• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.18-24
• /
• 2007

We report broadband cascode amplifiers of a single-ended and a balanced amplifier for the millimeter-wave applications. The amplifiers were fabricated using 0.1 ${\mu}m\;{\Gamma}-gate$ PHEMT technology on GaAs substrate. The single-ended cascode amplifier was designed and fabricated by using shunt peaking technology. The fabricated single-ended cascode amplifier shows 3 dB bandwidth of 37 GHz($18.5{\sim}55.5$ GHz) and the maximum $S_{21}$ gain of 9.38 dB. The balanced cascode amplifier using tandem couplers achieves 3 dB bandwidth and the maximum $S_{21}$ gain of 44.5 GHz($21{\sim}65.5$ GHz) and 10.4 dB at 60 GHz, respectively. The 3 dB bandwidth of the balanced cascode amplifier shows 20% lager than the single-ended cascode amplifier.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.5
• /
• pp.439-446
• /
• 1985

This study was designed to compare the lipid components among wild and cultured eel, Anguilla japonica, and conger eel, Astroconger myriaster. The lipid components of cultured eel were analyzed and compared with those of wild and conger eel. In the content of total lipid, the lipid content in cultured eel was slightly higher than that in wild one, but 2 times higher than that in conger eel. The lipid contents in edible portion of wild and cultured eel were 5 times higher than those in viscera, but the lipid content in edible portion of conger eel showed a similar trend to that in viscera. In the fatty acid composition of neutral lipid in edible portion, percentages of $C_{14:0},\;C_{16:0}\;and\;C_{18:1}$ in cultured eel were higher than those in wild one, while percentages of $C_{16:1},\;C_{18:2},\;C_{18:3},\;C_{20:4},\;C_{20:5},\;C_{22:5}\;and\;C_{22:6}$ lower, and percentages of $C_{18:0},\;C_{20:4}\;and\;C_{22:6}$ in conger eel were noticeably higher than those in wild and cultured eels. In the case of phospholipid in edible portion, percentages of $C_{18:0}\;and\;C_{18:2}$ in cultured eel were higher than those in wild one, while percentages of $C_{16:0},\;C_{16:1},\;C_{18:1},\;C_{18:3},\;C_{20:4},\;C_{20:5},\;C_{22:5}\;and\;C_{22:6}$ lower. The unsaturation (TUFA/TSFA) of neutral lipid was no significant difference among wild and cultured eel, and conger eel, but that of phospholipid in wild eel was higher than that in cultured eel and conger eel. The essential fatty acid content(TEFA) of neutral lipid in edible portion of wild eel was 3 times higher than that of cultured one. but the TEFA of phospholipid in edible portion was no significant difference among wild and cultured eels, and conger eel. The w3 highly unsaturated fatty acid content (w3 HUFA) of neutral lipid in edible portion of wild eel was 2.0 to 2.5 times higher than that of cultured eel and conger eel, but the w3 HUFA of phospholipid in edible portion of wild eel was noticeably higher than that of cultured eel and conger eel. In the ratio (A/B) of fatty acid content (A) in cultured eel to that (B) in diet, the A/B ratios of $C_{18:2}\;w6,\;C_{18:3}\;w3,\;C_{20:5}\;w3\;and\;C_{22:6}\;w3$ were 0.23 to 0.48 much lower than the other fatty acid. Consequently, it is considered that the ratios of w3 HUFA is related to the biosynthesis of polyenoic acid and growth rate of cultured eel.

• Journal of Aquaculture
• /
• v.9 no.1
• /
• pp.25-42
• /
• 1996

The study has been conducted to know an appropriate feeding strategy and effects of the rearing density on larval growth of the rockfish, Sebastes schlegeli. The results obtained are as fellowed ; 1. Thirty-day-old larvae reached at $25.25{\pm}3.76$ mm in total length and $0.23{\pm}0.07$ g in body weight in experiment A, at which rotifer was provided from the beginning to the end of 30-day experiment, Anemia from 3th to 18th day, and artificial feed from 13th to 30th day after hatching. When rotifer was provided for 30 days, Artemia from 6th to 18th day, and artificial feed from 18th to 30th day after hatching (experiment B), these larvae grew up to $27.52{\pm}2.50$ mm in total length and $0.26{\pm}0.06$ g in body weight. On the other hand, when rotifer and artificial feed were supplied with the same time schedule as shown in experiment B, and Artemia was feed from 6th to 30th day after hatching (experiment C), the total length and body weight of those larvae were $23.22{\pm}3.44$ mm and $0.15{\pm}0.05$ g, respectively. The best result for larval growth was obtained from experiment B. The survival rates estimated were $57.6\%$ in experiment A, $66.4\%$ in experiment B, and $44.4\%$ in experiment C. 2. The growth in total length of the larvae according to their rearing days could be represented by the following equations : Experiment A : Y=4.350+0.116X+$1.887X^2$ (r=0.993) Experiment B : Y=4.500+8.931X+$2.221X^2$ (r=0.994) Experiment C : Y=4.478+5.734X+$1.881X^2$(r=0.990) The average number of Artemia nauplius intaken by the larvae was rapidly increased between 15th and 20th day afer hatching, and 9, 212, 242, 750, and 1,171 nauplius were found in the different sizes of larvae, whose total length were 5.65, 6.81, 9.45, 14.96, and 24.52 mm, respectively. 3. Larval growth in total length and body weight reared at four different densites (A: 1.8 $kg/m^3$, B; 4.0 $kg/m^3$, C; 5.0 $kg/m^3$, D; 6.2 $kg/m^3$) indicated that the best growth was found in experiment A, at which the larval were reared at the lower density and the final survival rates extimated were $92.9\%$ in exp. A, $99.5\%$ in exp. C, $89.0\%$ in exp. B, and $88.2\%$ in exp. D. The amount of production per cubic meter turned out to be 30.45 kg in exp. D, 25.89 kg in exp. C, 20.75 kg in exp. B and 10.48 kg in exp. A. therefore, considering both larval growth and survival rate, higher yields seemed to be attainable at the relatively high-rearing density.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.24-38
• /
• 2006

In this paper, we investigate the design and fabrication of a conical spiral antenna suitable for satellite TT&C applications. The shape of the spiral is optimized using a commercial electromagnetic software for good gain and axial ratio performances over $2.0{\sim}2.3\;GHz$ frequencies. A coaxial infinite balun feeding the spiral is designed using experimental methods. A method for precision fabrication of the spiral is presented. Measurements of the fabricated antenna show satisfactory performances over $2.0{\sim}2.3\;GHz$ such as a reflection coefficient less than -18 dB, a maximum gain greater than 4 dB, a gain greater than 0 dB over angles ${\pm}75^{\circ}$ from the antenna boresight, an axial ratio less than 5 dB over angles ${\pm}90^{\circ}$ from the antenna boresight, a front-back ratio greater than 15 dB.

• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.388-400
• /
• 2008

This paper introduces a cost-effective method fur improving anchor picture quality of a multiview video coding scheme that is mainly based on chroma compensation. Proposed method is applied to both INTER $16{\times}16$ and SKIP modes in only anchor P-pictures. By testing using JVT common test conditions, simulation results show that proposed method can obtain the average BD-PSNR gains fur U and V as 0.136 dB and 0.127 dB, respectively, while maintaining almost same performance for Y (luminance). For the range of low bit-rates, it is observed that average BD-PSNR gains of Y, U, and V are 0.141 dB, 0.494 dB and 0.525 dB, respectively. Necessary computational complexity is very marginal because the number of anchor P-pictures is only 4.18% in comparison with whole coded sequences, however it can be found that the proposed method can significantly improve the coding efficiencies of color components.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.924-927
• /
• 2017

This paper presents a 6~18 GHz 8-bit true time delay (TTD) circuit. The unit delay circuit is based on m-derived filter with relatively constant group delay. The designed 8-bit TTD is implemented with two single-pole double-throw (SPDT) switches and seven double- pole double-throw (DPDT) switches. The reflection characteristics are improved by using inductors. The designed 8-bit TTD was fabricated using $0.18{\mu}m$ CMOS. The measured delay control range was 250 ps with 1 ps of delay resolution. The measured RMS group delay error was less than 11 ps at 6~18 GHz. The measured input/output return losses are better than 10 dB. The chip consumes zero power at 1.8 V supply. The chip size is $2.36{\times}1.04mm^2$.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.37-43
• /
• 2013

Purpose: PET/CT scan using the SUV (Standardized Uptake Value) of radiopharmaceutical uptake in organs and tissues as an objective indicator makes it possible to analyze physiological and chemical reactions of human organs. This study analyzes the change of the SUV uptake in accordance with the way how PET/CT patients take a rest after the injection of $^{18}F-FDG$ (Fluororo-deoxyglucose). And also subjective satisfaction is assessed listening to music while taking a rest. Materials and Methods: From April 2011 until February 2013, Among the Primary cancer patients who admitted to the Catholic Medical Center (Seoul & Bucheon St. Mary's Hospital) and scanned $^{18}F-FDG$ PET/CT and also received care through the tracking test (mean age $55.61{\pm}12.41$ years, 108 people, 48 men and 60 women) were selected. The patients were divided into two groups. The first group (A: basal study) is requested to take a rest in bed quietly after the injection. However the second one (B: follow up study) is requested to listen to the music while taking a rest. And then SUV analysis was performed respectively. At the end of the scan, ROI (Region Of Interest) were set from the center of the liver (right lobe) and 3 spots of the brain (frontal, temporal, and occipital lobes). And the SUV was calculated. To identify the correlation among those ROIs, paired t-test was performed using SPSS software (Version 12.0K for windows, P>0.05). Also, after the PET/CT scan the satisfaction study was conducted of all the patients. 1:1 questionnaire survey was performed, and that questionnaire was made using the Likert 5-point scale. By utilizing those questionnaires, the analysis about simple frequency, percentage, average, and standard deviation was performed. Results: The SUV change of the 4 designated ROIs in accordance with listening to music was not statistically significant. (Frontal lobe P-value=0.611, Occipital lobe P-value=0.499, Temporal lobe P-value=0.717, Liver P-value=0.334: P-value>0.05) And the satisfaction study indicated that group B was appear to be 0.42 points (5 basis points) higher than group A. It showed that patients are more satisfied in group B than group A. Conclusion: when performing PET/CT scan using $^{18}F-FDG$, listening to music after the injection of the radiopharmaceuticals does not affect the SUV but given the state of the psychological comfort that may increase the patient's satisfaction.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.1
• /
• pp.65-75
• /
• 1999

Purpose: The aim of this study is to demonstrate the feasibility of 2-[fluorine-18] fluoro-2-deoxy-D-glucose (F-18-FDG) whole body scan (FDG W/B Scan) using dual-head gamma camera equipped with ultra high energy collimator in patients with various cancers, and compare the results with those of coincidence imaging. Materials and Methods: Phantom studies of planar imaging with ultra high energy and coincidence tomography (FDG CoDe PET) were performed. Fourteen patients with known or suspected malignancy were examined. F-18-FDG whole body scan was performed using dual-head gamma camera with high energy (511 keV) collimators and regional FDG CoDe PET immediately followed it Radiological, clinical follow up and histologic results were correlated with F-18-FDG findings. Results: Planar phantom study showed 13.1 mm spatial resolution at 10 cm with a sensitivity of 2638 cpm/MBq/ml. In coincidence PET, spatial resolution was 7.49 mm and sensitivity was 5351 cpm/MBq/ml. Eight out of 14 patients showed hypermetabolic sites in primary or metastatic tumors in FDG CoDe PET. The lesions showing no hypermetabolic uptake of FDG in both methods were all less than 1 cm except one lesion of 2 cm sized metastatic lymph node. The metastatic lymph nodes of positive FDG uptake were more than 1.5 cm in size or conglomerated lesions of lymph nodes less than 1cm in size. FDG W/B scan showed similar results but had additional false positive and false negative cases. FDG W/B scan could not visualize liver metastasis in one case that showed multiple metastatic sites in FDG CoDe PET. Conclusion: FDG W/B scan with specially designed collimators depicted some cancers and their metastatic sites, although it had a limitation in image quality compared to that of FDG CoDe PET. This study suggests that F-18-FDG positron imaging using dual-head gamma camera is feasible in oncology and helpful if it should be more available by regional distribution of FDG.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.260-267
• /
• 1992

In this paper, the performance of frequency hopped(FH) M-ary frequency shift keyed(MFSK)system is analyzed with the fading channel and the multione famming. In general, the performance degradation of FH/MFSK system is due to the Rayleigh fading and the multitone jamming environment. In order to improve the system performance. the time diversity is used. When the time diversity is applied to the Rayleigh fading and the mulitone jamming, we get around 18dB and 19dB improvements. respectively. And when it is applied to both the Rayleigh fading and the multitone jamming, we get around 4 dB improvement.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.1
• /
• pp.124-133
• /
• 2003

Ti-25Al-xNb (x=0, 3, 7, 11, 13 at. %) alloys and 18 vol. % TiB/(Ti-25Al-11Nb) metal matrix composite were fabricated by spark plasma sintering process at 900-120$0^{\circ}C$. Microstructural characteristics of the sintered bodies were identified by SEM, EDX analysis, X-ray diffraction, and differential scanning calorimeterric method. $Ti_3Al$ alloy was consisted of equiaxed $\alpha_2$ phase. $Ti_3Al-Nb$ alloys and the matix of TiB/(Ti-25Al-11Nb) metal matrix composite had the morphology that O phase was precipitated at the grain boundary of $\alpha_2$phase. Volume fraction of O phase and hardness were depended on the concentration of Nb in $Ti_3Al-Nb$ alloy, Rule of mixing could be applied to hardness and Young's modulus of 18 vol. % TiB/(Ti-25Al-11Nb) metal matrix composite.