• Progress in Superconductivity and Cryogenics
• /
• v.18 no.4
• /
• pp.1-4
• /
• 2016

We investigated the relation between the Cu-O bond length and the superconducting properties of $BaSnO_3$ (BSO)-added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films by using extended x-ray absorption fine structure (EXAFS) spectroscopy. 4 wt.% $BaSnO_3$ (BSO) added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films with varying thickness from $0.2{\mu}m$ to $1.0{\mu}m$ were fabricated by using pulsed laser deposition (PLD) method. The transition temperature ($T_c$) and the residual resistance ratio (RRR) of the GdBCO films increased with increasing thickness up to $0.8{\mu}m$, where the crystalline BSO has the highest peak intensity, and then decreased. This uncommon behaviors of $T_c$ and RRR are likely to be created by the addition of BSO, which may change the ordering of GdBCO atomic bonds. Analysis from the Cu K-edge EXAFS spectroscopy showed an interesting thickness dependence of ordering behavior of BSO-added GdBCO films. It is noticeable that the ordering of Cu-O bond and the transition temperature are found to show opposite behaviors in the thickness dependence. Based on these results, the growth of BSO seemingly have evident effect on the alteration of the local structure of GdBCO film.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.412-421
• /
• 1992

The superconducting thin films have shown a growing possibility for practical application in microelectronic fields in recent years. In this study, the high Tc superconducting Y-Ba-Cu-O thin films were prepared on various substrates by chemical vapor deposition method using organic metal chelates of $Y(thd)_3$, $Ba(thd)_2$, and $Cu(thd)_2$ as source materials. The deposition reactions were carried out on single crystalline MgO(100), YSZ(100), $SrTiO_3(100)$, and polycrystalline $SrTiO_3$ substrates. Deposition thickness of thin films was linearly increased with the increase of deposition time. It turned out that the Y-Ba-Cu-O thin films on MgO(100), YSZ(100), and $SrTiO_3(100)$ single crystal substrates showed superconductivities above liquid nitrogen temperature($T_{c,onset}=87{\sim}89K$, $T_{c,zero}=85{\sim}86K$), but the one on polycrystalline $SrTiO_3$ substrate did not.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.76-79
• /
• 2000

The effect of Ba substitution for Sr on the lattice parameters and the temperature dependence of the thermoelectric power and electrical resistivity has been investigated for Y(Sr$_{2-x}$Ba$_x$)Cu$_{2.7}$Mo$_{0.3}$O$_z$ (x=0${\sim}$2.0). Both a and c lattice parameters increase as the Ba content, x increases. The correlation between Tc and the carrier concentration estimated from the thermoelectric power data indicates that the change of hole concentration is negligible for x ${\le}$ 1.0 in contrast to the large change for x > 1.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.359-363
• /
• 1987

Sonic waves (50KHz) was accelerated the oxidation reaction of primary, benzyl and secondary alcohol with $BaMnO_4\;and\;KMnO_4-CuSO_4{\cdot}5H_2O$ to give the corresponding aldehyde and ketone at $30^{\circ}C/1$ atm. in high yields compared to stirring or refluxing condition.

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.75-75
• /
• 2002

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1999.10a
• /
• pp.16-16
• /
• 1999

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.05a
• /
• pp.152-152
• /
• 1996

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2559-2562
• /
• 2009

The lattice vibration and crystal structure of alkaline earth metal-substituted $RuSr_{1.9}A_{0.1}GdCu_{2}O_{8}$ (A = Ca, Sr, and Ba) have been investigated with micro-Raman spectroscopy. The present $RuSr_{1.9}A_{0.1}GdCu_{2}O_{8}$ materials show not only several weak Raman peaks corresponding to the vibrations of $O_{Cu}$ and $O_{Ru}$ but also strong characteristic phonon lines related to $O_{Sr}$ vibration mode. A comparison between the frequency of $O_{Sr}$ vibration and the bond distances of (Ru$O_{Sr}$) and (Cu‒$O_{Sr}$) in the present ruthenocuprates reveals that the vibration energy of $O_{Sr}$ is mainly dependent on the bond distance of (Ru‒$O_{Sr}$). The peak splitting of the $O_{Sr}$ phonon lines was observed for the unsubstituted $RuSr_{1.9}A_{0.1}GdCu_{2}O_{8}$, suggesting the existence of two different (Ru‒$O_{Sr}$) bond distances. Such a peak splitting caused by the appearance of low-energy shoulder reflects the presence of internal charge transfer pathway from the $RuO_2$ plane to the superconductive $CuO_2$ one. After the substitution of Sr with Ca or Ba, the low-energy shoulder peak of $O_{Sr}$ vibration becomes suppressed, underscoring the depression of internal charge transfer between the $RuO_2$ and $CuO_2$ planes. The weakened role of $RuO_2$ layer as charge reservoir in the $RuSr_{1.9}A_{0.1}GdCu_{2}O_{8}$8 (A = Ca, Ba) would be responsible for the depression of $T_c$ upon the Ca/Ba substitution.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.79-87
• /
• 1998

Melt spun YbBa2Cu3Agx(x=0, 5, 12, 16 and 53) precursor alloy ribbons were oxidized at 263-330$^{\circ}C$ and treated at 820$^{\circ}C$, 855$^{\circ}C$ and 885$^{\circ}C$ under 1.0 atm oxygen pressure. In the ribbons treated at 820$^{\circ}C$, 855$^{\circ}C$and 885$^{\circ}C$ 1-2-4 phase (YbBa2Cu4O8) and 1-2-3 phase (YbBa2Cu3O{{{{ OMICRON _7-$\delta$ }})were formed respectively. The shape of 1-2-4 phase was distorted or ellipsoid. The 2-4-7 and 1-2-3 phases tooked the shape of bar. All the ribbons showed zero critical current density Jc at 77K in zero magnetic field. By considering the shape and the highest critical temperature (among the three phases) of the 1-2-3 phase we tried to increase the critical current density of the ribbons treated at 885$^{\circ}C$ by press deformation. About tenribbons were stacked and coupled by press deformation and then treated at 885$^{\circ}C$ These 1-2-3 phase did not show any texture in any of the ribbons. However they exhibited weak texture in the multilayered specimens. Among the multilayered specimens YbBa2Cu3Ag16 exhibited a Jc of 180 A/cm2 Among the above ribbons YbBa2Cu3Ag16 ribbon has the optimum composition to produce textured superconducting oxide with improved Jc by press deformation. Onset critical temperatures Ton of the multilayered YbBa2Cu3Agx(x=5, 12, 16 and 53) were measured as 88-90 K.

• Journal of the Korean Ceramic Society
• /
• v.28 no.12
• /
• pp.1005-1011
• /
• 1991

Y-Ba-Cu-O thin films were in-situ fabricated on LaAlO3(100) substrates using the second harmonics of a pulsed Nd:YAG laser. Thin films were deposited under 200 (mtorr) of oxygen atmosphere, when the substrate temperature was changed between 67$0^{\circ}C$ and 82$0^{\circ}C$. After deposition, the films were in-situ annealed at 50$0^{\circ}C$ under 2/3 bar of oxygen pressure. We showed that the deposition temperature affects the formation of superconducting phase, the resistance, and the surface morphology. The Y-Ba-Cu-O thin films deposited at 76$0^{\circ}C$ show the zero resistance critical temperature of 85 K.