• Journal of the Korean Ceramic Society
• /
• v.31 no.5
• /
• pp.552-560
• /
• 1994

A composite of TiB2-Al2O3 system was successfully prepared from a mixture of TiO2, B2O3, and Al by self-propagating high temperature synthesis (SHS) with a novel characteristic, utilizing the internal oxidation heat of aluminium metal of the mixture, instead of by a conventional technique, externally heating a mixture of Ti, B and Al2O3. From a mixture with B/Ti molar ratio of =2.0, pure two phases of TiB2 and $\alpha$-Al2O3 with good crystallinity and small, uniform sizes were formed. However, when the B/Ti molar ratio of the mixture goes to a value less than 2.0, in addition to the above main minerals, a small smounts of metastable phases such as TiB and Ti3B4 were formed. It was found that about 60%, the optimum green density of compacts gave their highest reaction rate and temperature during SHS process. TiB2-Al2O3 system composite with B/Ti molar ratio of =2.0 could be pressurelessly sintered even at 190$0^{\circ}C$ under Ar gas flows without any addition of sintering aids, showing their good properties such as 91.2% in relative density, 2750 kgf/$\textrm{mm}^2$ in Vickers hardness and 2620 kgf/$\textrm{cm}^2$ in flexural strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.1
• /
• pp.67-78
• /
• 2001

Market environment of current e-Business is being transfered to B2B from B2C. The objective of this paper is to introduce ERP system as a device of IT(Information Technology) for this B2B. Firstly we proposed the characteristic of ERP and the problem of corporate application. And so, we examined various values and benefits when ERP system is applied to corporate strategy. Finally, in the side of corporate application, we proposed the plan of ERP introduction and the policy support of government. As the further study, empirical analysis and detailed plan must be considered.

• YAKHAK HOEJI
• /
• v.40 no.6
• /
• pp.697-704
• /
• 1996

Quinolone derivatives, SJ5b (ethyl 5,12-dihydro-5-dihydro-5-oxobenzoxazolo[3,2-a]quinoline-6-carboxylate) and SQ7b (3-fluoro-2-(4-methylpiperazin-1-yl)-5.12-dihydro-5-oxobenzoxa zolo[3,2-a]quinoloine carboxylic acid) showed in vitro cytotoxicities against various tumor cell lines. SJ5b and SQ7b completely inhibited the DNA relaxation activities of human placental topoisomerase II at the concentration of 15.63 and 1.95 ${\mu}$g/ml, respectively. However, unlike etoposide which stabilize the topoisomerase II-DNA complex, SQ7b did not cause topoisomerase II-mediated DNA cleavage and SJ5b weakly stabilized the topoisomerase II-DNA cleavable complex. Through both experiments. DNA relaxation assay by the increment of topoisomerase II concentration and DNA unwinding assay, it was shown that SJ5b and SQ7b did not interact with topoisomerase II itself but bound to DNA. Therefore, it was concluded that DNA binding of SJ5b and SQ7b caused the inhibition of topoisomerase II related to DNA relaxation but no or very weak stabilization of topoisomerase II-DNA cleavable complex. In addition, SJ5b and SQ7b prevented whole cell nucleic acid syntheses in HL60 cells.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.408-415
• /
• 2009

Iron-loaded activated carbon fibers (Fe-ACF) supported titanium dioxide ($TiO_2$) photocatalyst (Fe-ACF/$TiO_2$) was synthesized using a sol-gel method. Three different types of Fe-ACF/$TiO_2$ were obtained by treatment with different precursor of Fe, and characterized using BET, SEM, XRD and EDX analysis. The photocatalytic activity of Fe-ACF/$TiO_2$ was investigated by the degradation of Rhodamine B (Rh.B) solution under UV irradiation. From the experimental results, it was revealed that Fe-ACF/$TiO_2$ composites show considerable photocatalytic ability for the removal of Rh.B by comparing non-treated ACF/$TiO_2$ composites. And photo-Fenton reaction with Fe element was incoordinately influenced due to different precursor of Fe. It clearly indicates that Fe-ACF/$TiO_2$ composites prepared using $FeCl_3$ provided the highest photo-Fenton activity, then, which was affected by pH changes on the degradation of Rh.B.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.246-250
• /
• 2004

We have investigated the effects of boron added to Cu film on the Cu-Ti reaction and microstructural evolution of Cu(B) alloy film during annealing of Cu(B)/Ti/$SiO_2$/Si structure. The result were compared with those of Cu(B)/$SiO_2$ structure to identify the effects of Ti glue layers on the Boron behavior and the result grain growth of Cu(B) alloy. The vacuum annealing of Cu(B)/Ti/$SiO_2$ multilayer structure allowed the diffusion of B to the Ti surface and forming $TiB_2$ compounds at the interface. The formed $TiB_2$ can act as a excellent diffusion barrier against Cu-Ti interdiffusion up to $800^{\circ}C$. Also, the resistivity was decreased to $2.3\mu$$\Omega$-cm after annealing at $800^{\circ}C$. In addition, the presence of Ti underlayer promoted the growth Cu(l11)-oriented grains and allowed for normal growth of Cu(B) film. This is in contrast with abnormal growth of randomly oriented Cu grains occurring in Cu(B)/$SiO_2$ upon annealing. The Cu(B)/Ti/$SiO_2$ structure can be implemented as an advanced metallization because it exhibits the low resistivity, high thermal stability and excellent diffusion barrier property.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.2
• /
• pp.81-90
• /
• 2003

This pot experiment was conducted to find out the effects of boron application(B$_{0}$; 0.0, B$_1$; 0.2, $B_2$;2.0, $B_3$;6.0, $B_3$;6.0, $B_4$;15.0me B/pot) on the forage performance in the pure and mixed swards of orchardgrass and white clover. This 1st part was concerned with the changes in the growth, flowers and flower buds, and roots/nodules of forages. The results obtained are summarized as follows: 1. At the $B_3$ and $B_4$ treatments, the B toxicity was more seriously in white clover than in orchardgrass in the first half of cutting orders, and reduced in the latter half. In white clover, it was more worsened in a mixture than in a pure culture. It was somewhat reduced at the best growth stage of each forage. 2. In orchardgrass, the B toxicity($B_3$,$ B_4$) showed the chlorosis on leaf tips, shallow leaf, little tillers, and weak stems. Whereas it showed the chlorosis/necrosis on old leaf edge, little and weak stolons in white clover. 3. Comparing with the B deficiency($B_{0}$ , $B_1$) and toxicity($B_3$, $B_4$), the optimum B application($B_2$) influenced markedly good growth of shoot, root, nodule, and flower (flower number, blooming period, early full flower) in white clover. 4. Comparing with orchardgrass, white clover was greatly influenced by the boron application. However, this responses of white clover to boron were reduced in a grass-clover mixture with additional fertilization. It was recognized that the good forage performance in a grass-clover mixture could be regulated by the adequate applications of boron and additional fertilizers.s.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.80-84
• /
• 2007

Charcoal was used as a carbon source for improving the critical current density of $MgB_2$ and the effect of annealing temperature on the $J_c$ of $MgB_2$ was investigated. The charcoal powder used in this study was $1{\sim}2$ microns in size and was prepared by wet attrition milling. $MgB_2$ bulk samples with a nominal composition of $Mg(B_{0.95}C_{0.05})_2$ were prepared by in situ process of Mg and B powders. The powder mixture was uniaxially compacted into pellets and heat treated at temperatures of $650^{\circ}C\;-\;1000^{\circ}C$ for 30 minutes in flowing Ar gas. It was found that superconducting transition temperature of $Mg(B_{0.95}C_{0.05})_2$ decreased by charcoal additions which indicates the carbon substitution for boron site. $J_c$ of $Mg(B_{0.95}C_{0.05})_2$ was lower than that of the undoped $MgB_2$ at the magnetic fields smaller than 4 Tesla, while it was higher than that of the undoped sample especially at the magnetic field higher than 4 T. High temperature annealing seems to be effective in increasing $J_c$ due to the enhanced carbon diffusion into boron sites.

• Journal of Periodontal and Implant Science
• /
• v.38 no.sup2
• /
• pp.343-354
• /
• 2008

Purpose: Aggregatibacter actinomycetemcomitans is associated with localized aggressive periodontitis. It produces cytolethal distending toxin (CDT), which induces cell cycle arrest in the G2/M phase. The CDT holotoxin is composed of CdtA, CdtB, and CdtC. CdtB has structural homology to human DNase I and is an active component of the CDT complex acting as a DNase. In particular, the pattern homology seen in the CdtB subunit has been associated with specific DNase I residues involved in enzyme catalysis, DNA binding, and metal ion binding. So, to study the functions and regulation of recombinant CdtB, we made up a quantity of functional recombinant CdtB and tested it in relation to the metal ion effect. Materials and Methods: We constructed the pET28a-cdtB plasmid from A. actinomycetemcomitans Y4 by genomic DNA PCR and expressed it in the BL21 (DE3) Escherichia coli system. We obtained the functional recombinant CdtB by the refolding system using the dialysis method and then analyzed the DNase activity and investigated the metal ion effect from plasmid digestion. Results: The recombinant CdtB subunit was expressed as the inclusion bodies. We were able to obtain functional recombinant CdtB subunit using refolding system. We confirmed that our refolded recombinant CdtB had DNase activity and was influenced by the metal ions $Mg^{2+}$ and $Ca^{2+}$. Conclusion: We suggest that the factors influencing recombinant CdtB may contribute to CDT associated diseases, such as periodontitis, endocarditic, meningitis, and osteomyelitis.

• Progress in Superconductivity
• /
• v.10 no.1
• /
• pp.40-44
• /
• 2008

A combined process of a mechanical ball milling and liquid glycerin ($C_{3}H_{8}O_3$) treatment of boron (B) powder has been conducted to enhance the superconducting properties of $MgB_2$. The individual aims of the mechanical milling and the glycerin treatment were to reduce the grain size of the $MgB_2$ and to achieve homogeneous carbon (C) incorporation into the $MgB_2$, respectively. Four kinds of B powders of as-received, glycerin treated, 2 h milled, and 2 h milled + glycerin treated were prepared. $MgB_2$ bulks were fabricated by in situ process using the prepared B powders. The mechanical ball milling was effective for a grain refinement, and a lattice disorder was easily achieved by glycerin addition. It was found that the critical current density ($J_c$) values were enhanced in the samples with milled B or glycerin treated B only. In the $MgB_2$ bulk prepared with both milled and glycerin treated B, the $J_c$ was further increased due to a higher grain boundary density and a greater C substitution.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.106-111
• /
• 2008

At the ubiquitous computing, Mobile RFID, which the convergence RFID and mobile device, researches are core method and infra to service B2B, B2C, and B2B2C service domain. We propose the functions of middleware to develop the mobile RFID device. It consists of multi-code integrated recognition module, the reader control module, the module code interpretation, and Dispatcher module. These functions can recognize the tag of EPC/ISO and mCode type. We describe the zone file of local ODS and the implemented module to read the 13.56MHz tag.