• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.861-869
• /
• 1997

In order to investigate the reaction in the system of anhydrite II-blast furnace slag, the paste hydration which made up with a liquid/solid ratio of 0.45 for 1, 3, 7, 14, 28days by the addition of accelerators to 10~30wt.% slag with natural gypsum calcined for 1hour at 500/$700^{\circ}C$ was studied by combined water determination, XRD, DTA, DSC and SEM. As a result of this experiment, it was found that hydration rate was faster in the system calcined at 50$0^{\circ}C$. Therefore the anhydrite was converted to calcium sulfate dihydrate in the hydration for 1day but the slag was not almost reacted. For the gypsum calcined at $700^{\circ}C$, the hydraton rate in the system of K2SO4 addition was faster than others in the earier period, but the activated effect of the system of Al2(SO4)3 addition was regarded as the highest over 3days. As the amount of slag was increased, they dydration rate was delayed and ettringite was observed in the case of K2SO4 system. However both Al2(SO4)3 and AlK(SO4)2 systems showed calcium sulfate dhydrate only as hydrated products.

• 시멘트
• /
• 통권51호
• /
• pp.20-30
• /
• 1973

1) electron-microprobe를 응용하여 $CaO-SiO_2-Al_2O_3$ 계에서 생성한 $C_2S$, $C_3S$ 에 존재하는 sulfate의 solid, solution을 정량적으로 구할 수 있었으며 이 결과로 $C_2S$ 에 $Al_2O_3$, $SO_3$ 등이 solid soln 등으로 침적되고 이들이 $C_3S$의 생성을 억제한다는 mechanism이 확인되었다. 2) phase equilibrium(상평형)에 의하면 $Na_2SO_4$, $K_2SO_4$는 mineralizer로서 작용하며 $C_3S$ 의 생성을 돕는다. 그러나 $K_2SO_4$ 와 $Al_2SO_3$ 가 결합상태로 존재할 경우는 1,400 $^{\circ}C$에서 광범위한 liquid를 생성하며 quenching하면 glass질과 $\beta-C_2S$ 만이 얻어지고 $C_3S$ 는 생성되지 않는다. 또 이를 1,250 $^{\circ}C$ 까지 서냉하면 $C_2S$ 와 Ca, K, Al, S, 등을 함유한 새로운 물질이 생성된다. 3) $CaO-SiO_2-Al_2O_3-Fe_2O_3$ 계에서 $C_3S$ 의 생성에 미치는 $Na_2SO_4$, $K_2SO_4$ 의 영향을 실험실적으로 검토한 결과 complex interaction이 확인되었으며 $Na_2SO_4$ 는 어떤 경우에는 mineralizing effect를 상실한다는 재미 있는 사실이 발견되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제14권2호
• /
• pp.29-35
• /
• 1986

This study was carried out to examine the effect of aluminium sulfate addition to the alkali-acid catalyst phenolic resin for the manufacture of the kapur (Dryobalanops spp.) plywood on the reduction of phenolic resin spreading. On the manufacture of plywood, Adhesive Contents such as 50g/$m^2$, 75g/$m^2$ and 150g/$m^2$ were treated. The spreading adhesive content of 50g/$m^2$ and 75g/$m^2$ had been controlled to about 150g/$m^2$ added with the water in order to get sufficient spreading and controlled to pH 4.5 with aluminium sulfate [$Al_2(SO_4)_3$]. The results are summarized as follows: 1. Specific gravities of air dried plywood manufactured from each adhesive ranged from 0.77 to 0.86 and their moisture contents met the KS requirements. 2. In dry and wet shear strengths, 150 $P_{Al{\cdot}Ac}$ adhesive showed the highest and 75 $P_{Al{\cdot}Ac{\cdot}Am}$ adhesive indicated higher value than 150 $P_{Al{\cdot}Ac}$ adhesive. 3. In case of glue shear strength after boiling test, 150 $P_{Al{\cdot}Ac}$ adhesive was the best and adding of aluminium sulfate was not effective on reinforcement of boiling water resistance of phenolic resin, but met KS requirements. 4. 75 $P_{Al{\cdot}Ac{\cdot}Am}$ adhesive showed the good shear strength and met KS requirements. Therefore, adding of aluminium sulfate was very efficient for economical plywood manufacture.

• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.183-189
• /
• 2022

This study seeks towards an optimal way to control sulfate ions in semiconductor wastewater effluent with potential eco-toxicity. We developed a system based on ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O). The basic idea is that the pH of the water is raised to approximately 12 with Ca(OH)₂. After, aluminium salt is added, leading to the precipitation of ettringite. Lab-scale batch and continuous experiment results with real semiconductor wastewater demonstrated that 1.5 and 1 of stoichiometric quantities for Ca²⁺ and A³⁺ with pH above 12.7 could be considered as the optimal operation condition with 15% of sludge recycle to the influent. A mixed AlCl₃ + Fe reagent was selected as the beneficial Al³⁺ source in ettringite process, which resulted in 80% of sludge volume reduction and improved sludge dewaterability. The results of continuous experiment showed that with precipitation as ettringite, sulfate concentration can be stably reduced to less than 50 mg/L in effluent from the influent 2,050 ± 175 mg/L on average (1,705 ~ 2,633 mg/L).

• 수도
• /
• 통권4호
• /
• pp.50-56
• /
• 1975

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.361-370
• /
• 1989

Mullite powders were synthesized from the common solution of aluminum sulfate and sodium silicate solutions by the emulsion-hot kerosene technique. The reaction temperature and mechanism for mullitization and the characteristics of synthesized mullite powders were investigated. The effect of Na components introduced from sodium silicate solution on the physical property and microstructure of sintered mullite was also examined. It was proved that mullites were formed at 75$0^{\circ}C$ through the reaction mechanism of Na2O.2.2SiO2＋3.3Al2(SO4)3longrightarrow1.1(3Al2O3.2SiO2)＋Na2SO4＋8.9SO3. Synthetic mullite powders consisted of the compositiion of 3Al2O3.2SiO2 and showed highly agglomeration of hollow spherical particles of 1${\mu}{\textrm}{m}$ diameter. The density and fracture toughness of sintered mullites were somewhat reduced because of the effect of a very small amount of residual Na components.

• 생명과학회지
• /
• 제10권6호
• /
• pp.591-597
• /
• 2000

An investigation was conducted to elucidate the effect of sucrose, germicides and abscisic acid (ABA) in the preservatives on postharvest quality, such as fresh weight, solution uptake, vase life, diameter and thickness of flower, and chlorolhyll of leaf in cut chrysanthemum 'Kyoungsubang`. Fresh weight of cut chrysanthemum was highest in 250mg/L aluminum sulfate [{TEX}$Al_{2}(SO_{4})_{3}${/TEX}]+3% sucrose and 250 mg/L 8-hydroxyquinoline sulfate (8-HQS)+ 3% sucrose. Addition of sucrose and germicides inhibited microorganisms growth in solution, and apparently promoted solution uptake. The increased fresh weight seems to attribute to the elevated uptake. Germicide 8-HQS was more effective than {TEX}$Al_{2}(SO_{4})_{3}${/TEX} in the aspect of solution uptake and fresh weight. Treatment of 250 mg/L 8-HQS +3% sucrose showed the longest vase life (24.67±2.52 days) and the lowest rate of leaf chlorosis (or senescence). Addition of {TEX}$Al_{2}(SO_{4})_{3}${/TEX} and sucrose accelerated leaf chlorosis and increased diameter of flower, respectively. Sucrose treatment prolonged the vase life of flowers. Except control and 250 mg/L 8-HQS, content of chlorophyll was rapidly decreased after 6 days at upper, middle and lower leaves in order.

• 자원리싸이클링
• /
• 제7권3호
• /
• pp.3-10
• /
• 1998

모의폐액으로 제조한 50ppm의 코발트이온을 Fe(III) 및 Al(III)의 응집제와 sodium lauryl sulfate의 계면활성제를 사용하여 흡착 교질 포말부선법으로 제거하였다. 용액의 pH, 계면활성제 농도, Fe(III) 및 Al(III) 농도, 공급기체의 유속 등을 변수로 하여 실험한 결과, Fe(III)를 응집제로 사용한 경우 초기 코발트이온농도 50ppm, pH 8.5, 공급기체유속 $70mell$/min, 제거시간 15분 등의 조건에서 99.8%의 제거율을 나타내었다. 코발트 이온 제거에 앞서 모의폐액에 35% $H_2O_2$를 첨가하여 폐액을 전처리하였다. 그 결과, 최적 pH 및 처리 후 잔존용액의 pH가 낮아졌고, 넓은 범위의 pH에서 높은 제거율을 나타내었다. Fe(III) 50 ppm을 사용하여 코발트이온과 공침시킨 후 20ppm의 Al(III)를 첨가한 결과, Fe(III) 또는 Al(III)를 각각 단독으로 사용하였던 경우에 비하여 제거 가능한 pH 범위가 더욱 더 확대되었다. 이 현상은 zeta potential 의 증가 및 공침효과의 상승요인으로 추측되었다. $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$를 첨가하여 외부이온의 영향을 관찰하였으며, $SO_4^{2-}$가 0.1M 함유된 코발트용액을 Fe(III) 및 Al(III)를 사용하여 처리한 결과 제거효율은 99%를 나타내었다.

• 한국광물학회:학술대회논문집
• /
• 한국광물학회.한국암석학회 2001년도 공동학술발표회 논문집
• /
• pp.38-39
• /
• 2001

The seasonal changes in pH, Fe, Al and SO$_4$$\^$2-/ contents of acid drainage released from coal mine dumps play a major role in precipitation of metal hydroxides in the Taebaek coal field area, southeastern Korea. Precipitates in the creeks underwent a cycle of the color change showing white, reddish brown and brownish yellow, which depends on geochemical factors of the creek waters. White precipitates consist of Al-sulfate (basaluminite and hydrobasaluminite) and reddish brown ones are composed of ferrihydrite and brownish yellow ones are of schwertmannite. Goethite coprecipitates with ferrihydrite and schwertmannite. Ferrihydrite formed at higher values than pH 5.3 and schwertmannite precipitated below pH 4.3, and goethite formed at the intermediate pH range between the two minerals. With the pH being increased from acid to intermediate regions, Fe is present both as schwertmannite and goethite. From the present observation, the most favorable pH that basauluminte can precipitate is in the range of pH 4.45-5.95. SEM examination of precipitates at stream bottom shows that they basically consist of agglomerates of spheroid and rod-shape bacteria. Bacteria species are remarkably different among bottom precipitates and, to a less extent, there are slightly different chemical compositions even within the same bacteria. The speciation and calculation of the mineral saturation index were made using MINTEQA2. In waters associated with yellowish brown precipitates mainly composed of schwertmannite, So$_4$ species is mostly free So$_4$$\^$2-/ ion with less AlSo$_4$$\^$+/, CaSo$\sub$(aq)/, and MgSo$\sub$4(aq)/. Ferrous iron is present mostly as free Fe$\^$2+/, and FeSo$\sub$4(aq)/ and ferric iron exists predominantly as Fe(OH)$_2$$\^$+/, with less FeSo$\sub$4(aq)/, Fe(OH)$_2$$\^$-/, FeSo$_4$$\^$-/ and Fe$\^$3+/, respectively Al exists as free Al$\^$3+/, AlOH$_2$$\^$-/, (AlSo$_4$)$\^$+/, and Al(So$_4$)$\^$2-/. Fe is generally saturated with respect to hematite, magnetite, and goethite, with nearly saturation with lepidocrocite. Aluminum and sulfate are supersaturated with respect to predominant alunite and less jubanite, and they approach a saturation state with respect to diaspore, gibbsite, boehmite and gypsum. In the case of waters associated with whitish precipitates mainly composed of basaluminite, Al is present as predominant Al$\^$3+/ and Al(SO$_4$)$\^$+/, with less Al(OH)$\^$2+/, Al(OH)$_2$$\^$+/ and Al(SO$_4$)$\^$2-/. According to calculation for the mineral saturation, aluminum and sulfate are greatly supersaturated with respect to basaluminite and alunite. Diaspore is flirty well supersaturated while jubanite, gibbsite, and boehmite are already supersaturated, and gypsum approaches its saturation state. The observation that the only mineral phase we can easily detect in the whitish precipitate is basaluminite suggests that growth rate of alunite is much slower than that of basaluminite. Neutralization of acid mine drainage due to the dilution caused by the dilution effect due to mixing of unpolluted waters prevails over the buffering effect by the dissolution of carbonate or aluminosilicates. The main factors to affect color change are variations in aqueous geochemistry, which are controlled by dilution effect due to rainfall, water mixng from adjacent creeks, and the extent to which water-rock interaction takes place with seasons. pH, Fe, Al and SO$_4$ contents of the creek water are the most important factors leading to color changes in the precipitates. A geochemical cycle showing color variations in the precipitates provides the potential control on acid mine drainage and can be applied as a reclamation tool in a temperate region with four seasons.

• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1385-1390
• /
• 2010

Repeated additions of untreated slurry to soil affected ecology and caused high levels of heavy metal in soil and ground water. The objective of this study was to evaluate heavy metal from hanwoo slurry with ferrous sulfate ($FeSO_4{\cdot}7H_2O$), aluminum sulfate [$Al_2(SO_4)_3{\cdot}14H_2O$, alum] and aluminum chloride ($AlCl_3{\cdot}6H_2O$) as a way to improve environmental management in hanwoo industry. The treatment rates, which were incorporated totally within the hanwoo slurry, were 1.0 g and 1.5 g of ferrous sulfate, alum and aluminum chloride/25 g of hanwoo slurry. The various rates of chemical additives significantly increased dry matter (9.98~13.94%) and decreased pH (3.48~6.52) compared with the controls. The use of chemical additives decreased Fe (11~29%), Al (7~12%), Zn (13~36%), and Cu (4~32%) contents, except for Fe in hanwoo slurry with ferrous sulfate and Al in hanwoo slurry with alum and aluminum chloride. In addition, the reduction in heavy metal should be associated with reduction in pH. In conclusion, the results of this study suggest that alum and aluminum chloride additives at rate of 1.5 g were cost-effective management practice that significantly reduces heavy metal from hanwoo slurry, while it may be improved environmental management.