.659-663
• /
• 1998

The effect of Bi-substitution in $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$ ceramic was studied on the formation of crystal phases, microstructure, and microwave dielectric properties. $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$, solid solution (0$\leq$x$\leq$0.2) were formed by Bi-substitution into the Nd site of $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$ ceramics. Average grain size increased with Bi-substitution. Dielectric constant(${\varepsilon}_r$) increased from 84 to U8, and the temperature coefficient of resonant frequency(${\tau}_f$) decreased from 44 ppm/$^{\circ}C$ to -30 ppm/$^{\circ}C$ when Bi contents increased up to x=0.2 in $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$ solid solutions. $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$ solid solutions with x=0.04~0.08 showed the most superior microwave dielectric properties, those are ${\varepsilon}_r$= 89-92, Q . f = 5855~6091 GHz, and (${\tau}_f$)= -7.5-7.5 ppm/$^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.5-8
• /
• 1989

Conventional ceramic method has been used to prepare the green phase, $Y_2BaCuO_5$, commonly observed in 90-K superconductor $YBa_2Cu_3O_P{7-{\delta}}$as an impurity phase. The powder X-ray diffraction analysis indicates that $Y_2BaCuO_5$ has an orthorhombic symmetry with lattice parameter of a = 12.2 $\AA$, b = 5.61 $\AA$, and c = 7.14 $\AA.$ The average g-value 2.13 observed in ESR spectrum is attributable to Cu2+ stabilized in $C_{4v}$ field. From the magnetic susceptibility ($\mu$eff = 2.29 BM) and the ESR measurements, it is confirmed that Cu(II) $3d^9$ electrons in $Y_2BaCuO_5$ are localized and can be characterized by Curie-Weiss behavior. Optical reflectance spectrum shows a broad absorption peak around 680 nm due to dxy ${\rightarrow}$ $dx^2-y^2$ eletronic transition.

• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.379-385
• /
• 1999

Minute boehmite crystals with high aspect rations, which were hydrothermally synthesized from gibbsite in $Ba(OH)_2$ solution, occluded Ba with the Ba/Al molar ratio of about 0.03 in their interlayers. Their surface areas were about 14$\m^2$/g. The Ba-intercalated bohemite samples were partly used for producing $BaAl_{12}O){19}$ with low sinterability by externally supplementing $Ba(OH)_2$, and for forming transient aluminas. The surface area of $BaAl_{12}O){19}$ obtained by firing at $1500^{\circ}C$ for 3 h was 5.3$\m^2$/g, which was significantly lower than 12$\m^2$/g of the sol-gel origin. While a mixture ${\gamma}$-alumina and BaO is known to from $BaAl_{12}O){19}$ at $1200^{\circ}C$, solid state reaction between η-alumina transformed from the Ba-intercalated boehmite and BaO formed from $Ba(OH)_2$ deposited on the boehmite started above $1300^{\circ}C$. This suggests that large sized $Ba^{2+}$ ion occluded in η-alumina considerably suppresses the diffusion of $Al^{3+}$ ion. The surface area of the Ba-intercalated boehmite fired at $1400^{\circ}C$ for 3h was as high as 14$\m^2$/g indicative of its potential applicability to combustion catalysts. But it was decreased to 5.0$\m^2$/g after firing at $1500^{\circ}C$ for 3 h, accompanied by abrupt formations of $\alpha$-alumina and $BaAl_{12}O){19}$ as main products. The suppression of $\alpha$-alumina formation up to $1400^{\circ}C$ also suggests the significant blocking effect of $Ba^{2+}$ ion on the diffusion of the component ions.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.45-50
• /
• 2015

The goal of this research is the create novel magnets with no rare-earth contents, with larger energy product by comparison with currently used ferrites. For this purpose we developed nano-sized hard-type/soft-type composite ferrite in which high remanent magnetization (Mr) and high coercivity (Hc). Nano-sized Ba-ferrite, Ni-Zn ferrite and $BaFe_{12}O_{19}/Ni_{0.5}Zn_{0.5}Fe_2O_4$ composite ferrites were prepared by sol-gel combustion method by use of glicine-nitrate and citric acid. Nanocomposite ferrites were calcined at temperature range $700-900^{\circ}C$ for 1h. According to the X-ray diffraction patterns and FT-IR spectra, single phase of NiZn-ferrite and Ba-ferrite were detected and hard/soft nanocomposite ferrite was indicated to the coexistence of the magnetoplumbite-structural $BaFe_{12}O_{19}$ and spinel-structural $Ni_{0.5}Zn_{0.5}Fe_2O_4$ that agreed with the standard JCPDS 10-0325 data. The particle size of nanocomposite turn out to be less than 120 nm. The nanocomposite ferrite shows a single-phase magnetization behavior, implying that the hard magnetic phase and soft magnetic phase were well exchange-coupled. The specific saturation magnetization ($M_s$) of the nanocomposite ferrite is located between hard ($BaFe_{12}O_{19}$) and soft ferrite($Ni_{0.5}Zn_{0.5}Fe_2O_4$). The remanence (Mr) of nanocomposite ferrite is much higher than that of the individual $BaFe_{12}O_{19}$ and $Ni_{0.5}Zn_{0.5}Fe_2O_4$ ferrite, and $(BH)_{max}$ is increased slightly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.351-354
• /
• 1998

The formation of the $YBa_2Cu_30_{7_\delta}$(Y123) thick films has been investigated by a surface diffusion Imcess between $3BaCu0_2$+2CuO composite coating powder and a $Y_2BaCuO_5$(Y211). This reaction has been studied in the temperature of $930^{\circ}C$ and $940^{\circ}C$ for 2h to 10h in an oxygen atmosphere. The Y211 substrates becomes covered by co-precipitation of Y123 grains and CuO inclusions. X-ray diflractotnctn. revealed that the lager consisted of an orthorhombic crystal structure. The maximum Jc of $400A/\textrm{cm}^2$ is abtained when the specimen was heat-treated at $930^{\circ}C$ for 6h on the Y211 substrate.