• Korean Journal of Weed Science
• /
• v.17 no.4
• /
• pp.368-374
• /
• 1997

Investigated ware the decomposition of mulch paper, weed occurrence, and rice growth and yield in transplanting rice culture with paper mulching in 1996 and 1997. The mulch paper were developed from domestic old corrugated container. In the experiment of 1996 where 25 percent of nitrogen fertilizer was applied as tillering fertilizer at 15 days after transplanting, it took about 28 to 40 days for the mulch paper to reach 50 percent decomposition according to types of mulch paper and fertilizer amount. The decomposition was faster in 18kg N/10a fertilization plot than in 12kg N/10a fertilization plot, and slower in the mulch paper treated with polyamidepolyamine epichlorohydrin resin(PPE) for the reinforcement of wet strength than in the mulch paper without PPE. In the experiment of 1997 where nitrogen fertilizer was not applied at tillering stage and instead 70 percent of nitrogen fertilizer was supplied as basal fertilizer, it took more than 42 days for the mulch paper(PPF treated) to reach 50 percent decomposition. Paper mulching was found to be very effective in controlling the paddy weeds at early stage of rice growth, but the efficacy, of weed control decreased especially in the mulch paper without PPE at later stage of rite growth due to the occurrence of Ludwigia prostrata in 1996. Few weeds occurred even in non-mulched plot without herbicide in 1997, rending difficulties in evaluating the efficacy of mulch paper in weed control, However, it could be deduced from the durability of mulch paper that paper mulching would have had sufficient efficacy of weed control. Rice yield was only 185kg/10a in the plot without mulching and weed control, but 657kg/10a and 771kg/10a in the paper(PPE treated) mulching plot with 12kgN/10a and 18kgN/10a, respectively, in 1996. The paper mulching plot showed rice yield similar to the weed control plot with herbicide in 1997. It would be concluded that paper mulching could ensure effective weed control and as high yield as the conventional rice cultivation with herbicidal weed control if the corresponding amount of basal nitrogen fertilizer is increased instead of omitting the nitrogen fertilizer at tillering stage.

• Journal of Life Science
• /
• v.20 no.3
• /
• pp.336-344
• /
• 2010

To assess population structure and genetic diversity among the Pacific cod (Gadus macrocephalus), we investigated mtDNA COI gene sequences of 7 populations. Samples were obtained from Sokcho, Wolsung, Geojedo, Yeosu, Geomundo and Westsouth in 2008 and 2009 (n=28). The sequence analysis of 28 individual samples showed 8 haplotypes, ranging in sequence divergence by pairwise comparisons from 0.2 to 2.2% (1 bp-11 bp). The Gal haplotype was found in Wolsung, Geojedo, Yeosu, Geomundo and Westsouth, and was regarded as the main haplotype of Korean Pacific cod. Ga2, Ga3, Ga6 and Ga7 haplotypes were found only in Sokcho. In the PHYLIP analysis, 8 haplotypes formed two independent groups: cladeA consisted of Ga2, Ga3, Ga6 and Ga7 haplotypes, whereas cladeB contained Gal, Ga4, Ga5 and Ga8 haplotypes. The genetic relationship between the two groups was weakly supported by bootstrap analysis(<50%). In pairwise comparisons between 6 populations other than that from Sokcho, a very high per generation migration ratio ($N_m$=infinite) and a very low level of geographic distance ($F_{sr}=-0.0123-(-0.0423)$) were observed. The estimates of genetic distance between Sokcho and the other localities were all statistically significant (p<0.05, p<0.01, p<0.001), indicating a limited mtDNA-based gene flow between Sokcho and other regions. The finding of the lowest genetic diversity in the Sokcho population (nucleotide diversity=0.00589) may be a result of relatively small population size and interrupted gene flow to other localities. Consequently, the overall considerable migration of Pacific cod population in Korea caused a genetically homogeneous structure to form, although a distinct population was found in this study.

• Journal of Life Science
• /
• v.23 no.3
• /
• pp.389-398
• /
• 2013

Platycodin D is a major constituent of triterpene saponins, which is found in the root of Platycodon grandiflorum, Platycodi Radix, which is widely used in traditional Oriental medicine for the treatment of many chronic inflammatory diseases. Several pharmacological effects of this compound have been reported recently, such as anti-inflammation, immunogenicity, anti-adipogenesis, lowered cholesterol, and anti-cancer activity. However, the mechanism by which this action occurs is poorly understood. In this study, we found that platycodin D greatly increased the potential of the anti-proliferative effect in various cancer cell lines. Our data revealed that platycodin D treatment resulted in a time- and concentration-response growth inhibition of U937 cells by inducing apoptosis, as evidenced by the formation of apoptotic bodies, chromatin condensation, and the accumulation of cells in the sub-G1 phase. Apoptosis induction of U937 cells by platycodin D correlated with an increase in the Bax/Bcl-2 ratio and caused the down-regulation of IAP family members. In addition, platycodin D treatment resulted in proteolytic activation of caspase-3, the concomitant degradation of poly(ADP-ribose) polymerases, and the collapse of the mitochondria membrane potential (${\Delta}{\Psi}_m$). However, the cytotoxic effects induced by platycodin D treatment were significantly inhibited by z-DEVD-fmk, a caspase-3 inhibitor, which demonstrated the important role that caspase-3 played in the observed cytotoxic effect. These findings suggest that platycodin D may be a potential chemotherapeutic agent for use in the control of human leukemia U937 cells. These findings also provided important new insights into possible molecular mechanisms of the anti-cancer activity of platycodin D.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.361-367
• /
• 1984

In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.97-106
• /
• 1984

The Antarctic krill, Euphausia superba, is drawing attention over the world as the largest source of unutilized proteins in the ocean. For the use of krill as a human food, processing conditions of krill sauce by autolysis and/or commercial proteolytic enzyme digestion were examined. The krill was chopped and mixed with equal weight of water, and hydrolyzed by autolysis and/or commercial proteolytic enzyme digestion. The optimal conditions for hydrolysis of krill were $52.5^{\circ}C$, pH 7.0-7.5, 3 hours by autolysis, $52.5^{\circ}C$, pH 6.3, 3hours by bromelain (0.5 %) digestion, and $52.5^{\circ}C$, pH 7.0-7.5, 3 hours by commercial complex enzyme (5 %) digestion, respectively The maximum hydrolyzing rate of protein were 83.2 % by autolysis, 89.7 % by bromelain digestion, 92.7 % by commercial complex enzyme digestion. After krill meat hydrolyzed by autolysis at optimum condition, inactivated at $100^{\circ}C$ for 20 minutes and filtered with Buchner funnel. Two kinds of products were prepared with krill hydrolysate and preservatives: one contained 10 % of sodium chloride and 0.06 % of benzoic acid and the other 10 % of sodium chloride and 3 % of ethyl alcohol. These products were filled in the sterilized glass bottle and sealed. The pH, volatile basic nitrogen, amino nitrogen, color value (L, a and b values) and viable counts of bacteria were determined during storage at $37^{\circ}C$. The results showed that the products could be preserved in good condition during one month at $37^{\circ}C$. As a method to reduce the sodium level in krill sauce, it is convinced that sodium chloride could be replaced half in partially by potassium chloride. In the products prepared from krill by autolysis, bromelain or commercial complex enzyme digestion, hypoxanthine and 5'-IMP were abundant among the nucleotides and their related compounds as 15.3-20.4 ${\mu}mole/g$, dry solid, 2.2-2.5 ${\mu}mole/g$, dry solid, respectively. The abundant free amino acids were lysine, leucine, proline, alanine and valine. The contents of these amino acids were 67.4 %, 69.4 %, 69.8 % of the total free amino acids of each products. And TMAO, betaine and total creatinine were low in contents. The flavor of krill sauce prepared from krill by autolysis or enzyme digestion was not inferior to that of traditional Kerean soy sauce by sensory evaluation.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.116-122
• /
• 2010

A $Cu_3Si$ film electrode is obtained by Si deposition on a Cu foil using DC magnetron sputtering, which is followed by annealing at $800^{\circ}C$ for 10 h. The Si component in $Cu_3Si$ is inactive for lithiation at ambient temperature. The linear sweep thermammetry (LSTA) and galvano-static charge/discharge cycling, however, consistently illustrate that $Cu_3Si$ becomes active for the conversion-type lithiation reaction at elevated temperatures (> $85^{\circ}C$). The $Cu_3Si$ electrode that is short-circuited with Li metal for one week is converted to a mixture of $Li_{21}Si_5$ and metallic Cu, implying that the Li-Si alloy phase generated at 0.0 V (vs. Li/$Li^+$) at the quasi-equilibrium condition is the most Li-rich $Li_{21}Si_5$. However, the lithiation is not extended to this phase in the constant-current charging (transient or dynamic condition). Upon de-lithiation, the metallic Cu and Si react to be restored back to $Cu_3Si$. The $Cu_3Si$ electrode shows a better cycle performance than an amorphous Si electrode at $120^{\circ}C$, which can be ascribed to the favorable roles provided by the Cu component in $Cu_3Si$. The inactive element (Cu) plays as a buffer against the volume change of Si component, which can minimize the electrode failure by suppressing the detachment of Si from the Cu substrate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.414-418
• /
• 2007

The physicochemical characteristics and sensory properties of Deodeok wine, formed by leaching of Deodeok at room temperature for 180 days, were investigated over the following range of Deodeok levels: 10, 15 and 20% (all w/v). The higher the level of Deodeok, the greater were the final values of total sugars, reducing sugars, total polyphenols, and crude saponins. The Hunter's b-value (yellowness) of Deodeok wine varied markedly with Deodeok levels, and yellowness was highest in Deodeok wine containing 20% (w/v) Deodeok. Non-volatile compounds, that form the basis of the liquor tax law, were 0.64, 1.38 and 2.11% (all w/v), respectively, at day 160. Of these values, that of 2.11% (w/v), the level of non-volatile compounds in Deodeok wine containing 20% (w/v) Deodeok, was in accord with the liquor tax law (that requires this figure to be 2.0%). Sensory evaluation showed that Deodeok wine containing 20% (w/v) Deodeok was superior to the other wines tested.

• Proceedings of the EASDL Conference
• /
• 2004.10a
• /
• pp.107-129
• /
• 2004

Sesame oil has been popular for hundreds of years in Korea because of its pleasant flavor and health benefits and has been studied for its antioxidant properties and flavor preferences attributed to its manufacturing methods. The objective of this study was to investigate the qualitative properties of six commercial sesame oils (3 Korean, 2 Japanese, 1 Chinese), The fatty acids in the oil are composed of two main acids oleic acid and linoleic acid with a P/S ratio of 4.99${\sim}$5.73. Of the tocopherol isomers, ${\gamma}$-toc ranged from 23.14 to 34.85mg/100g. Lignan such as sesamin(322.91${\sim}$689.39ppm) and sesamolin (62.19${\sim}$289.82 ppm) is found predominantly in sesame oil. Sesamol (8.52${\sim}$51.21 ppm) was significantly different depending on manufacturer, observed as greatest in the Korean and least in the Japanese products. The induction period was longest in order of the Korean, Chinese, and then Japanese product. The red and yellow values in Lovibond color were highest in the Korean and lowest in the Japanese product. The major volatile compounds (in order of content) were pyrazines, phenols, aldehydes, and then furans and contained a small amount of pyrroles, thiazoles and indoles. The levels of total volatiles were greatest in the Korean and least in the Japanese product. The most abundant volatiles in the Korean product were pyrazines, whereas phenols were higher in the Chinese product compared to the others. From these results, the relationships among pyrazines, sesamol, yellowness and induction period showed positive, respectively. In sensory evaluation, Korean panelists preferred, in order, the Korean, Japanese, and then the Chinese product in strength of and preference for the sesame flavor, also ranking it best in overall acceptance. Japanese panelists found similarities in the Korean and Japanese products and gave an equal level of preference for the sesame flavor and overall acceptance. On the other hand, Chinese panelists preferred the Japanese product in strength and sesame flavor rating it best on overall acceptance.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.77-93
• /
• 1999

This study is aiming at identifying the foreward and backward lingkage effects of the farm land base development project. Korean Government has continuously carried out farmland base development projets including the integrated agricultural development projects. large and medium scale irrigation projects and the comprehensive development of the four big river basin including tidal land reclamation and estuary dam construction for the all weather farming since 1962. the starting year of the five year economic development plans. Consequently the irrigation rate of paddy fields in Korea reached to 75% in 1998 and to escalate the irrigation rate, the Government had procured heavy investment fund from IBRD. IMF and OECF etc. To cope with the agricultural problems like trade liberalization in accordance with WTO policy, the government has tried to solve such problems as new farmland base development policy, preservation of the farmland and expansion of farmland to meet self-sufficiency of foods in the future. Especially, farmland base development projects have been challanged to environmental and ecological problems in evaluating economic benefits and costs where the value of non-market goods have not been included in those. Up to data, in evaluating benefits and costs of the projects, farmland base development projects have been confined to direct incremental value of farm products and it's related costs. Therefore the projects'efficiency as a decision making criteria has shown the low level of economic efficiencies. In estimating economic efficiencies including Leontiefs input-output analysis of the projects could not be founded in Korea at present. Accordingly this study is aimed at achieving and identifying the following objectives. (1) To identify the problems related to the financial supports of the Government in implementing the proposed projects. (2) To estimated backward and foreward linkage effects of the proposed project from the view point of national economy as a whole. To achieve the objectives, Hwangrak benefited area with reservoir which is located in Seosan-haemi Disticts, Chungnam Province were selected as a case study. The main results of the study are summarized as follows : a. The present value of investment and O & M cost were amounted to 3,510million won and the present value of the value added in related industries was estimated at 5.913million won for the period of economic life of 70 years. b. The total discounted value of farm products in the concerned industries derived by the project was estimated at 10,495million won and the foreward and backward linkage effects of the project were amounted to 6,760 and 5,126million won respectively. c. The total number of employment opportunities derived from the related industries for the period of project life were 3,136 man/year. d. Farmland base development projects were showed that the backward linkage effects estimated by index of the sensitivity dispersion were larger than the forward linkage effect estimated by index of the power of dispersion. On the other hand, the forward linkage effect of rice production value during project life was larger than the backward linkage effect e. The rate of creation of new job opportunity by means of implementing civil engineering works were shown high in itself rather than any other fields. and the linkage effects of production of the project investment were mainly derived from the metal and non-metal fields. f. According to the industrial linkage effect analysis, farmland base development projects were identified economically feasible from the view point of national economy as a whole even though the economic efficiencies of the project was outstandingly decreased owing to delaying construction period and increasing project costs.