• International Journal of Concrete Structures and Materials
• /
• 제9권2호
• /
• pp.241-254
• /
• 2015

A lot of reinforced concrete (RC) structures in Syria went out of service after a few years of construction. This was mainly due to reinforcement corrosion or chemical attack on concrete. The use of blended cements is growing rapidly in the construction industry due to economical, ecological and technical benefits. Syria is relatively rich in scoria. In the study, mortar/concrete specimens were produced with seven types of cement: one plain Portland cement (control) and six blended cements with replacement levels ranging from 10 to 35 %. Rapid chloride penetration test was carried in accordance with ASTM C 1202 after two curing times of 28 and 90 days. The effect on the resistance of concrete against damage caused by corrosion of the embedded steel has been investigated using an accelerated corrosion test by impressing a constant anodic potential. The variation of current with time and time to failure of RC specimens were determined at 28 and 90 days curing. In addition, effects of aggressive acidic environments on mortars were investigated through 100 days of exposure to 5 % $H_2SO_4$, 10 % HCl, 5 % $HNO_3$ and 10 % $CH_3COOH$ solutions. Evaluation of sulfate resistance of mortars was also performed by immersing in 5 % $Na_2SO_4$ solution for 52 weeks. Test results reveal that the resistance to chloride penetration of concrete improves substantially with the increase of replacement level, and the concretes containing scoria based-blended cements, especially CEM II/B-P, exhibited corrosion initiation periods several times longer than the control mix. Further, an increase in scoria addition improves the acid resistance of mortar, especially in the early days of exposure, whereas after a long period of continuous exposure all specimens show the same behavior against the acid attack. According to results of sulfate resistance, CEM II/B-P can be used instead of SRPC in sulfate-bearing environments.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.132-138
• /
• 1989

High purity(99.99%) spherical particles of hydrated Basic Aluminum Salts(BAS) were prepared by a homogeneous precipitation process utilizing the urea decomposition reaction and characterized by XRD, SEM, TG-DTA, IR and PSA methods. Amorphous hydrated BAS was precipitated in the range of pH 4~6. The molar ratio [Al3+]/[SO42-] for the precipitate particles was about 3.7. With increasing the concentration of aluminum sulfate the precipitation of the hydrated BAS occurred slowly and the precipitate particles with a narrow size distribution were fine(1-2${\mu}{\textrm}{m}$ in diameter). At temperatures in the range 400$^{\circ}$to 95$0^{\circ}C$, desulfurization and dehydroxylization resulted in weight loss with 22%. When the precipitate particles were thermally treated, the crystlline ${\gamma}$-Al2O3 was identifited by XRD at 50$0^{\circ}C$ and ${\gamma}$-Al2O3 particles were transformed into $\alpha$-Al2O3 at 100$0^{\circ}C$. A vermicular network was produced by calcining at 125$0^{\circ}C$ for 30min.

• 한국대기환경학회지
• /
• 제24권5호
• /
• pp.594-603
• /
• 2008

A single particle analytical technique, named low-Z particle electron probe X-ray microanalysis, was applied to characterize four samples collected at an underground shopping area connected to Dongdeamun subway station, in January and May 2006. Based on the analysis of their chemical compositions of the samples, many distinctive particle types are identified and the major chemical species are observed to be soil-derived particles, iron-containing particles. sulfates. nitrates, and carbonaceous particles. which are encountered both in coarse and fine fractions. Carbonaceous particles exist in carbon-rich and organic. Soil derived particles such as aluminosilicates, AlSi/C, $CaCO_3\;and\;SiO_2$ are more frequently encountered in spring samples than winter samples. Nitrate- and sulfate-con taming particles are more frequently encountered in winter samples, and those nitrate- and sulfate-containing particles mostly exist in the chemical forms of $Ca(CO_3,\;NO_3),\;Ca(NO_3,\;SO_4),\;(Na,\;Mg)NO_3\;and\;(Mg,\;Na)(NO_3,\;SO_4)$. Fe-containing particles which came from nearby subway platform are in the range of about 10% relative abundances for all the samples. It is observed that nitrate- and sulfate-containing particles and carbonaceous particles are much more frequently encountered in indoor aerosol samples than in outdoor aerosols, implying that $NO_x,\;SO_x$, and VOCs at the underground shopping area were more partitioned into aerosol phase.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제45차 학술발표회
• /
• pp.42-42
• /
• 2011

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordants effect of Hwangsu spring were analyzed by pH, temperature, trace elements, organic matter and color fastness. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, in Yeongcheon (Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. Hwangsu spring during storage at $25^{\circ}C$ turned brown by photochemical reaction. The Result of ICP analysis, it contained Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm) and observed character by water analysis. Dyeing and post-mordant procedure; Cotton(KS K 0905) were dyed with clove powder for 30 min at $70^{\circ}C$. Hwangsu spring, Aluminium Sulfate $14-18H_20(Al_2(SO_4)_3{\cdot}14-18H_2O)$, Iron Sulfate Heptahydrate($FeSO_4{\cdot}7H_2O$) were used by post mordant at the same ratio. The dyed fabrics were treated with 20% each mordant solution at $25^{\circ}C$ for 10min. Comparison with a reproduced chemical mordant, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

• 분석과학
• /
• 제30권4호
• /
• pp.182-193
• /
• 2017

In order to examine the variation characteristics of chemical compositions in relation to the inflow pathways of Asian dust, $PM_{10}$ and $PM_{2.5}$ aerosols were collected at Gosan site of Jeju Island during the Asian dust days between 2010 and 2015, and their chemical compositions were analyzed. The mean mass concentrations of $PM_{10}$ and $PM_{2.5}$ during Asian dust days were $130.0{\pm}90.2$ and $38.2{\pm}24.7{\mu}g/m^3$, respectively. The composition ratios of major secondary pollutants ($nss-SO_4{^{2-}}$, $NH_4{^+}$, $NO_3{^-}$) were high as 53.7 % for $PM_{10-2.5}$ and 90.6 % for $PM_{2.5}$. When the Asian dusts had been transported to the Korean Peninsula via Loess Plateau of central China, the concentrations of $nss-Ca^{2+}$, $NH_4{^+}$, $nss-SO_4{^{2-}}$, and $NO_3{^-}$ increased more noticeably. Whereas in case when the inflow pathways of Asian dust had been through the Bohai bay, the concentrations of the crustal species such as Al, Fe, and Ca were relatively high in coarse particles. The atmospheric aerosols were acidified largely by sulfuric and nitric acids. They were neutralized mainly by calcium carbonate in coarse particle mode passed through Manchuria area, but by ammonia in fine particle mode passed through Loess plateau and Bohai bay. Ammonium salts are assumed to exist as ammonium sulfate and ammonium nitrate in coarse particles, but mostly as ammonium sulfate in fine particles.

• 한국대기환경학회지
• /
• 제14권1호
• /
• pp.11-23
• /
• 1998

The purpose of this study was to survey chemical distribution of inorganic elements and ions in the submicron particles, to characterize qualitatively emitting sources by factor analysis, and finally to reveal existing patterns in terms of chemical compounds by a stepwise multiple regression analysis. Total of 141 samples were collected by a cascade impactor from 1989 to1996. Fifteen chemical species (Al, Ba, Cd, K, Pb, Cu, Fe, Ni, $Cl^-, NO_3^-, SO_4^{2-}, K^+, Mg^{2+}, Ca^{2+}, and Na^+$) were characterized by AAS and IC. The study showed that average seasonal levels of submicron particulate matters $(d_p<0.43 \mum)$ were 18.7 $\mug/m^3$ in spring, 15.5 $\mug/m^3$ in summer, 15.7 $\mug/m^3$ in fall, and 24.5 $\mug/m^3$ in winter, respectively. All of the anion concentrations in the particle were highest in the winter season. By applying a factor analysis, 5 source patterns were qualitatively obtained, such as sulfate related source, nitrate related source, oil burning source, calcium related source, and coal combustion source. Finally, when applying a stepwise multiple regression analysis, the results clearly showed that $Na^+ and Ca^{2+}, K^+ and Ca^{2+}, NO_3^-$ and relative humidity, $Cl^-$ and ambient temperature, $Ca^{2+} and Cl^-, Mg^{2+} and SO_4^{2-}, Na^+ and NO_3^-, and Ca^{2+} and NO_3^-$, respectively, are negatively contributed to each other. As a result of those statistical analysis, we could suggest that some chemical compounds in the submicron particles such as$NaNO_3, MgSO_4, Ca(NO_3)_2, and CaCl_2$ may not exist on the filter as final composing products; however, other compounds may possibly exist in the form of $Mg(NO_3)_2, CaSO_4, Na_2SO_4, K_2SO_4, MgCl_2, NaCl, and KCl$. Thus, it must be necessary to identify differences between the results of above statistical analysis and of the real world by laboratory experiments.

• 복식문화연구
• /
• 제19권1호
• /
• pp.96-103
• /
• 2011

It is well known that the Petasites japonicus has been used for a long time medicine for the treatment of allergic diseases such as lacquer poisoning. However, the exact components and dyeing properties of its effects is still not known. Therefore, the purpose of this study was to investigate the dyeing property and ultraviolet-cut ability of silk and nylon fabrics that was dyed variously with the Petasites japonicus. The Petasites japonicus extract was done by boiling with distilled water at $100^{\circ}C$ for 1 hour. As mordanting agent, we used Aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$), Copper(II) sulfate pentahydrate ($CuSO_5{\cdot}5H_2O$), Iron(II)Chloride ($FeCl_2{\cdot}4H_2O$). The best K/S value of dyeing temperature and time, all the fabrics were $100^{\circ}C$, 90min. Silk fabric was dyed yellow(0.8Y 7.6/2.2) and nylon fabric was dyed reddish yellow(10.1 YR 7.4/3.0). Silk fabric and nylon fabric was changed greenish yellow on mordanting with $CuSO_5{\cdot}5H_2O$ and $FeCl_2{\cdot}4H_2O$ respectively. And the colorfastness of washing and dry-cleaning was improved by using mordanting agent(4~5 grade). Ultraviolet-cut ability(UV-B) was showed more 90% in dyed nylon fabrics.

• 한국식품영양과학회지
• /
• 제43권8호
• /
• pp.1248-1256
• /
• 2014

자죽염(purple bamboo salt; PBS)을 제조하는 공정에 영향을 미치는 원염(갯벌천일염, MSS; 죽염, BS)의 종류, 대나무 첨가에 따른 BS의 이화학적 특성, 황 화합물, 미네랄 함량 및 환원력을 비교 분석하고, 이를 통해 PBS에 함유된 $SO_2$와 산화환원전위(ORP)의 발생 원인을 분석하였다. BS를 고온에서 용융시켜 제조한 PBS에서 630 ppm의 $SO_2$가 검출되었다. PBS의 원료 염과 RB에서는 $SO_2$가 검출되지 않았으나, 염화물, 황산염류, 탄산염류와 대나무(RB)를 함께 탄화시켜 $SO_2$ 검출 원인을 확인한 결과 황산칼륨에 의해 782 ppm이 발생하였다. BS의 $SO_2$는 BSRB1(13.88)~BSRB4(109.13 ppm)에서만 발생하였고 $SO{_3}{^{2-}}$는 MSSRB4와 BSRB2~BSRB4에서만 발생하였으며, 시간이 경과함에 따라 증가되는 경향을 나타내었다. $SO_4{^{2-}}$는 시간이 지남에 따라 감소하는 경향을 나타내었으며 $SO_2$와 $SO_3{^{2-}}$가 많을수록 낮은 함량을 나타내었다. ORP는 모두 시간이 지남에 따라 증가하는 경향을 나타내었고 BS에서 더 높은 수준을 나타내었으며, BSRB4(-211.40 mV)에서 가장 높은 환원력을 나타내었다. 일반적 특성 중 불용분은 BS에서 더 높았으며 RB가 탄화되어 남은 물질들이 영향을 미친 것으로 판단된다. Ca, K, Mg의 경우 굽는 시간 경과에 따라 MSS는 감소, BS는 증가하는 경향을 나타내었다. BSRB4의 Ca는 1.4배, Mg는 1.5배 증가하였고 K 함량은 1.8배 더 높은 것으로 나타났다. 미량 미네랄은 굽는 시간 경과에 따라 MSS에서 Li, Al, Mn, Fe, Sr이 증가되었고, BS에서 Al, Fe, Ni가 증가하였다. 음이온(Cl, $NO_3$, Br)과 중금속(Pb, Cd, Hg, As)은 각 요인에 대한 영향을 받지 않았다. 결론적으로 BS의 기능성을 나타내는 환원력은 $SO_2$ 및 $SO_3{^{2-}}$와 같은 저분자 황화합물에 의한 것이며, 이는 한 번 굽는 과정을 거친 BS를 사용하고 이에 RB를 첨가하여 고온에서 용융하는 시간이 길수록 이들 황화물질이 많아져 환원력이 증가된다는 것을 의미하는 것이다.

• 자원환경지질
• /
• 제34권4호
• /
• pp.329-343
• /
• 2001

국내에서 가장 높은 용출온도를 보이는 경남 부곡 지열수에 대하여 Yun et al.(1998)에 의하여 기존에 발표된 수리화학 및 동위원소 자료를 토대로 지열수의 심부환경과 지화학적 진화과정을 재해석하였다. 부곡 지열수는 지화학적 특성에 따라 3가지 유형으로 구분되어 진다(지열수I,II,III형). 지열수I형과II형은 높은 온도(55.2~$77.2^{\circ}C$)를 보이며, 화학적으로 Na-$SO_4$형에 속하지만, pH와 Eh가 다소 차이가 나며, $SO_4$함량이 크다는 것이 특징이다. 지열수 중심지역으로부터 외곽부에서 산출되는 지열수 III형은 29.3~$47.0^{\circ}C$의 용출온도를 보이며, Na-$HCO_3SO_4$형을 나타낸다. 지열수 I형에 대하여 다성분계 지질온도계의 적용결과는 심부저장지의 온도가 115~$130^{\circ}C$인 것으로 추정되었다. 다양한 지화학적 특성을 보여주는 부곡 지열수의 지화학적 진화과정은 다음과 같이 해석될 수 있다. 첫째, 부곡지역보다 높은 지형에서 함양된 지하수가 심부로 순환하게 되면서, 퇴적암 또는 심부의 화강암과 물-암석 반응이 진행된다. 이때 퇴적층에 함유되어 있던 황산염 광물의 용해반응으로 지하수는 다량의 $SO_4$를 함유하게 된다. 둘째, 지하수가 계속 심부로 순환하는 과정에서 환원환경에 접하게 되어 $H_2$S가 생성되고, 심부열원에 의하여 약 13$0^{\circ}C$까지 가열되어 규산 염광물과의 반응정도가 높아진다. 이 때 pH는 상승하고 SO$_4$함량은 감소하게 되며, 방해석이 침전조건에 놓이게 됨으로써, 결국 지열수는 Na-SO$_4$형을 띠게 된다. 셋째, 이렇게 형성된 지열수가 유동로를 따라 상승하는 과정에서 덜 깊게 순환하는 지하수와 혼합과정을 거치게 된다. 지열수와 혼합되는 지하수는 퇴적층내 황철석의 산화반응에 의해 다량의 SO$_4$를 함유한 것으로 사료된다. 이렇게 형성된 지열수는 계속 상승하면서 천부환경의 지하수와 혼합되어 부곡지역내 다양한 지화학 특성을 보이는 지열수를 형성하게 된다.

• 한국균학회지
• /
• 제33권2호
• /
• pp.75-80
• /
• 2005

섬유소분해능이 우수한 L. roseoalbus로부터 분리 정제한 CMCase의 활용에 대한 기초적인 자료를 제공하고자 실험하여 L. roseoalbus의 배양액으로부터 4단계를 거쳐 분자량이 28.5 kDa인 CMCase를 분리 정제하였다. 이 효소는 pH 4.0에서 최적의 활성을 보여주는 acidic CMCase로 $30^{\circ}C$에서 최대 활성을 나타냈다. EDTA에 의해 활성이 저해되는 것으로 보아 metalloenzyme으로 추정되며, PMSF에 의해 저해되는 것으로 보아 serine 잔기를 갖고 있는 효소로 판단된다. $Al_{2}(SO_{4})_{3}$와 $FeSO_{4}$에서는 효소활성이 높았으나 $CaCl_{2}$와 $Na_{2}MoO_{4}$에서는 효소 활성이 낮았다.