• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.1022-1025
• /
• 2005

ZnO 나노 구조의 형성 시 기판 표면에 의한 영향을 알아보기 위하여, Si(111) 기판과 $Al_2O_3$C (0111)면, A (0112)면, R (2110)면의 기판을 사용하여 나노 구조를 형성시키고 광학적 특성의 변화를 관찰하였다. ZnO 나노 구조는 대기 중에서 수평형 성장로를 이용하였고, 무촉매법으로 Zn 소스만을 사용하여 성장시켰다. 기판의 온도는 500$^{\circ}C$ ${\sim}$ 600$^{\circ}C$로 설정하였고, 성장된 나노 구조는 He-Cd laser (325nm)를 이용하여 10 K에서 300K까지 온도를 변화시키면서 발광 특성의 변화를 분석하였다. 상온에서 측정한 Photoluminescence (PL) 결과로부터, Si과 $Al_2O_3$ 기판에서 각각 384nm, 391 nm의 UV 발광이 관찰되었다. Si 기판에서는 산소 결핍형 결함에 의한 것으로 판단되는 녹색 발광이 관찰되었지만 $Al_2O_3$ 기판에서는 녹색 발광이 관찰되지 않았다. 그리고 온도 변화에 따른 PL 측정 결과 Si과 $Al_2O_3$ 기판에서의 UV 발광 피크의 기원이 다름을 확인할 수 있었다. 이러한 발광 특성의 차이는 기판의 표면 에너지 차이가 나노 구조의 성장 매커니즘에 영향을 주어 발생한 것으로 생각된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.957-962
• /
• 2003

The preparation of $Al_2$O$_3$-SiO$_2$ thin films from less than one micron to several tens of microns in thickness had been prepared from metal alkoxide sols. Two methods, dip-withdrawal and electrophoretic deposition, were employed for thin films and sheets formation. The requirements to be satisfied by the solution for preparing uniform and strong films and by the factors affecting thickness and other properties of the films were examined. for the preparation of thin, continuous $Al_2$O$_3$-SiO$_2$ films, therefore, metal-organic-derived precursor solutions contained Si and Al in a chemically polymerized form has been developed and produced in a clear liquid state. In the process of applying to substrates, this liquid left a transparent, continuous film that could be converted to crystalline $Al_2$O$_3$-SiO$_2$ upon heating to 100$0^{\circ}C$. And, a significant change of the film density took place in the crystallization process, thus leading to the strict requirements as to the film thickness, which could survive crystallization.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.207-207
• /
• 2009

In this work, we report the physical properties of amorphous $Al_2O_3$ thin films by plasma-enhanced chemical vapour deposition (PECVD) using trimethyl-aluminium (TMA) as the Al precursor at low temperatures. The thin films were deposited on Si substrates. The composition and the bonding structure of the amorphous $Al_2O_3$ films were studied using Fourier transform infrared spectroscopy (FT-IR), Ellipsometer and UV-visible Spectrophotometer and MOCON.

• 마이크로전자및패키징학회지
• /
• 제24권4호
• /
• pp.79-84
• /
• 2017

태양전지와 같은 광전소자의 특성 및 신뢰성 유지하기 위해서는 수분과 산소 등으로 부터 소자 내부가 보호되어야 한다. 본 연구는 여러 연성(flexible) 플라스틱 기판위에 유 무기 복합 보호막을 스프레이코팅 방법으로 형성하여 공정조건(노즐 위치, 박막 두께, 기판 구성)에 따른 소자의 보호특성을 연구하였다. 사용된 복합 보호막 재료로서 PVA (polyvinyl alcohol)와 SA(sodium alginate) 혼합 유기 물질(P.S)에 $Al_2O_3$($P.S+Al_2O_3$)과 $SiO_2$($P.S+SiO_2$) 나노 분말을 혼합하여 유 무기 복합 보호막 용액을 합성하였다. 플라스틱 기판 위에 코팅한 보호막의 두께가 $5{\mu}m$에서 91%의 투과율을 나타내었으며 $78{\mu}m$에서 $178{\mu}m$로 두께가 증가할 경우 광 투과율은 81.6%에서 73.6%으로 감소하였다. 또한 합성한 $P.S+Al_2O_3$ 복합재료를 사용하여 PEN(polyethylene naphthalate), PC(polycarbonate) 단일 플라스틱 기판과 Acrylate film과 PC 이중막(Acrylate film/PC double layer) 구조와 $Al_2O_3$ 무기박막과 PEN 이중막($Al_2O_3$ film/PEN double layer) 구조의 기판 위에 $P.S+Al_2O_3$ 용액을 사용하여 수분투과도(water vapor transmission rate, WVTR)와 표면형상 등을 측정하여 최적의 보호막 구조를 확인하였다. 즉, $Al_2O_3$ film/PEN 이중막 기판위에 형성한 보호막의 수분투과 값은 $0.004gm/m^2-day$로 가장 우수한 내 투습 특성을 나타내었다.

• Journal of Magnetics
• /
• 제1권1호
• /
• pp.46-50
• /
• 1996

Highly oriented ${BaFe_{12}{O_{19}$ films were obtained by a KrF excimer laser ablation technique using (110)$(012){Al_2}{O_3}$(001)$(012){Al_2}{O_3}$ and $(012){Al_2}{O_3}$ substrates, respectively.The degree of alignment of more than 95% were achieved for (100) on (110)$(012){Al_2}{O_3}$ and (001)$(001){Al_2}{O_3}$ planes, and heteroepitaxial films of (114) on (012)$(012){Al_2}{O_3}$were possible to be grown with a lasing energy density of 6.67 J/$cm^2$ at an oxygen partial pressure ${PO_2}$ of 900 mTorr. The best magnetic properties were obtained from the as-deposited films at the substrate temperature of $700^{\circ}C$, and post annealing treatment was not needed to enhance the magnetic properties. Experimentally saturated magnetization ($4_pi M_S$) of 3600~3800 Gauss and coercivities $(H_c)$ of 3050~3080 Oe, which approach 85% of those of Ba-ferrite bulk composed of single domain particles, were obtained in this study.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.219-224
• /
• 2020

Al₂O₃ powders with particle sizes of 0.35 ㎛, 0.5 ㎛, 1.5 ㎛, and 2.5 ㎛ are deposited onto glass and Cu substrates using the aerosol deposition (AD) process. The deposition characteristics of Al₂O₃ films using those four types of Al₂O₃ powders are investigated to determine the influence of the particle size on the films. To observe detailed micro-structures of the films, the cross-section and surface morphology are observed. Then, the crystalline size and internal strain are calculated from X-ray diffraction peaks in order to confirm the hammering effect as well as the micro-strain during the AD deposition. From the above results, deposition mechanisms related to the particle size are studied. The results of this study indicate the optimal particle size and formation mechanisms for dense Al₂O₃ film with a smooth surface roughness as well as for a porous Al₂O₃ film with a rough surface roughness.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.264-267
• /
• 2015

AlCrNO cermet films were prepared on aluminum substrates using a DC-reactive magnetron sputtering method and a water-cooled Al:Cr target. The Al₂O₃/AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF)/Al/substrate of the 5 multi-layers was prepared according to the Ar and (N₂ + O₂) gas-mixture rates. The Al₂O₃ of the top layer is the anti-reflection layer of triple AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF) layers, and an Al metal forms the infrared reflection layer. In this study, the crystallinity and surface properties of the AlCrNO thin films were estimated using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), while the composition of the thin films was systematically investigated using Auger electron spectroscopy (AES). The optical properties of the wavelength spectrum were recorded using UH4150 spectrophotometry (UV-Vis-NIR) at a range of 0.3 μm to 2.5 μm.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.163-166
• /
• 2008

Multiferroic $CoCr_2O_4$ film was deposited on MgO and $MgAl_2O_4$ substrates by the rf-sputtering process. The films were prepared at an RF-magnetron sputtering power of 50 W and a pressure of 10 mtorr (20 sccm in Ar), and at substrate temperatures of $550^{\circ}C$. The crystal structure was determined to be a spinel (Fd-3m) structure by means of X-ray diffraction (XRD) with Cu $K{\yen}{\acute{a}}$ radiation. The thickness and morphology of the films were measured by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The magnetic properties were measured using a Superconducting Quantum Interference Device (SQIUD) magnetometer. While the ferrimagnetic transitions were observed at about 93 K, which was determined as the Neel temperature, the magnetic properties all show different behaviors. The differences between the magnetic properties can be explained by the stress effects between $CoCr_2O_4$ and the substrates of MgO and $MgAl_2O_4$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.66-69
• /
• 1989

After reviewing previous work done on two piezoelectric thin films(PZT, ZnO), ZnO thin piezofim of 1-3UM is fabricated by sputtering on the different substrates(i. e., P+Si/N-Si, SiO2/P+Si/ N-Si, Al/SiO2/ P+Si/ N+Si). The result shows that ZnO piezofilm on the Al has the best c-axis orientation. One of applications for the ZnO piezofilm as an microvalve to control liquid flow is introduced, and which can be controlled electrically and remotely.

• 한국결정학회지
• /
• 제5권1호
• /
• pp.24-32
• /
• 1994

(0001),(1012) 및 (1120)면 sapphire 기판위에 성장되는 (0001), (1120) 및 (1011)면 GaN epitaxy 박막을 Ga/HCI/NH3/He 계를 사용한 HVPE(halide vapor phase epitaxy)방법에 의하여 성장시키는 연구를 수행하였다. 박막의 표면조직과 결정구조는 XRD, RHEED와 SEM으로 분석하였으며, 성장된 막의 화학적 조성은 XPS로 관찰되었다. (1120) sapphire위에는 각각 (0001)과 (1120) GaN epitaxy 박막의 두가지 배향관계가 관찰되었다. (0001)면 GaN epitaxy 박막은 (0001)과 (1120)면 sapphire 기판위에서 1050℃ 의 고온으로 성장시킬 때 이차원적인 성장구조를 보여주였으며, (1120) sapphire 기판위에 성장된 (1011) GaN 박막이 주사전자현미경과 RHEED 분석결과 가장 좋은 표면조직과 결정구조를 보여주었다.