• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.189-194
• /
• 1999

Crystallization of glasses in the system (Ca, Sr, Ba)$O-Al_2O_3-B_2O_3-SiO_2-TiO_2$ and dielectric properties of crystallized glasses were investigated. As increasing B2O3 content and decreasing SiO2 content in the glass, the major crystalline phase changed from $(Sr, Ba)_2TiSi_2O_8$ to (Ca, Sr, Ba)TiO3, the dielectric constant of crystallized glasses increased and the Temperature Coefficient of Capacitance (TCC) changed to negative. The dielectric constant and TCC was estimated for (Sr, Ba)2TiSi2O8 phase as 18 and -440 $ppm/^{\circ}C$, respectively and for (Ca, Sr, Ba)TiO3 phase as 307 and -1900 $ppm/^{\circ}C$, respectively. The dielectric properties of (Ca, Sr, Ba)TiO3 phase (in this study) were similar to those of (Ca, Ba) TiO_3 solid-solution^12)$, but $(Sr, Ba)_2TiSi_2O_8$ phase (in this study) and $Sr_2TiSi_2O_\;8^4$ showed the different properties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1453-1455
• /
• 1998

$Ba(Mg,Ta)O_3-Ba(Co,Nb)O_3$ ceramics were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of 1500-$1575^{\circ}C$ for 5[hr.] in air. The crystal structure was investigated by the XRD. The microstructure of the ceramics were observed by SEM. The microwave properties of dielectric resonators were investigated as a function of composition and sintering temperature. $Ba(Mg,Ta)O_3-Ba(Co,Nb)O_3$ ceramics have a structure of complex perovskite type, and have peaks of (101),(102),(201),(202) and (212). In the case of the $0.7Ba(Mg,Ta)O_3-0.3Ba(Co,Nb)O_3$ ceramic resonator, dielectric constant, quality factor and temperature coefficient of resonant frequency(TCRF, ${\tau}_l$) were a good value of 26.5, 11.500 at 10[GHz] and -1.3[ppm/$^{\circ}C$] from $25^{\circ}C$ to $60^{\circ}C$, respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 추계학술발표강연 및 논문개요집
• /
• pp.23-23
• /
• 1999

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 춘계학술발표강연 및 눈문개요집
• /
• pp.149-149
• /
• 1999

• 한국재료학회지
• /
• 제21권9호
• /
• pp.509-514
• /
• 2011

In this study, optical emission spectroscopy was used to monitor the plasma produced during the RF magnetron sputtering of a $BaTiO_3$ target. The intensities of chemical species were measured by real time monitoring with various discharge parameters such as RF power, pressure, and discharge gas. The emission lines of elemental and ionized species from $BaTiO_3$ and Ti targets were analyzed to evaluate the film composition and the optimized growth conditions for $BaTiO_3$ films. The emissions from Ar(I, II), Ba(I, II) and Ti(I) were found during sputtering of the $BaTiO_3$ target in Ar atmosphere. With increasing RF power, all the line intensities increased because the electron density increased with increasing RF power. When the Ar pressure increased, the Ba(II) and Ti(I) line intensity increased, but the $Ar^+$ line intensity decreased with increasing pressure. This result shows that high pressure is of greater benefit for the ionization of Ba than for that of Ar. Oxygen depressed the intensity of the plasma more than Ar did. When the Ar/$O_2$ ratio decreased, the intensity of Ba decreased more sharply than that of Ti. This result indicates that the plasma composition strongly depends on the discharge gas atmosphere. When the oxygen increased, the Ba/Ti ratio and the thickness of the films decreased. The emission spectra showed consistent variation with applied power to the Ti target during co-sputtering of the $BaTiO_3$ and Ti targets. The co-sputtered films showed a Ba/Ti ratio of 1.05 to 0.73 with applied power to the Ti target. The films with different Ba/Ti ratios showed changes in grain size. Ti excess films annealed at $600^{\circ}C$ did not show the second phase such as $BaTi_2O_5$ and $TiO_2$.

• 한국자기학회지
• /
• 제12권5호
• /
• pp.195-200
• /
• 2002

각종 산화물을 첨가하여 Co$_2$Z type Ba-ferrite의 저온소결에 관하여 연구하였다. Co$_2$Z type Ba-ferrite 상은 2회 하소과정을 통하여 얻을 수 있었으며, 생성된 상의 XRD peaks는 일부 minor peaks 제외하고는 standard peaks와 거의 일치하였다 제조된 분말은 저온소결을 위하여 ZnO-B$_2$O$_3$ glass리 단독 첨가 및 CuO 또는 Bi$_2$O$_3$와 복합 첨가하였으며, 또한 ZnO-Bi$_2$O$_3$ glass를 단독 첨가하였다. 소결은 900~100$0^{\circ}C$에서 수행하였다. ZnO-B$_2$O$_3$ glass의 단독 첨가 시, 첨가량이 7.5 wt%일 때 가장 높은 수축거동을 나타내었다. ZnO-Bi$_2$O$_3$ glass와 CuO 또는 Bi$_2$O$_3$를 복합 첨가하였을 때, glass를 단독 첨가하였을 경우보다 수축률이 급격히 증가되었다. 또한 ZnO-Bi$_2$O$_3$ glass를 단독 첨가한 시편의 수축률과 초기 투자율은 ZnO-B$_2$O$_3$ glass를 단독 첨가한 시편보다 높은 값을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.12-12
• /
• 2009

We weal know that PbO was poisonous and prone to volatilize, then to pollute the circumstance and hurt to people, so we should dope other innocuous additives instead of lead to increase Tc of composite PTC material. In order to prepare lead-free $BaTiO_3$-based PTC with middle Curie point, the incorporation on $(BaNaK)(TiNb)O_3$ into $BaTiO_3$-based ceramics was investigated on samples containing 0.05, 0.07 and 0.1mol% of $(BaNaK)(TiNb)O_3$. $(BaNaK)(TiNb)O_3$ was compounded as standby material by conventional solid-state reaction technique. The starting materials were $Na_2O_3$,$K_2CO_3$, $BaCO_3$, $TiO_2$ and $Nb_2O_5$ powder, and using solid-state reaction method, too. The microstructure of samples were investigated by SEM, DSC, XRD and dielectric properties. Phase composition and lattice parameters were investigated by X-ray diffraction. Also, we are measure the resistivity of sintered bodies with calcinations condition.

• 자연과학논문집
• /
• 제8권1호
• /
• pp.61-69
• /
• 1995

$BaTiO_3$는 일반적으로 $BaCO_3$와 $TiO_2$의 고상반응으로 얻어지는데 BaO의 활성이 높고 이차상이 생성되므로 순수하게 합성하기가 어렵다. 순수한 $BaTiO_3$를 얻기 위해서 공침법, 가수분해법등이 연구되고 있으나 출발 원료가 비싸고 제조 공정상 문제로 고상반응으로 합성한 것과 별차이가 없다. 그래서 고상반응의 공정을 개선하는 연구가 다시 진행되고 있으며 본 연구에서도 $BaTiO_3$를 고상반응으로 합성할 때 물성에 좋지 않은 영향을 주는 이차상인 $Ba_2TiO_4$의 생성기구를 밝히고, 그것을 조절하려 했다. $BaTiO_3$의 이론조성중 Ba가 과잉인 영역에서는 $Ba_2TiO_4$가 $TiO_2$가 과잉인 영역에서는 $BaTiO_2O_5$와 $BaTiO_3O_7$이 소지의 팽창에 원인이 되었다. 환원에서 소결되는 $CeAIO_3$와 $BaTiO_3$계의 유전체는 공기중에서 $CeAIO_3$가 분해되고 이때 생성되는 $CeO_2$가 $BaTiO_3$의 전기적 물성에 큰 영향을 주었다.

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.92-97
• /
• 2006

Dolomite type $BaSn(BO_3)_2$ ceramics with rhombohedral crystal structure has been synthesized via solid state reaction route. Dielectric properties were measured for the samples sintered at $1050\~1200^{\circ}C$ for 2 h in air. Dielectric constant, loss tangent, and temperature coefficient were increased with sintering temperature due to the evolution of $BaSnO_3$, secondary, phase. Optimum dielectric properties were obtained at the $BaSn(BO_3)_2$ ceramics sintered at $1100^{\circ}C.\;CuO/Bi_2O_3$ was added to $BaSn(BO_3)_2$ ceramics to lower the sintering temperature for LTCC application, then Co and Fe-based coloring agents were added for colorizing the LTCC tape. Typical dielectric properties of $BaSn(BO_3)_2$ ceramics with $5 wt\%\;CuO/Bi_2O_3\;and\;3wt\%$ Co-coloring agent that sintered at $900^{\circ}C$ were $\varepsilon_r=9.89,\;tan{\delta}=0.92\times10^{-3},\;and\;TCC=112ppm/^{\circ}C$. Thus obtained LTCC tape was co-fired with Ag paste for compatibility test and revealed no sign of Ag reaction with the ceramics.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1023-1028
• /
• 1993

To obtain a single phase of Ba2Ti9O20 at lower temperature than previious other researches. We investigated the effect of Zr substitution for predetermined portions of Ti in Ba2Ti9O20. In this study, the four compounds(x=0, 0.028, 0.048, 0.068) of Ba2(Ti1-xZrx)9O20 were prepared by coprecipitation reaction of BaCl2, TiCl4 and ZrOCl2 with (NH4)2CO3 and NH4OH as the coprecipitating agents and pH regulators, in queous solution. Owing to 4.8 mol% addition, the single phase of Ba2Ti9O20 showing high Q was obtained at 115$0^{\circ}C$ which is lower by 25$0^{\circ}C$ than the temperature in case of mechanical mixtures of BaCO3 and TiO2.