• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.83-89
• /
• 1995

YBa2Cu3O7-$\delta$, Y2BaCuO5, and binary compounds in the Ba-Cu-O system with the nominal composition of Ba2CuO3, BaCuO2, Ba3Cu4O7, Ba3Cu5O8 were synthesized to investigate the heat evolutions and crystalline phases in the hydration reaction of orthorhombic YBa2Cu3O7-$\delta$ phase. The observed crystalline phases were YBa2Cu3O7-$\delta$, Y2BaCuO5, and BaCuO2, or Ba2Cu3O5＋x, and some amount of noncrystalline phase in the Ba-Cu system comounds. In contact with distilled water, YBa2Cu3O7-$\delta$ and Y2BaCuO5 did not have considerable heat liberation, but in the binary compounds of the Ba-Cu-O system, the amount of total heat liberation was increased with respect to the Cu content. It might be that the reaction of high temperature superconductor YBa2Cu3O7-$\delta$ with water and/or moisture originated from the unusual oxidation state of Cu ion and the presence of amorphous Ba-Cu oxide compound. The degradation of high Tc superconductor by moisture and water could be controlled by restricting the heterogeneous distribution of Tc comlposition and the formation of second phase, such as stable Y2BaCuO5, and the resulting unstable Ba-Cu oxide compound.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.543-546
• /
• 2004

The melting temperature and critical temperature(Tc) of $YBa_2Cu_3O_x$ with deferent content impurities of PbO and $BaPbO_3$ were studied. When the PbO was used as addition in $YBa_2Cu_3O_x$, although the melting point could be reduced, the superconductivity(the transition width, ${\Delta}T_c$) became poor. From the XRD pattern of the sintered mixture of $YBa_2Cu_3O_x$ and PbO it was known that there is a reaction between $YBa_2Cu_3O_x$ and PbO, and the product is $BaPbO_3$. In the process of the reaction the superconducting phase of $YBa_2Cu_3O_x$ was decreased and in the sample $BaPbO_3$ became the main phase. Therefore the superconductivity was reduced. $BaPbO_3$ was chosen as the impurity for the comparative study. The single phase BaPbO3 was synthesized by the simple way from both mixtures of $BaPbO_3$ and PbO, $BaPbO_3\;and\;PbO_2$. Deferent contents of $BaPbO_3$(10%, 20%, 30%) were added in the $YBa_2Cu_3O_x$. By the phase analysis in the XRD patterns it was proved that there werenot reactions between $YBa_2Cu_3O_x$ and $BaPbO_3$. When $BaPbO_3$ was used as impurity in $YBa_2Cu_3O_x$ the superconductivity was much better than PbO as impurity in $YBa_2Cu_3O_x$. But the melting point of $YBa_2Cu_3O_x$ with $BaPbO_3$ could not be found when the temperature was lower than $1000^{\circ}C$ in the DTA measurement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.49-53
• /
• 1997

In this paper, YbBa$_{2}$Cu$_{3}$O$_{x}$ superconductor was sintered by means of conventional solid reaction and the textured YbBa$_{2}$Cu$_{3}$O$_{x}$ was prepared by the Melted-Condensed Process in which SmBa$_{2}$Cu$_{3}$O$_{x}$ crystal was used as seed crystal to introduce the YbBa$_{2}$Cu$_{3}$O$_{x}$ crystal growth. The texture of YbBa$_{2}$Cu$_{3}$O$_{x}$ was examined by X-ray diffraction, and the fracture of YbBa$_{2}$Cu$_{3}$O$_{x}$ sample was observed by SEM, which proved the sample was well oriented. After oxygen absorption of the textured YbBa$_{2}$Cu$_{3}$O$_{x}$ sample, it's critical temperature was measureed to be 86K.eed to be 86K.

• 한국결정성장학회지
• /
• 제28권1호
• /
• pp.21-27
• /
• 2018

본 연구에서는 $Cu-BaFe_{12}O_{19}$계 강자성 복합재료를 제조하기 위하여 실온 기계적 합금화법(MA)을 적용하였다. 실험에서는 성분원소의 무게비를 각각 $Cu:BaFe_{12}O_{19}=4:1$, 3 : 2, 2 : 3 및 1:4으로 실시하였다. 모든 조성의 혼합분말에서 80분 동안 MA 처리에 의하여 금속 Cu에 $BaFe_{12}O_{19}$ 가 분산된 $Cu-BaFe_{12}O_{19}$ 복합재료를 제조할 수 있었다. Cu 및 $BaFe_{12}O_{19}$의 MA 처리 중 강자성 복합재료의 생성과정은 X선 회절분석 및 자기특성의 측정으로부터 자세히 관찰할 수 있었다. MA 처리로 얻어진 $Cu-BaFe_{12}O_{19}$ 복합재료의 자화값은 $BaFe_{12}O_{19}$ 양의 증가와 함께 점점 증가하였으며, 보자력 값은 모든 조성에서 MA 처리에 따른 $BaFe_{12}O_{19}$ 분말입자의 미세화에 따라 점점 감소됨을 알 수 있었다. 한편 $Cu:BaFe_{12}O_{19}=4:1$ 및 3 : 2 조성의 혼합분말의 경우 80분 동안 MA 처리하여 얻어진 $Cu-BaFe_{12}O_{19}$ 강자성 복합재료의 보자력 값이 각각 1400 Oe 및 1450 Oe로 여전히 높은 값을 보이는 사실로부터 Cu rich 조성 혼합분말의 경우 MA 처리 과정 중 강자성 $BaFe_{12}O_{19}$ 분말의 입자미세화가 연성 Cu의 존재에 의하여 크게 억제되어 비교적 큰 보자력 값을 보이는 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제11권6호
• /
• pp.493-501
• /
• 1998

$YBa_2Cu_3O_X$ samples were fabricated by MPMG(Melt Powdered Melt Growth). Intitial composition of the mixed powders were prepared as follow ; $YBa_2Cu_3O_X$ : $Y_2BaCuO_5$ = 1:0, 1:0.2, 1:0.3, 1:0.4. After the first melt and cooling, 5wt% to 20wt% fo Ag power was added to the powder. Effects of the different initial $Y_2BaCuO_5$ and Ag addition amount on $J_c$ and magnetization of $YBa_2Cu_3O_X$ fabricated by MPMG method were investigated. The critical current density increased with the amount of $Y_2BaCuO_5$ and Ag. It was also observed that the difference between negative and positive magnetization in the magnetization hysteresis measurement at 77K was larger than the case where $Y_2BaCuO_5$and Ag were not added to the $YBa_2Cu_3O_X$ powders. It is concluded that $Y_2BaCuO_5$ sample with 40wt% amount of $Y_2BaCuO_5$ and 20wt% amount of Ag has not only the largest $J_c$ but also the improved pinning effect.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.423-429
• /
• 1990

YBa2Cu3Ox ceramics superconductors fabricated using solid state reaction usually contain second phases, such as BaCuO2 and CuO. These second phases are located long the grain boundaries and enhance the abnormal growth of YBa2Cu3Ox grains and, consequently, generate the microcracks. These second phaases were reduced by adding Y2BaCuO5 into solid state reacted YBa2Cu3Ox ceramics. Y2BaCuO5 reacts with grain boundary second phases and reduces the grian size of the ceramics. It was observed the critical current density was improved by adding Y2BaCuO5 into solid state reacted YBa2Cu3Ox ceramic superconductor.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.57-59
• /
• 2004

The melting temperature and critical temperature (Tc) of YBa$_2$Cu$_3$Ox with deferent content impurities of PbO and BaPbO$_3$ were studied. When the PbO was used as addition in YBa$_2$Cu$_3$Ox, although the melting point could be reduced, the superconductivity (the transition wide, ΔTc) became poor. From the XRD pattern of the sintered mixture of YBa$_2$Cu$_3$Ox and PbO it was known that there is a reaction between YBa$_2$Cu$_3$Ox and PbO, and the product is BaPbO$_3$. In the process of the reaction the superconducting phase of YBa$_2$Cu$_3$Ox was decreased and in the sample BaPbO$_3$became the main phase. Therefore the superconductivity was reduced. BaPbO$_3$was chosen as the impurity for the comparative study. The single phase BaPbO$_3$was synthesized by the simple way from both mixtures of BaPbO$_3$and PbO, BaPbO$_3$and PbO$_2$. Deferent contents of BaPbO$_3$(10%, 20%, 30%) were added in the YBa$_2$Cu$_3$Ox. By the phase analysis in the XRD patterns it was proved that there were not reactions between YBa$_2$Cu$_3$Ox and BaPbO$_3$. When BaPbO$_3$was used as impurity in YBa$_2$Cu$_3$Ox the superconductivity was much better than PbO as impurity in YBa$_2$Cu$_3$Ox But the melting point of YBa$_2$Cu$_3$Ox with BaPbO$_3$could not be found when the temperature was lower than 1000 $^{\circ}C$ in the DTA measurement.

• 동굴
• /
• 제78호
• /
• pp.17-22
• /
• 2007

The melting temperature and critical temperature (Tc) of $YBa_2Cu_3O_x$ with deferent content impurities of PbO and $BaPbO_3$ were studied. When the PbO was used as addition in $YBa_2Cu_3O_x$, although the melting point could be reduced, the superconductivity (the transition wide, ${\Delta}T_c$) became poor. From the XRD pattern of the sintered mixture of $YBa_2Cu_3O_x$ and PbO it was known that there is a reaction between $YBa_2Cu_3O_x$ and PbO, and the product is $BaPbO_3$. In the process of the reaction the superconducting phase of $YBa_2Cu_3O_x$ was decreased and in the sample $BaPbO_3$ became the main phase. Therefore the superconductivity was reduced. $BaPbO_3$ was chosen as the impurity for the comparative study. The single phase $BaPbO_3$ was synthesized by the simple way from both mixtures of $BaCO_3$ and PbO, $BaCO_3$ and $PbO_2$. Deferent contents of $BaPbO_3$ (10%, 20%, 30%) were added in the $YBa_2Cu_3O_x$. By the phase analysis in the XRD patterns it was proved that there were not reactions between $YBa_2Cu_3O_x$ and $BaPbO_3$. When $BaPbO_3$ was used as impurity in $YBa_2Cu_3O_x$ the superconductivity was much better than PbO as impurity in $YBa_2Cu_3O_x$. But the melting point of $YBa_2Cu_3O_x$ with $BaPbO_3$ could not be found when the temperature was lower than $1000^{\circ}C$ in the DTA measurement.

• 한국재료학회지
• /
• 제6권2호
• /
• pp.228-234
• /
• 1996

BzCuO2 의 생성 자유에너지를 이중 이온교환된 Ba2+-$\beta$/$\beta$"-AI2O3를 전해질로 사용하여 다음과 같은 생성셀로부터 측정하였다. Au(po2=10-3)/Au+BaCuO2+CuO// Ba2+-$\beta$/$\beta$"-Au이 갈바닉셀에서 BzCuO2 의 임의의 생성식과 생성자유에너지는 다음과 같다. BaO+CuO=BaCuO2 $\Delta$fGo/kJ.mol-1=-77.3-3.3x10-3T/K.3x10-3T/K.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.351-354
• /
• 1998

The formation of the $YBa_2Cu_30_{7_\delta}$(Y123) thick films has been investigated by a surface diffusion Imcess between $3BaCu0_2$+2CuO composite coating powder and a $Y_2BaCuO_5$(Y211). This reaction has been studied in the temperature of $930^{\circ}C$ and $940^{\circ}C$ for 2h to 10h in an oxygen atmosphere. The Y211 substrates becomes covered by co-precipitation of Y123 grains and CuO inclusions. X-ray diflractotnctn. revealed that the lager consisted of an orthorhombic crystal structure. The maximum Jc of $400A/\textrm{cm}^2$ is abtained when the specimen was heat-treated at $930^{\circ}C$ for 6h on the Y211 substrate.