• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.120-120
• /
• 2003

MOCVD법으로 TiN 표면에 Ru을 증착함에 있어서 Ru의 핵생성을 고양시키기 위한 ECR plasma 전처리 세정이 필요하다. 본 연구에서는 Ru 증착시 ECR $H_2O$$_2$, AE Plasma 전처리 세정 효과를 SEM, AES, XRD로 분석하였다. Ru의 핵생성은 ECR H$_2$, Ar Plasma의 노출시간이 증가할수록 향상된 반면, ECR $O_2$ plasma의 경우 노출시간이 증가할수록 핵생성 효과는 감소하였다. H$_2$ plasma 내의 H$_2$ion은 Ti와 NH$_3$를 형성하기 위해서 TiN과 반응하여 TiN을 Ti로 개질 시켰으며, Ar plasma 전처리 세정하는 동안 Ar plasma 내의 Ar ion은 TiN 또는 TiON 표면의 질소와 산소원자를 제거하는 효과를 나타내었다. 그 결과 TiN 표면상에서도 Ru의 핵생성이 쉽게 이루어졌으며 H$_2$, Ar ECR Plasma 전처리 세정에서 RU 핵생성이 향상되는 결과를 얻었다. 세 종류의 plasma중에서 Ar ECR plasma로 전처리 세정한 경우에 가장 높은 Ru 핵생성 밀도를 얻을 수 있었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.75-81
• /
• 2018

The effect of $Ar-N_2$ plasma treatment on Cu surface as one of solutions to realize reliable Cu-Cu wafer bonding was investigated. Structural characteristic of $Ar-N_2$ plasma treated Cu surface were analyzed using X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscope. Ar gas was used for a plasma ignition and to activate Cu surface by ion bombardment, and $N_2$ gas was used to protect the Cu surface from contamination such as -O or -OH by forming a passivation layer. The Cu specimen under high Ar partial pressure plasma treatment showed more copper oxide due to the activation on Cu surface, while Cu surface after high $N_2$ gas partial pressure plasma treatment showed less copper oxide due to the formation of Cu-N or Cu-O-N passivation layer. It was confirmed that nitrogen plasma can prohibit Cu-O formation on Cu surface, but nitrogen partial pressure in the $Ar-N_2$ plasma should be optimized for the formation of nitrogen passivation layer on the entire surface of Cu wafer.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.51-57
• /
• 2019

To protect the Cu surface from oxidation in air, a two-step plasma process using Ar and $N_2$ gases was studied to form a copper nitride passivation as an anti-oxidant layer. The Ar plasma removes contaminants on the Cu surface and it activates the surface to facilitate the reaction of copper and nitrogen atoms in the next $N_2$ plasma process. This study investigated the effect of Ar plasma on the formation of copper nitride passivation on Cu surface during the two-step plasma process through the full factorial design of experiment (DOE) method. According to XPS analysis, when using low RF power and pressure in the Ar plasma process, the peak area of copper oxides decreased while the peak area of copper nitrides increased. The main effect of copper nitride formation in Ar plasma process was RF power, and there was little interaction between plasma process parameters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.127-128
• /
• 2009

CCP방식의 식각에 있어서 CF4/O2 Plasma Etch에 Ar을 첨가함으로써 Etch특성이 어떻게 변화하는지를 조사하였다. FE-SEM를 이용하여 Etch Profile를 측정하였다. 또한 Elipsometer와 Nanospec을 이용하여 Etch rate를 측정하였다. Ar의 비율이 전체의 47%정도를 차지하였을 때까지 Etch Profile이 향상되었다가 그이후로는 다시 감소하는 것을 볼 수 있었다. Ar을 첨가할수록 etch rate은 계속 향상되었다. Ar을 첨가하는 것은 물리적인 식각으로 반응하여 Etch rate의 향상과 적정량의 Ar을 첨가했을 때 Etch profile이 향상되는 결과를 얻었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.145-149
• /
• 2016

The effect of process parameters such as plasma composition, ICP (Inductively Coupled Plasma) source power and rf chuck power on the etch characteristics of GaN epitaxy layer was studied. $Cl_2/Ar$ ICP discharges showed higher etch rates than $SF_6/Ar$ discharges because of the higher volatility of $GaCl_x$ etch products than $GaF_x$ compounds. As the Ar ratio increases in the $Cl_2/Ar$ ICP discharges, the etch anisotropy was enhanced due to the improved physical component of the etching. For both plasma chemistries, the GaN etch rate increased continuously as both the ICP source power and rf chuck power increased, and a maximum etch rate of 251.9 nm/min was obtained at $13Cl_2/2Ar$, 750W ICP power, 400W rf chuck power and 10 mTorr condition.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.3
• /
• pp.137-141
• /
• 2006

Process window for infinite etch selectivity of silicon nitride $(Si_3N_4)$ layers to ArF photoresist (PR) was investigated in dual frequency superimposed capacitive coupled plasma (DFS-CCP) by varying the process parameters such as low frequency power $(P_{LF})$, $CH_2F_2$ and $H_2$ flow rate in $CH_2F_2/H_2/Ar$ plasma. It was found that infinite etch selectivities of $Si_3N_4$ layers to the ArF PR on both blanket and patterned wafers can be obtained for certain gas flow conditions. The etch selectivity was increased to the infinite values as the $CH_2F_2$ flow rate increases, while it was decreased from the infinite etch selectivity as the $H_2$ flow rate increased. The preferential chemical reaction of the hydrogen with the carbon in the polymer film and the nitrogen on the $Si_3N_4$ surface leading to the formation of HCN etch by-products results in a thinner steady-state polymer and, in turn, to continuous $Si_3N_4$ etching, due to enhanced $SiF_4$ formation, while the polymer was deposited on the ArF photoresist surface.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.9
• /
• pp.616-621
• /
• 1999

A planar inductively coupled $CH_4/H_2/Ar$plasma was used to investigate dry etch characteristics of GaN as a function of input power, RF bias power, and etch gas composition. Etch rate of GaN increased with input power up to 600 W and was saturated at the higher power. Also, the etch rates increased with increasing RF bias power, composition of $CH_4$ and Ar gas. We achieved the maximum etch rate of $930{\AA}$/min at the input power 400 W, RF bias power 250 W, and operational pressure 10 mTorr. This paper shows that smooth etched surface having roughness less than 1 nm in rms can be obtained by using planar inductively coupled plasma with $CH_4/H_2/Ar$ gas chemistry.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.72-74
• /
• 2004

In this study, we used a inductively coupled plasma (ICP) source for etching $Al_2O_3$ thin films because of its high plasma density, low process pressure and easy control bias power. $Al_2O_3$ thin films were etched using $Cl_2/BCl_3$, $N_2/Cl_2/BCl_3$, and Ar/$Cl_2/BCl_3$ plasma. The experiments were carried out measuring the etch rates and the selectivities of $Al_2O_3$ to $SiO_2$ as a function of gas mixing ratio, rf power, and chamber pressure. When $Cl_2$ 50% was added to $Cl_2/BCl_3$ plasma, the etch rate of the $Al_2O_3$ films was 118 nm/min. We also investigated the effect of gas addition. In case of $N_2$ addition, the etch rate of the $Al_2O_3$ films decreased while $N_2$ was added into $Cl_2/BCl_3$ plasma. However, the etch rate increased slightly as Ar added into $Cl_2/BCl_3$ plasma, and then further increase of Ar decreased the etch rate. The maximum etch rate was 130 nm/min at Ar 20% in $Cl_2/BCl_3$ plasma, and the highest etch selectivity was 0.81 in $N_2$ 20% in $Cl_2/BCl_3$ plasma. And, we obtained the results that the etch rate increases as rf power increases and chamber pressure decreases. The characteristics of the plasmas were estimated using optical emission spectroscopy (OES).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.54-54
• /
• 2003

MgO layer는 POP 패빌 내 유전증을 이온의 스퍼터링으로부터 보호하여 주며, 또한 높은 이차 전자 밤출 계수의 특성을 가지고 있어 구동 및 유지 전압을 낮춰 주는 역할을 한다. 그러나. MgO layer는 $H_20,{\;}CO_2,{\;}N_2,{\;}0_2$ 그리고 $H_2$와 같은 불순물 들을 쉽게 를착하는 단점이 있어, PDP의 특성 및 수명 단축에 영향을 줄 수 있다. 따라서, 본 연구에서는 atmospheric pressure plasma cleaning 과 low pressure i inductively coupled plasma (ICP) cleaning 처리에 의하여, 보호층으로 사용이 되는 MgO layer의 outgassing 특성을 조사하고자 한다. plasma cleaning에 의한 MgO layer 표면의 roughness와 불순물의 변화를 알아보기 위 하여 atomic force microscopy(AFM)과 x-ray p photoelectron spectroscopy(XPS)를 이용하여 측정 하였다. 또한, outgassing의 특성을 분석하기 위하여 MgO layer를 $400^{\circ}C$ 까지 온도를 가하여 온도에 따른 outgassing의 특성을 quadrupole mass spectrometer(QMS)를 이용하여 알아보았다. atmospheric pressure plasma cleaning 에서는 $He/O_2/Ar/N_2$의 gas를 사용하였으며, low pressure ICP cleaning 에 서는 Ar의 gas를 사용하였다. atmospheric pressure plasma cleaning는 low pressure ICP C cleaning과 비교해 더 낮은 outgassing을 관잘 할 수 있었으나. MgO 표면의 roughness는 low pressure ICP cleaning 후 더 낮은 것을 알 수 있었다. 또한 $He/O_2/Ar/N_2$의 gas를 사용 한 atmospheric pressure plasma cleaning 과 $Ar/O_2$의 gas를 사용한 ICP cleaning에서 이 차전자방출계수(SEEC)가 약 1.5~2.5배 증가된 것을 알 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.121-121
• /
• 2011

Graphene formed by chemical vapor deposition was exposed to the various plasmas of Ar, O2, N2, and H2 to examine its effects on the bonding properties of graphene to metal. Upon the Ar plasma exposure of patterned graphene, the subsequently deposited metal electrodes remained intact, enabling successful fabrication of field effect transistor (FET) arrays. The effects of enhancing adhesion between graphene and metals were more evident from O2 plasmas than Ar, N2, and H2 plasmas, suggesting that chemical reaction of O radicals induces hydrophilic property of graphene more effectively than chemical reaction of H and N radicals and physical bombardment of Ar ions. From the electrical measurements (drain current vs. gate voltage) of field effect transistors before and after Ar plasma exposure, it was confirmed that the plasma treatment is very effective in controlling bonding properties of graphene to metals accurately without requiring buffer layers.