• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.179-198
• /
• 2004

Organic electroluminescent devices are light-emitting diodes in which the active materials consist entirely of organic materials. Recently, many fluorescent organic materials have been reported and the study on synthesis and application of new organic light-emitting materials has been demanded. This paper reports the optical and electrical characteristics of OLEDs using novel polymers containing biphenyl structure. First, Optical properties of novel light-emitting biphenyl derivatives doped with poly(9-vinyl carbazole)(PVK) and emitted blue, bluish green color, which is attributed to the overlap area between PL spectrum of host(PVK) and absorption spectra of guests(polymer). This is correspondent with F$\"{o}$rster energy transfer process in the blends. And, OLED devices were fabricated using poly (3,4-ethylenedioxy thiophene) (PEDOT) as a hole injection material and tris-(8-hydroxyquinoline) aluminum ($Alq_3$) as an electron transporting material. EL devices fabricated as ITO/PEDOT/PVK doped with biphenyl derivatives/$Alq_3$/Li:Al and I-V-L chatacteristics and emitting efficiency of EL devices were examined. Finally, the drift mobility of PVK doped with biphenyl derivatives and $Alq_3$ were measured by TOF technique varying applied electric field. EL efficiency was increased as the ratio of hole mobility of PVK doped with biphenyl derivatives and electron mobility of $Alq_3$ was close to one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.447-450
• /
• 2003

In this paper, new luminescent material, 6,11-dihydoxy-5,12-naphtacene-dione Alq3 complex (Alq2-Ncd), 1,4-dihydoxy-5,8-naphtaquinone Alq3 complex(Alq2-Nq) was synthesized. And extended efforts had been made to obtain high-performance electroluminescent(EL) devices, since the first report of organic light-emitting diodes(OLEDS) based on tris-(8-hydroxyquinoline) aluminum(Alq3). We have performed investigate characterization of the materials. Current-voltage characteristics, luminance-voltage characteristics and luminous efficiency were measured by Flat Panel Display Analysis System(Model 200-AT) at room temperature. An intensive research is going on to improve the device efficiency using the hole injection layer, different electrodes, and etc. By using the hole injection layer, the charge-injection can be controlled and the stability could be improved. This study indicates not only the sterical effect but also some other effects would be responsible for the change of the emission wavelength.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2884-2888
• /
• 2010

Two red fluorescent DCJTB derivatives (Red 1 and 2) based on modified pyrans were synthesized and their electroluminescent properties were investigated. Multilayered OLEDs were fabricated with the device structure of ITO/NPB (40 nm)/Red 1, 2 or DCJTB (0.5 or 1%): $Alq_3$ (20 nm)/$Alq_3$ (40 nm)/Liq (2 nm)/Al. All devices exhibited efficient red emissions. In particular, a device containing emitter Red 2 as a dopant in the emitting layer, the maximum luminance was $8737\;cd/m^2$ at 12.0 V, the luminous and power efficiencies were 2.31 cd/A and 1.25 lm/W at $20\;mA/cm^2$, respectively. The peak wavelength of the electroluminescence was 638 nm with the CIE (x,y) coordinates of (0.63, 0.36) at 7.0 V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1121-1124
• /
• 2003

We report the photo (PL) and electro luminescence (EL) properties of new conjugated compounds based on imidazole moiety, 4,4' -di(4,5 diphenyl-N-imidazolyl)stilbene(DDPIS) and 4,4'-di(2,4,5-triphenyl-N-imidazolyl)stilbene(DTPIS), as emitting materials. ITO/m-MTDATA/NPB/DDPIS/Alq3/LiF/AI device shows blue EL spectrum at 456 ㎚ and 0.3 cd/ A and turn on voltage at 7 ∼ 8 V. DTPIS shows blue EL spectrum at around λmax=453㎚ and 0.5 cd/A efficiency in ITO/m-MTDATA/NPB/DTPIS/Alq3/LiF/Al device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.168-168
• /
• 2010

DCM derivatives were newly synthesized. The OLEDs with a DCM-A as an emitting layer was fabricated and analyzed their opto-electrical properties. The structures of OLEDs were I) ITO/DCM-A/Al, II) ITO/-NPD/DCM-A/LiF/Al, and III) ITO/-NPD/DCM-A/Alq3/LiF/Al. The EL peak of the DCM-A shows the red emission in the range of 700 nm. The structure I) shows that 1050 nW/cm2 at 510 mA/cm2. The structure II) shows that takes the most excellent luminance about 39,000 nW/cm2 at 290 mA/cm2. The EL structure ill shows luminance about 13,000 nW/cm2 at 6 mA/cm2.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.518-521
• /
• 2002

New luminescent material, 6,11-Dihydroxy-5,12-naphthacenedione$(Alq_2-Ncd)$ was synthesized. And extended efforts have been made to obtain high-performance electro-luminescent(EL) devices, since the first report of organic light-emitting diodes(OLEDs) based on tris-(8-hydroxy-quinoline)aluminum$(Alq_3)$ Current-voltage characteristics, brightness-voltage characteristics, luminous efficiency and quantum efficiency were measured at room temperature. The maximum wavelength of the EL is at around 504nm and the brightness is up to $2702[cd/m^2]$ with the maximum efficiency up to 3.91 [1m/W]. This study indicates not only the sterical effect but also some other effect would be responsible for the change of the emission wavelength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.952-954
• /
• 2003

We report the photo-(PL) and electroluminescence (EL) properties of new conjugated compounds based on carbazolyl vinylene moiety, 3,3'-(1,4-phenylene di-2,1-ethenediyl) bis[9-ethyl-(E,E)-9H-carbazole](PEEC) and 3,3'-([1,1'-biphenyl]-4,4'-diyldi-2,1-ethenediyl)bis[9-ethyl-9H-carbazole](BPEEC), as emitting materials. The ITO/m-MTDATA/NPB/BPEEC/Alq3/LiF/Al device shows bluish-green EL spectrum at 490nm and turn-on voltage at 8V. PEEC shows bluish-green EL around ${\lambda}$ max=496nm and turn-on voltage at 6V and 2.4 Cd/A efficiency in ITO/m-MTDATA/NPB/PEEC/Alq3/LiF/Al device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.265-268
• /
• 1997

Electroluminescent(EL) devices are constructed using multilayer organic thin film. A cell structure of glass substrate/Indium-Tinoxide/TPD as a hole transporting layer/Alq3+Rhodamine 101 perchrolate(Red3) as an emitting layer/Alq3 as an electrron transporting layer/Al as an electrode was employed. Optimal thickness of emitting layer in EL cell was performed from the viewpoint of the electronics properties of emitting layers. The general vapor-deposition method was used to control the thickness of omitting layer in EL devices and electro-optical characteristics were measured. It is clarified that controlling thickness of emitting layer in vapor-deposition film had an effect on the change of carrier injection and EL spectrum. The intensity of red omission with luminance of 81cd/$m^2$ was achived at 11V driving voltage. The surface morphology of emitting layer in EL devices was investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.955-958
• /
• 2003

We report the photo-(PL) and electroluminescence (EL) properties of new conjugated compounds based on diphenyl benzeneamine moiety, 4,4'-(1,4-phenylenedi-(1E)-2,1-ethenediyl]bis(N,N-diphenyl-benzenamine](PEDB) and 4,4'-([1,1 -biphenyl]-4,4'-diyldi-2,1-ethenediyl)bis[N,N-diphenyl-benzenamine)(BPEDB), as emitting materials and dopant materials. The ITO/m-MTDATA/NPB/DPVBi + BPEDB(1%) /Alq3/LiF/Al device shows blue EL spectrum at 458nm and high efficiency(5.3 cd/A). PEDB as dopant shows also blue EL spectrum around ${\lambda}$ max=463nm and 4.1 cd/A high efficiency in ITO/m-MTDATA/NPB/DPVBi + PEDB(1%)/Alq3/LiF/Al device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.178-180
• /
• 2003

We performed semiempirical (AMl and ZINDO) and ab initio (HF and DFT) calculations, to investigate molecular structures and optical properties of DCM and its derivatives. DCM and its derivatives are used as a red fluorescent dopant of the organic electroluminescent host materials, $Alq_3$. We have studied the relationship between the molecular structure and the optical properties of these molecules for the improvement of EL efficiencies. Wavelength at the absorption maximum was found to be red-shifted when the molecule is substituted with both strong electron donating and withdrawing functional groups. A new red fluorescent dye was predicted by QSPR study based on calculations and experimental data.