• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.190-195
• /
• 1995

Temperature dependences of the dielectric constant K(T), remanent polarization $P_{r}$, (T), effective birefringence overbar .DELTA.n(T), transmitted light intensity and quadratic electro optic coefficient R(T) of the two-stage sintered xBa(L $a_{1}$2/N $b_{1}$2/) $O_{3}$-(1-x)Pb(Z $r_{y}$ $Ti_{1-y}$) $O_{3}$(x=0.085, 0.09, 0.40.leq.y.leq.0.70) ceramics were investigated. Increasing the PbZr $O_{3}$ contents, the crystal structure of a specimen was changed from a tetragonal phase to a rhombohedral and cubic phase, and the phase transition was showed a diffuse phase transition(DPT) characteristics. In the compositions which located on the PE-FE phase boundary, the discrepancy was observed between the Curie temperature and temperature which a microscopic polarization and effective birefringence were disappeared.red.d.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.159-164
• /
• 1999

PTC (Positive Temperature Coefficient of Resistivity) 소자는 티탄산 바륨 (barium titanate) 계열의 페로브스카이트 (perovskite) 구조를 가지는 물질을 반도체화시켰을 때 큐리온도 부근에서 저항이 1,000배 이상 증가하는 물질을 가리킨다. 처음에는 BaTiO$_3$를 대상으로 12$0^{\circ}C$ 부근에서 발생하는 PTC 현상을 연구하였으나, BaTiO$_3$에 SrTiO$_3$, PbTiO$_3$를 첨가하면, 큐리온도를 낮출 수도 있고, 높일 수도 있어서 PTC 소자의 사용 영역이 넓어졌다. PTC 소자의 응용분야는 1) 천연색 텔레비젼 수상기와 모니터에 사용하는 degausser와 같은 스위칭 소자, 2) 냉장고용 컴프레서등에 사용되는 모터 기동용 소자, 3) 자동차 연료조기증발용 히타와 같은 세라믹 히타 소자로 크게 구분된다.(중략)

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.5-6
• /
• 2006

Using the $(Ba_{0.5}Sr_{0.5}){TiO_3}$(BST) powders prepared by the Sol-Gel method, the EST thick films were fabricated on the ${Al_2}{O_3}$ substrates coated with Pt by the screen printing method. Compared with pure EST thick films, the structural and dielectric properties of the EST thick films doped with 1${\sim}$10 wt % MgO were investigated. It was observed that the Mg substitution into EST causes a shift in the cubic-tetragonal EST phase transition peak to a lower temperature. The microstructure of the EST substituted with Mg was homogeneous and dense. Mg substitution into EST had a significant effect on the grain size reduction. Dielectric constant was decreased with increasing the MgO content and temperature. In the case of EST thick films doped with 1 wt% MgO, the relative permittivity and dielectric loss were 158] and 1.4 % at 1 MHz.

• Journal of the Optical Society of Korea
• /
• v.8 no.2
• /
• pp.79-82
• /
• 2004

High-efficiency mutually pumped phase conjugation (MPPC) has been realized in a BaTiO$_3$:Ce crystal in the bridge geometry. The laser source is a dye laser operating from 580 to 650 nm. We have observed that, with a beam ratio of 1, self-pumped phase conjugation (SPPC) appears and competes with MPPC at short wavelengths while it disappears at long wavelengths. When the beam ratio is slightly higher than 1, SPPC no longer occurs. Phase conjugate reflectivity near 500% has been obtained at a beam ratio of 70. Our experiments demonstrate that Ce-doped BaTiO$_3$crystals, which have already been found efficient in SPPC experiments, are also efficient for the generation of MPPC.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.181-184
• /
• 2012

$BaTiO_3$ based multilayer ceramic capacitors with Ni electrodes can be explained as 2-2 composites with different thermal expansion coefficient and sintering behaviors. To achieve the high capacitance and reliability of MLCCs, a homogenous Ni electrode configuration with high connectivity is required. We controlled the heating rates during sintering to achieve densification by suppressing grain growth. Experimental results revealed that a large heating rate gave high connectivity of Ni electrode, high capacitance, small dissipation factor, high breakdown voltage, and high reliability of MLCC chips.

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.16-20
• /
• 2002

Semiconducting (Ba.Sr)TiO$_3$ceramic device, which shows the PTCR effect, has been usually used as a current limiter. In this case, the device should endure the condition under the high electric field. In this study, the dynamic electrical properties of the PTCR device under high voltage has been evaluated. Two different formulated powders were used and the sintered bodies exhibited the different grain size and porosity. The wide range of characterization such as complex impedance spectroscopy, microstructure, I-V characteristics and voltage dependence of resistivity of the samples were performed. The PTCR effect of the specimen containing coarse grains was very sensitively dependent on the AC electric field, showing that it was inversely pro-portional to the grain boundary potential barrier. The withstanding voltage was proportional to the potential barrier of grain boundary.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.147-154
• /
• 1995

Abnormal grain growth behavior of BaTiO3 ceramics with controlling of particle size distribution of calcined powder was investigated. The particle size distribution was controlled by changing the calcining temperature or by using of classification and regrinding process. With broadening of the normallized size distribution in calcined powder, it showeda normal grain growth behavior in sintered body due to an increase of volume fraction of seed grain in the calcined powder. It was supposed that the seed grains could easily contact each other for the rapid grain growth during sintering process and resulted in fast switching-over from abnormal to normal grain growth stage.

• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.475-482
• /
• 1996

초음파분무를 이용한 MOCVD법으로 강유전 BaTiO3 박막을 제조하였다. 초음파 분무 MOCVD법은 비교적 저온에서도 후열처리없이 결정화된 박막의 제조가 가능하다. 증착한 박막은 기판온도가 증가할수록 (110) 우선 배향성을 가졌으며, 기판온도에 따라서 서로 다른 결정상을 나타내었다. 기판온도가 55$0^{\circ}C$인 경우에 증착한 박막은 결정화가 완전히 진행되지 않았으며, 결정립의 크기도 매우 작아 상온에서 입방정상의 특성을 보였다. $600^{\circ}C$에서 증착한 박막은 결정화가 진행되어 입자의 크기는 성장하였으나 의사 입방정상을유지하고 있었다. 반만 $650^{\circ}C$에서 증착한 박막은 결정화뿐만 아니라 주상으로 성장하여 수직 방향으로는 박막 두께의 크기를 가져 CV 특성에서 이력곡선을 보였으며, 정전용량의 온도 변화에 따른 특성에서도 상전이의 특성을 나타내었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.184-184
• /
• 2003

고성능 전자부품 개발이 진행되면서 나노크기의 분말에 대한 합성연구가 활발히 진행되고 있는 추세이다. 실제 나노크기의 입자는 그 기능이 기존 fm크기의 입자에 비해 뛰어나 많은 연구자들의 관심이 되어 있음에도 불구하고 제품으로 응용된 예는 거의 없는 실정인데 이는 나노크기의 입자라 할지라도 응집이 되어 있거나 작업하기 어렵기 때문이다. 따라서 본 연구에서는 응집된 BaTiO$_3$분말에 분산제와 함께 고속볼밀을 하여 이에 따른 분산 효과와 tape casting을 위한 최적 분산 안정성에 대하여 연구하였다. 분산제의 종류와 볼밀시간에 따른 분산효과를 확인하기 위하여 zeta potential 값을 비교하였으며 이러한 분산제의 종류와 볼밀시간에 따라 분산효과가 변하는 것을 확인할 수 있었다. 또한 분산된 분말에 대해 다른 분자량을 가지는 PVB와 상용바인더를 사용하여 tape casting하였다. 결합제의 종류에 따라 슬러리의 특성이 변화하였으며 분자량이 다른 PVB를 사용하여 성형한 시편을 소결하여 미세구조에 미치는 영향을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1629-1631
• /
• 2007

Significant process in the performance and commercialization of full-color thin-film electroluminescent(EL) displays has been achieved. This is due to the remarkable progress made in the performance of exiting EL phosphors, development of new phosphor materials, and design of new EL phosphor structures. In this paper, we fabricated thinfilm EL devices with ZnS buffer and $BaTiO_3$ electric layer with on top and bottom of phosphor layer. The effect of ZnS and $BaTiO_3$ layer on the luminance of EL device were studied.