• Journal of Periodontal and Implant Science
• /
• 제49권6호
• /
• pp.355-365
• /
• 2019

Purpose: The modified minimally invasive surgical technique (M-MIST) has been successfully employed to achieve periodontal regeneration. Platelet-rich fibrin (PRF) is known to enhance wound healing through the release of growth factors. This study aimed to observe the outcomes of periodontal surgery when M-MIST was used with or without PRF for the treatment of isolated intrabony defects. Methods: This randomized clinical trial was conducted on 36 systemically healthy patients, who had chronic periodontitis associated with a single-site buccal probing pocket depth (PPD) and clinical attachment level of ≥5 mm. Patients were randomly divided into 2 groups: the test group treated with M-MIST and PRF, and the control group treated with M-MIST alone. The primary periodontal parameters analyzed were PPD, relative attachment level (RAL), and relative gingival margin level. The radiographic parameters analyzed were change in alveolar crest position (C-ACP), linear bone growth (LBG), and percentage bone fill (%BF). Patients were followed up to 6 months post-surgery. Results: Intragroup comparisons at 3 and 6 months showed consistently significant improvements in PPD and RAL in both the groups. In intergroup comparisons, the improvement in PPD reduction, gain in RAL, and the level of the gingival margin was similar in both groups at 3 and 6 months of follow-up. Furthermore, an intergroup comparison of radiographic parameters also demonstrated similar improvements in C-ACP, LBG, and %BF at 6 months of follow-up. Conclusions: M-MIST with or without PRF yielded comparable periodontal tissue healing in terms of improvements in periodontal and radiographic parameters. Further investigation is required to confirm the beneficial effects of PRF with M-MIST.

• 한국환경농학회지
• /
• 제18권3호
• /
• pp.229-235
• /
• 1999

기상조건에 따른 벼 담수직파 재배양식별의 생육 및 수량의 연차간 변화를 밝히고자 호남농업시험장 수도포장(전북통, 미사질양토)에서 동진벼와 농안벼를 1995년과 1996년의 2개년 모두 5월 12일에 파종하여 재배시험을 실시하였다. 직파양식별 입모율은 담수표면산파>담수표면조파>무논골뿌림 순이었으며, 동진벼가 농안벼보다 높았는데, 파종후 입모기간이 저온으로 경과하였던 1995년이 1996년보다 낮았다. 최고분얼기와 유수분화기의 엽면적 및 지상부건물중은 두 품종 모두 1995년에는 담수직파재배가 이앙재배보다 높았으나, 1996년에는 반대경향을 나타냈는데, 생육초기를 저온으로 경과하면 담수직파가 이앙재배보다 생육이 빨랐다. 호흡소모계수는 1995년의 경우 7월 상${\cdot}$중순과 8월하순 및 9월상순에서 평년 또는 1996년보다 높았다. 이 두시기는 절간신장기 및 등숙기에 해당되고 간장(稈長)의 도장(徒長) 및 등숙의 저하를 보였다. 이러한 경향은 이앙재배보다 담수직파 벼에서 뚜렷하였다. 등숙속도는 1995년의 경우 이앙재배가 직파재배보다 느린 경향이었으나 1996년에는 이앙재배가 등숙초기에 빠른 경향이었다. 수당립수(穗當粒數)는 담수직파가 이앙재배보다 많았으나, 등숙비율은 이앙재배에서 높았으며, 쌀 수량도 이앙재배에서 약간 높았다. 쌀수량은 등숙비율이 높은 동진벼가 농안벼보다 높았는데, 특히 농안벼는 담수직파하면 이앙재배보다 출수가 현저히 지연되었으며, 내도복성은 강하나 기상조건이 불량하면 입모율과 등숙율이 떨어졌다.

• Journal of Animal Science and Technology
• /
• 제49권4호
• /
• pp.437-442
• /
• 2007

본 연구는 축산과학원에서 보유중인 듀록 품종내에서 MC4R 유전자의 SNP 발현 특성과 육종가에 의한 선발 후 MC4R 유전자 빈도의 변화 및 경제형질에 대한 유전자형간 육종가의 차이를 구명하고자 수행하였다. 1999년부터 2005년까지 검정된 검정성적을 바탕으로 일당증체량, 등지방두께, 90kg 도달일령 및 사료요구율에 대하여 유전력과 유전상관 및 육종가를 추정하였으며, 2003년과 2004년에 출생한 660두에 대한 혈액을 채취하여 MC4R 유전자에 대한 유전자형 및 대립유전자 분석을 실시하였다. 또한 육종가에 의한 선발 후 유전자의 빈도변화를 세대별 그리고 선발군 및 도태군에 대하여 분석하였으며, 육종가의 분석결과를 이용하여 MC4R의 유전자형 효과를 보았다. 분석결과 육종가를 근거하여 선발한 MC4R 유전자형은 세대당 그리고 선발군과 도태군에서 차이를 보였으며, 각 형질별 육종가의 분산분석결과 사료요구율을 제외한 기타 경제형질에서 유의적으로 MC4R 유전자의 효과가 있는 것으로 나타났다. MC4R 유전자의 효과에 대한 보고는 상이한 부분도 있지만 자체 축군에 대한 다형성 분석 및 경제형질과의 연관성 분석에 의하여 축군 및 개량하고자 하는 경제형질에 따라 표지 유전인자로 활용하여 선발반응 및 정확도를 높일 수 있을 것으로 사료된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.50-50
• /
• 2022

Recently, the use of mulching film has increased in soybean cultivation. Polyethylene (PE) films and biodegradable films (BF) have the advantages of improving soil moisture retention, geothermal maintenance, and CO2 maintenance as well providing weed control. Furthermore, BFs are a material that can compensate for the shortcomings of PE because it has the ability to decompose naturally by soil microorganisms, sunlight, and geothermal heat. Many researches have been carrying out studies regarding the development of BFs for these very reasons. This study was conducted better understand which films are optimal for soybean cultivation after evaluations of soybean growth and film characteristics of various BFs. BFs Farmsbio (Farm Hannong), Heulgro Film (Sejin Bio), Vonto Film (Eco-Hansung), two unnamed biodegradable films (Seojin Bio and Taesung), and a PE film were used in this study. For the control plots, no mulching was used. Experimental fields were fertilized according to conventional cultivation methods, tilled, and then covered with either BFs or PE films. After 1 week, soybean (cv. Daechan) seeds were seeded. Germination rate and plant height were measured at weekly intervals after seeding. In addition, pH, EC, and decomposition and light transmittance levels of films were measured during the experimental period. Daily average temperatures and relative humidity in soils was measured during the experimental period. There was no significant difference in germination rates and plant height in both crops grown with BFs and PE films, but crops grown in the control plot had significantly lower germination rates and growth. Soil pH was not significantly different regardless of treatments (BF, PE, and non-mulching) at 14, 28, and 42 days after seeding. In general, the EC contents in the control plots was lower than in crops grown using BFs and PE films. With the exception of some BFs, light transmittance and decomposition levels of films did not, in general, increase up to 70 days after soybean seeding. Since this study is ongoing, we are continually investigating these parameters. The average daily moisture in soil was higher in crops grown with BFs and PE films than in the control plot. However, the daily average soil temperature was not consistent regardless of treatments. Therefore, the BFs used in this study can be used without negative impacts on soybean growth.

• Journal of Animal Science and Technology
• /
• 제66권1호
• /
• pp.135-144
• /
• 2024

The objective of this study was to investigate the influence of feeding frequency on a sow's reproductive performance and stress response during gestation. A total of twenty multiparous sows (Yorkshire × Landrace) were used in a completely randomized design based on their parity, body weight (BW), and backfat thickness (BFT), and the sows were allotted to two different feeding systems: 1) once daily feeding (OF) and 2) twice daily feeding (TF) in corn-soybean meal based diets. The gestation diet was formulated to contain 3,265 kcal of metabolizable energy (ME) / kg, 12.90% of crude protein (CP), and 0.75 % of total lysine. The lactation diet was formulated to contain 3,265 kcal of ME / kg, 16.80% of CP, and 1.08% of total lysine and provided ad libitum during lactation. In gestation, sow BFT and BF changes were not affected by feeding frequency, but higher BW and BW gain from day 35 to 90 and day 35 to 110 were observed in OF sow (p < 0.10). In lactation, feeding frequency did not influence on BW, BW gain, BFT, BF changes, average daily feed intake, and wean-to-estrus interval. Also, there were no differences in litter size, litter weight and piglet weight in lactating sows. OF sows had higher (p < 0.05; p < 0.10) protein, solid-not-fat, and total solid concentrations in colostrum compared to TF sows, while OF sows had a lower (p < 0.05) lactose concentration in colostrum compared to TF sows. Sows in OF showed significantly lower average daily water consumption (ADWC) from day 35 to 110 of gestation (p < 0.05). While there were no significant differences in stereotypic behaviors and salivary cortisol levels during gestation between treatments, the OF sows showed less time spending on the activity at day 105 (p < 0.05). In conclusion, reduced feeding frequency increased BW gain during gestation, decreased activation time, and changed the colostrum composition. This information may contribute to the understanding of the physiological and behavioral change of gestating sows by manipulating feeding frequency.

• Bulletin of the Korean Chemical Society
• /
• 제26권9호
• /
• pp.1359-1365
• /
• 2005

A series of new chiral [iminophosphoranyl]ferrocenes, {${\eta}^5-C_5H_4-(PPh_2=N-2,6-R_2-C_6H_3)$}Fe{${\eta}^5-C_5H_3-1-PPh^2-2-CH(Me)NMe_2$} (1: R = Me, $^iPr$), {${\eta}^5{-C_5H_4-(PPh_2=N-2,6-R_2}^1-C_6H_3)$}Fe{${\eta}^5-C_5H_3-1-(PPh_2=N-2,6-R_2-C_6H_3)-2-CH(Me)R_2$} (2: $R^1\;=\;Me,\;^iPr;\;R^2\;=\;NMe_2$, OMe), and $({\eta}^5-C_5H_5)Fe${${\eta}^5-C_5H_4-1-PR_2-2-CH(Me)N=PPh_3$} (3:R = Ph, $C_6H_{11}$) have been prepared from the reaction of [1,1'-diphenylphosphino-2-(N,N-dimethylamino) ethyl]ferrocene with arylazides (1 & 2) and the reaction of phosphine dichlorides ($R_3PCl_{2}$) with [1,1'-diphenylphosphino-2-aminoethyl]ferrocene (3), respectively. They form palladium complexes of the type $[Pd(C_3H_5)(L)]BF_4$ (4-6: L = 1-3), where the ligand (L) adopts an ${\eta}^2-N,N\;(2)\;or\;{\eta}^2$-P,N (3) as expected. In the case of 1, a potential terdentate, an ${\eta}^2$-P,N mode is realized with the exclusion of the –=NAr group from the coordination sphere. Complexes 4-6 were employed as catalysts for allylic alkylation of 1,3-diphenylallyl acetate leading to an almost stoichiometric product yield with modest enantiomeric excess (up to 74% ee). Rh(I)-complexes incorporating 1-3 were also prepared in situ for allylic alkylation of cinnamyl acetate as a probe for both regio- and enantioselectivities of the reaction. The reaction exhibited high regiocontrol in favor of a linear achiral isomer regardless of the ligand employed.

• 한국재료학회지
• /
• 제2권4호
• /
• pp.285-292
• /
• 1992

Si(100) 웨이퍼를 사용하여 RTP 장비에서 $O_2$와 $N_2$O 분위기에서 8nm의 oxynitride를 제조 하였다. 기존의 로(furnace) 열산화막과 비교해서 oxynitride는 I-V, TDDB 특성이 우수하였고, flat-band voltage shift도 적었으며 $BF_2이온$ 주입에 의한 붕소 투과 억제 특성도 우수하다. 유전상수는 oxynitride가 열산화막에 비해서 크다. Oxynitride는 순수한 Si$O_2$유사하게 V 〉${\varphi}_0$ 구간에서 Fowler-Nordheim 터널링 특성을 나타낸다. SIMS, AES, 그리고 XPS 분석 결과 질소 pile-up이 Si$O_2$/Si 계면에서 나타나고, 이것은 oxynitride 산화막 특성 향상과 깊은 관련이 있다.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.43-47
• /
• 2003

As and BF$_2$dopants are implanted for the formation of source/drain with dose of 1${\times}$10$^{15}$ ions/$\textrm{cm}^2$∼5${\times}$10$^{15}$ ions/$\textrm{cm}^2$ then formed cobalt disilicide with Co/Ti deposition and doubly rapid thermal annealing. Appropriate ion implantation and cobalt salicide process are employed to meet the sub-0.13 $\mu\textrm{m}$ CMOS devices. We investigated the process results of sheet resistance, dopant redistribution, and surface-interface microstructure with a four-point probe, a secondary ion mass spectroscope(SIMS), a scanning probe microscope (SPM), and a cross sectional transmission electron microscope(TEM), respectively. Sheet resistance increased to 8%∼12% as dose increased in $CoSi_2$$n^{＋}$ and $CoSi_2$$p^{V}$ , while sheet resistance uniformity showed very little variation. SIMS depth profiling revealed that the diffusion of As and B was enhanced as dose increased in $CoSi_2$$n^{＋}$ and $CoSi_2$$p^{＋}$ . The surface roughness of root mean square(RMS) values measured by a SPM decreased as dose increased in $CoSi_2$$n^{＋}$ , while little variation was observed in $CoSi_2$$p^{＋}$ . Cross sectional TEM images showed that the spikes of 30 nm∼50 nm-depth were formed at the interfaces of $CoSi_2$$n^{＋}$ / and $CoSi_2$/$p^{＋}$, which indicate the possible leakage current source. Our result implied that Co/Ti cobalt salicide was compatible with high dose sub-0.13$\mu\textrm{m}$ process.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2325-2332
• /
• 2012

A series $[C_3Omim]$[X] of imidazolium cation-based ILs, with ether functional group on the alkyl side-chain have been synthesized and structure of the materials were confirmed by various techniques like $^1H$, $^{13}C$ NMR spectroscopy, MS-ESI, FTIR spectroscopy and EA. More specifically, the influence of changing the anion with same cation is carried out. The absorption capacity of $CO_2$ for ILs were evaluated at 30 and $50^{\circ}C$ at ambient pressure (0-1.6 bar). Ether functionalized ILs shows significantly high absorption capacity for $CO_2$. In general, the $CO_2$ absorption capacity of ILs increased with a rise in pressure and decreased when temperature was raised. The obtained results showed that absorption capacity reached about 0.9 mol $CO_2$ per mol of IL at $30^{\circ}C$. The most probable mechanism of interaction of $CO_2$ with ILs were investigated using FTIR spectroscopy, $^{13}C$ NMR spectroscopy and result shows that the absorption of $CO_2$ in ether functionalized ILs is a chemical process. The $CO_2$ absorption results and detailed study indicates the predominance of 1:1 mechanism, where the $CO_2$ reacts with one IL to form a carbamic acid. The $CO_2$ absorption capacity of ILs for different anions follows the trend: $BF_4$ < DCA < $PF_6$ < TfO < $Tf_2N$. Moreover, the as-synthesized ILs is selective, thermally stable, long life operational and can be recycled at a temperature of $70^{\circ}C$ or under vacuum and can be used repeatedly.

• Corrosion Science and Technology
• /
• 제6권4호
• /
• pp.177-185
• /
• 2007

The purpose of this study is to evaluate freezing-thawing and surface scaling resistance in order to examine the frost durability of concrete in a chloride-inherent environment. The mixing design for this study is as follows: 3 water binder ratios of 0.37, 0.42, and 0.47; 2-ingredient type concrete (50% OPC concrete and 50% ground granulated blast-furnace slag), and 3-ingredient type concrete (50% OPC concrete, 15% fly ash, and 35% ground granulated blast-furnace slag). As found in this study, the decrease of durability was much more noticeable in combined deterioration through both salt damage and frost damage than in a single deterioration through either ofthese; when using blast-furnace slag in freezing-thawing seawater, the frost durability and surface deterioration resistance was evaluated as higher than when using OPC concrete. BF 50% concrete, especially, rather than BFS35%+FA15%, had a notable effect on resistance to chloride penetration and freezing/expansion. It has been confirmed that surface deterioration can be evaluated through a quantitative analysis of scaling, calculated from concrete's underwater weight and surface-dry weight as affected by the freezing-thawing of seawater.