• 제목/요약/키워드: $Al_2O_3/Ag/Al_2O_3$

검색결과 144건 처리시간 0.029초

Passivation of organic light emitting diodes with $Al_2O_3/Ag/Al_2O_3$ multilayer thin films grown by twin target sputtering system

  • Jeong, Jin-A;Kim, Han-Ki
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.420-423
    • /
    • 2008
  • The characteristics of $Al_2O_3/Ag/Al_2O_3$ multilayer passivaton prepared by twin target sputtering (TTS) system for organic light emitting diodes. The $Al_2O_3/Ag/Al_2O_3$ multilayer thin film passivation on a PET substrate had a high transmittance of 86.44 % and low water vapor transmission rate (WVTR) of $0.011\;g/m^2$-day due to the surface plasmon resonance (SPR) effect of Ag interlayer and effective multilayer structure for preventing the intrusion of water vapor. Using synchrotron x-ray scattering and field emission scanning electron microscope (FESEM) examinations, we investigated the growth behavior of Ag layer on the $Al_2O_3$ layer to explain the SPR effect of the Ag layer. This indicates that an $Al_2O_3/Ag/Al_2O_3$ multilayer passivation is a promising thin film passivation scheme for organic based flexible optoelectronics.

  • PDF

올레핀/파라핀 분리를 위한 poly(ethylene oxide)/AgBF4/Al(NO3)3/Ag2O 복합체 분리막 (Poly(ethylene oxide)/AgBF4/Al(NO3)3/Ag2O Composite Membrane for Olefin/Paraffin Separation)

  • 정수영;강상욱
    • 멤브레인
    • /
    • 제27권4호
    • /
    • pp.313-318
    • /
    • 2017
  • 올레핀/파라핀 분리를 위해 $Poly(ethylene oxide)(PEO)/AgBF_4/Al(NO_3)_3/Ag_2O$ 복합막이 제조되었으며, $Ag_2O$가 도입되었을 때, 복합체 분리막의 초기성능은 선택도 13.7과 투과도 21.7 GPU로 관찰되었다. $PEO/AgBF_4/Al(NO_3)_3$ 분리막의 성능(선택도 13와 투과도 7.5 GPU)에 비해서 초기성능이 증가한 이유는 $Ag_2O$의 첨가로 인한 Ag ion의 활성도 증가로 생각되었다. 하지만 시간에 따른 성능저하 현상이 관찰되었는데 이는 고분자 matrix인 PEO 때문인 것으로 생각되었다. PEO 고분자는 $Ag_2O$ 입자를 안정화 시킬 수 없기 때문에 용매가 증발하면서 $Ag_2O$ 입자끼리 뭉치게 되고, $Ag_2O$가 barrier 역할을 하게 돼서 시간이 지나면 투과도가 감소하는 것으로 분석되었다.

Ag-V/γ-Al2O3 촉매상에서 탄화수소-Selective Catalytic Reduction에 의한 질소산화물 저감 (DeNOx by Hydrocarbon-Selective Catalytic Reduction on Ag-V/γ-Al2O3 Catalyst)

  • 김문찬;이철규
    • 공업화학
    • /
    • 제16권3호
    • /
    • pp.328-336
    • /
    • 2005
  • 본 연구에서는 배출가스 중에 포함된 NO를 비선택적 촉매환원법으로 환원시켜 제거하기 위하여 Ag와 V의 함량을 여러 가지로 달리하여 ${\gamma}-Al_2O_3$에 담지한 촉매를 제조하였고, 제조한 촉매에 대하여 온도, 산소농도, 아황산가스농도의 변화에 따른 $NO_x$의 전환율에 대하여 연구하였다. 또한 제조한 촉매의 물성분석을 통하여 촉매의 상태와 $NO_x$의 전환율과의 관계를 알아보았다. $AgV/{\gamma}-Al_2O_3$ 촉매의 경우에는 고온에서는 $Ag/{\gamma}-Al_2O_3$ 촉매보다 낮은 $NO_x$ 전환율을 나타내는 반면에 저온에서는$Ag/{\gamma}-Al_2O_3$ 촉매보다 높은 $NO_x$ 전환율을 나타내었고, 반응가스 중에 $SO_2$가 함유되어 있어도 $NO_x$의 전환율이 낮아지지 않았다. 반응실험 전 후의 촉매에 대하여 X-ray Diffraction, X-ray Photo electron Spectroscopy, Temperature Programmed Reduction, Ultraviolet-Visible Diffuse Reflectance Spectroscopy 등의 분석결과와 반응실험 결과를 비교하여 볼 때 V가 포함됨으로 인하여 Ag의 산화상태가 잘 유지되지 못하여 고온에서는 $NO_x$ 전환율이 낮아지며, $300^{\circ}C$ 이하의 저온에서는 V의 촉매작용으로 인하여 $NO_x$ 전환율이 높아진 것으로 나타났다.

$Ag/{\alpha}-Al_2O_3Ag/SnO_2$ 촉매상에서의 에틸렌 산화반응 (Oxidation of Ethylene over $Ag/{\alpha}-Al_2O_3Ag/SnO_2$)

  • 전기원;한종수;전학제
    • 대한화학회지
    • /
    • 제28권2호
    • /
    • pp.109-113
    • /
    • 1984
  • 여러가지 함량으로 은을 입힌$ Ag/{\alpha}-Al_2O_3$$Ag/SnO_2$상에서의 반응실험과 촉매의 Auger spectra, $SnO_2$에 흡착된 산소의 EPR spectra를 비교하여 담체의 종류가 에틸렌 산화반응의 활성과 선택성에 미치는 영향을 조사하였다. $SnO_2$상에서는 흡착산소중 O-가 반응에 참여하여 ethylene를 완전 산화하는 방향으로 유도하므로써 ethylene oxide 생성의 선택성을 저하시키는 것 같다.

  • PDF

Ag/$Al_{2}O_{3}$ 촉매를 이용한 Bio HC - SCR 연구 (Study for Bio HC - SCR over $Ag/Al_{2}O_{3}$ catalyst)

  • 이민주;이혜민;이주헌;김진걸
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2007년도 춘계학술발표논문집
    • /
    • pp.39-41
    • /
    • 2007
  • 자동차의 연소과정 후 발생되는 NOx를 제거하기 위하여 재생유(Bia-diesel)를 환원제로 사용하였으며, $Ag/Al_{2}O_{3}$ 를 배출가스 후처리 촉매로 사용하였다. 그에 따른 물리적 특성을 조사하고 bio-diesel 환원제의 질소산화물 제거 성능 실험을 수행하였다. 그 결과 $Ag/Al_{2}O_{3}$ 촉매계에서 최적의 Ag 담지량은 2wt% 인 것으로 나타나고, 산처리된 $Ag/Al_{2}O_{3}$ 촉매가 반응 온도$300^{\circ}C$ 에서 가장 높은 NOx 제거 전화율을 나타낸다.

  • PDF

알루미나/니켈크롬강 접합체의 미세조직 및 접합강도에 미치는 Ag-Cu-Zr-X 브레이징 합금성분의 영향 (Effect of the Alloying Elements in Ag-Cu-Zr-X Brazing Alloy on the Microstructure and the Bond Strength of $Al_2O_3$/Ni-Cr Steel Brazed Joint)

  • 김종헌;유연철
    • 소성∙가공
    • /
    • 제7권5호
    • /
    • pp.465-473
    • /
    • 1998
  • The effect of alloying elements of Ag-Cu-Zr-X brazing alloy on the microstructure and the bond strength of $Al_2O_3/Ni-Cr$ brazed steel joint was investigated. The reaction layer, $ZrO_2$ (a=5.146 ${\AA}$ , b=5.213 ${\AA}$ , c=5.311 ${\AA}$ )was formed at the interface of $Al_2O_3/Ni-Cr$ steel joint by the redox reaction between alumina and Zr. The addition of An and Al to the Ag-Cu-Zr brazing alloy gave rise to changes in the thickness of the reaction product layer and the morphology of the brazement. Sn caused the segregation of Zr was decreased b Al the $ZrO_2$ layer formed at the Ag-Cu-Zr-Al alloy was thinner than that of $ZrO_2$ formed at the Ag-Cu-Zr-An alloy. The fracture shear strength was strongly dependent on the microstructure of the brazement. Brazing with Ag-Cu-Zr-Sn alloy resulted in a better bond strength than with Ag-Cu-Zr or Ag-Cu-Zr-Al alloy.

  • PDF

$Ag/Al_2O_3$ 촉매하의 HC-SCR에서 환원제로서 수소 풍부 바이오디젤의 반응 특성 연구 (Study of EfficienCY of Hydrogen Rich Biodiesel as Reductant for HC-SCR over $Al_2O_3$ Supported Ag Catalyst)

  • 김진걸;이민주;이혜민;전지용;김성수;유승준
    • 한국수소및신에너지학회논문집
    • /
    • 제20권3호
    • /
    • pp.232-237
    • /
    • 2009
  • $Ag/Al_2O_3$ 촉매하에 디젤 엔진에서 배출되는 NOx를 정화하기 위하여, 수소가 풍부한 바이오디젤을 환원제로 사용하였다. Ag 전구체 함침과정에서 촉매기공이 부분적으로 폐쇄되는 것을 BET 실험을 통하여 관찰하였다. 2% $Ag/Al_2O_3$ 촉매의 형상과 조성은 산처리 과정을 거치더라도 변화하지 않는 것을 SEM과 EDXS 분석으로부터 확인하였다. $Ag/Al_2O_3$ 촉매 표면에서 생성되는 -NCO 와 -CN을 in-Situ DRIFT 방법을 사용하여 관찰하여 HC-SCR에서의 NOx 제거 반응구조를 확인하였다.

투명 유전체 (PbO-B2O3-SiO2-Al2O3 계)와 Ag 전극과의 반응에 의한 Ag+과 Sn2+의 거동 (Behavior of Ag+ and Sn2+ After Reaction Between the Transparent Dielectric PbO-B2O3-SiO2-Al2O3 and Ag Electrodes)

  • 홍경준;박준현;허증수;김형준
    • 한국재료학회지
    • /
    • 제12권5호
    • /
    • pp.347-352
    • /
    • 2002
  • A transparent dielectric of the $PbO-B_2O_3-SiO_2-A1_2O_3$ system which was a low melting glass has been used for PDP (Plasma Display Panel), but it has a problem which is a reaction to be occurred between a transparent dielectric layer and electrodes (Ag, ITO) after firing. This research was conducted for ion migration of $Ag^+\$ and $Sn^ {2+}$ during firing three different frits of low melting glass. The result showed that yellowing phenomena occurred through a chemical reaction between $Ag^+\$and $Sn^ {2+}$ at 550~58$0^{\circ}C$ for 20~60 min. In addition, it was confirmed that the migration of $Sn^{2+}$ from ITO electrode made a strong effect on the yellowing phenomena.

고상법으로 합성한 Sr4-(x+y+z)Al14O25 : Eux, Dyy, Agz계 축광성 형광체 장잔광의 연구 (Research on Afterglow Brightness of Sr4-(x+y+z)Al14O25 : Eux, Dyy, Agz by Solid State Synthesis)

  • 김승우;김정식
    • 대한금속재료학회지
    • /
    • 제49권4호
    • /
    • pp.348-354
    • /
    • 2011
  • Long-lasting brightness $Sr_{4}Al_{14}O_{25}$ : $Eu^{2+}$, $Dy^{3+}$, $Ag^{+}$ phosphor was synthesized by modified solid state reaction and its photoluminescence was investigated. $Sr(NO_3)_{2}$ and $Al(NO_3)_3{\cdot}9H_{2}O$ as starting materials, and $B_{2}O_{3}$ as a flux were mixed with $Eu_{2}O_{3}$ as an activator, $Dy_{2}O_{3}$ as a coactivator, and $AgNO_{3}$ as a charge compensator. The crystalline of target powder showed a single-phase $Sr_{4}Al_{14}O_{25}$ by the XRD characterization and the average particle size was about 20-30 ${\mu}m$ from the FE-SEM observation. $Ag^{+}$ ion doping effects (0-0.06 mol) on $Sr_{4}Al_{14}O_{25}:Eu^{2+},\;Dy^{3+},\;Ag^{+}$ phosphor were measured by photoluminescence spectrometer and luminescence meter. The of photoluminescence intensity of the $Sr_{3.64}Al_{14}O_{25}:Eu_{0.11},\;Dy_{0.22},\;Ag_{0.03}$ phosphor was higher than other compositions and afterglow brightness was 0.186 $cd/m^{2}$.