• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.231-236
• /
• 2000

The wall thickness of the Ti-6Al-4V Large-Diameter Seamless Tube, which is supposed to be a very important parameter in a system design, was measured during $360^{\circ}$ cold bending processes. The factors or processes affecting the wall thickness include 1) primary bending, 2)secondary or finishing step of the $360^{\circ}$ bending, 3)cleaning processes in CERO TRUTM(CT)process. But thinning effects of the wall thickness during the cleaning processes are negligible compared to those during the formers. The variations in the percentages of the change in wall thickness were found to be from -14% to +16%.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.109-112
• /
• 2003

The grain-boundary microcracking materials in the system $Al_2$TiO$_{5}$ -ZrTiO$_4$(ZAT) is influenced by the thermal expansion anisotropy. The range of ZAT compositions investigated had showed very low thermal expansions of 0.3~1.3$\times$10$^{-6}$ K loin compared to 8.29$\times$10$^{6}$ K of pure ZrTiO$_4$and 0.68$\times$10$^{6}$ K of polycrystalline $Al_2$TiO$_{5}$ , respectively, compared with the theoretical thermal expansion coefficient for a single crystal of $Al_2$TiO$_{5}$ , 9.70$\times$10$^{6}$ K. The low thermal expansion and microcraking temperature are apparently due to a combination of thermal contraction and expansion caused by the large thermal expansion anisotropy of the crystal a ies of the $Al_2$TiO$_{5}$ phase.

• 한국재료학회지
• /
• 제1권4호
• /
• pp.198-205
• /
• 1991

$Fe_2O_3,\;Al_2O_3,\;TiO_2$ 및 Si분말을 사용하여 고상반응법으로 써어미스터 소결체를 합성하였다. 합성된 소결체의 조식특성을 SEM으로 조사하고, 액체항온조에서 $-50~+50^{\circ}C$ 온도영역에서의 측정 결과 $\beta$상수가 972~4005K의 값을 갖는 써어미스터 소결체를 얻었다. 이 소결체는 고공기온측정을 위한 라디오존데용 온도센서로 사용될 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.171.2-171.2
• /
• 2016

The 2-dimensiona electron gas (2DEG) layers have opened tremendous interests in the heterooxide interfaces formed between two insulating materials, especially between LaAlO3 and $SrTiO_3$. The 2DEG layers exhibit extremely high mobility and carrier concentrations along with metallic transport phenomena unlike the constituent oxide materials, i.e., $LaAlO_3$ and $SrTiO_3$. The current work inserted artificially the interfacial layer, $Sr_xCa_{1-x}TiO_3$ between $LaAlO_3$ and $SrTiO_3$, with the aim to controlling the 2-dimensional transports. The insertion of the additional materials affect significantly their corresponding electrical transports. Such features have been probed using DC and AC-based characterizations. In particular, impedance spectroscopy was employed as an AC-based characterization tool. Frequency-dependent impedance spectroscopy have been widely applied to a number of electroceramic materials, such as varistors, MLCCs, solid electrolytes, etc. Impedance spectroscopy provides powerful information on the materials system: i) the simultaneous measurement of conductivity and dielectric constants, ii) systematic identification of electrical origins among bulk-, grain boundary-, and electrode-based responses, and iii) the numerical estimation on the uniformity of the electrical origins. Impedance spectroscopy was applied to the $LaAlO_3/Sr_xCa_{1-x}TiO_3/SrTiO_3$ system, in order to understand the 2-dimensional transports in terms of the interfacial design concepts. The 2-dimensional conduction behavior system is analyzed with special emphasis on the underlying mechanisms. Such approach is discussed towards rational optimization of the 2-dimensional nanoelectronic devices.

• 한국재료학회지
• /
• 제21권9호
• /
• pp.515-519
• /
• 2011

The purpose of this study was to determine the optimal firing condition and composition for $Al_2TiO_5$ crystal, which is suitable for stable coloration in glazes at high temperatures, using $Cr_2O_3$ as chromophore for the synthesis of $Al_2TiO_5$ system pigments. $Al_2TiO_5$ has a high refractive index and good solubility of chromophore in the $Al_2TiO_5$ lattice, making this structure a good candidate for the development of new ceramic pigments. Pigments were synthesized by using $Al_2O_3$ and $TiO_2$ mainly. Various amounts of $Cr_2O_3$ such as 0.01, 0.02, 0.03, 0.04 and 0.05 mole were also added. Each compound was synthesized at $1300^{\circ}C$, $1400^{\circ}C$, and $1500^{\circ}C$ for 2 hours and cooled naturally. The crystal structure, solubility limit, and color of the synthesized pigments were analyzed by XRD, SEM, Raman spectroscopy, UV and UV-vis. The changes in color as the result of applying 6 wt% of the synthesized pigments to lime barium glaze were expressed as CIE-L*a*b* values. A $Cr_2O_3$ 0.03 mole doped $Al_2TiO_5$ brown pigment was successfully synthesize at $1400^{\circ}C$, and the values of CIE-L*a*b* parameters were L* = 44.62, a* = 3.10, and b* = 17.25. In the case of the pigment synthesized at $1500^{\circ}C$, the brown color was obtained at 0.01 mole and 0.02 mole $Cr_2O_3$, and the CIE-L*a*b* values were 55.34, 1.73, 28.64, and 49.39, 0.51, 21.33, respectively. At $1500^{\circ}C$, the maximum limit of solid solution was 0.03 mole $Cr_2O_3$. The glazed sample showed green color, and the values of the CIEL* a*b* parameters were L* = 45.69, a* = -0.98, and b* = 20.38.

• 한국세라믹학회지
• /
• 제30권7호
• /
• pp.535-542
• /
• 1993

It was investigated in this study that a preparation method, activation energy, surface area, pore volume, pore size distribution and DTA analysis of the dry gel in process of producing monolithic porous gel in Li2O-Al2O3-TiO2-SiO2 system by the sol-gel technique using metal alkoxides. Activation energy for gellation according to the variation of water concentration and the kind of catalysts ranged from 10 to 20kcal/mole. Monolithic dry gels were prepared after drying at 9$0^{\circ}C$ when the amount of water for gellation was 4~8 times more than the stoichiometric amount, that was necessary for the full hydrolysis of the mixed metal alkoxide. The specific surface area, the pore volume, the average pore radius of the dried gel at 18$0^{\circ}C$ according to the various kinds of catalyst were about 348~734$m^2$/g, 0.35~0.70ml/g and 10~35$\AA$, respectively. It showed that the dry gels were porous body. As a result ofthe analysis of DTA, it was confirmed that the exothermaic peaks at 715$^{\circ}C$ and 77$0^{\circ}C$ was clue to the crystallization of dried gel.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1998년도 춘계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1998

In 1957, the first magnetic disk drive compatible with a movable head was introduced as an external file memory device for computer system. Since then, magnetic disks have been improved by increasing the recording density, which has brought about the development of a high performance thin film magnetic head. The thin film magnetic head has a magnetic circuit on a ceramic substrate using IC technology. The physical property of the substrate material is very important because it influences the tribology of head/disk interface and also manufacturing process of the head. $Al_{2}O_{3}$-TiC ceramics, so called ALTIC, is known to be one of the best substrate materials which satisfies this property requirement. Even though the head is not in direct contact with the disk, frequent instantaneous contacts are unavoidable due to its high rotating speed and the close gap between them. This may cause damage in the magnetic recording media and, thus, it is very important that the magnetic head has a good wear resistance. $Al_{2}O_{3}$-TiC ceramics has an excellent tribological property in head/disk interface. Manufacturing process of thin film head is similar to that of IC, which requires extremely smooth and flat surface of the substrate. The substrate must be readily sliced into the heads without chipping. $Al_{2}O_{3}$-TiC ceramics has excellent machineability and mechanical properties. $Al_{2}O_{3}$-TiC ceramics was first developed at Nippon Tungsten Co. as cutting tool materials in 1968, which was further developed to be used as the substrate materials for thin film head in collaboration with Sumitomo Special Metals Co., Ltd. in 1981. Today, we supply more than 60% of the substrates for thin film head market in the world. In this paper, we would like to present the sintering process of $Al_{2}O_{3}$-TiC ceramics and its property in detail.

• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.126-130
• /
• 2016

Ti-합금은 낮은 밀도, 낮은 탄성계수, 우수한 고온강도, 내산화성 및 인체적합성으로 자동차와 항공산업 및 바이오 산업에서 구조용 재료로 널리 연구되고 있다. 본 연구에서는 Ti-합금 중 대표적인 조성인 Ti-64(6 wt% Al, 4 wt% V) 합금에 대한 결정학적 특성과 미세조직에 대해서 알아보고자 하였다. XRD 분석을 통하여 Ti-64 샘플의 주요 결정상을 분석하였고, FE-SEM 및 EDX 분석을 통하여 Ti-64 합금 샘플의 미세구조를 화학조성의 차이에 의해 고찰하였다.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.438-445
• /
• 2002

본 연구에서는 $PbO-TiO_2-SiO_2-BaO-ZnO-Al_2O_3-CaO-B_2O_3-Bi_2O_3-MgO$계의 유리를 $1,400{\circ}C$에서 용융시킨 후, 급랭, 분쇄하여 glass frit을 제조하였다. Glass frit 분말을 일축가압성형한 후 $750~1,000{\circ}C$의 온도범위에서 2시간 동안 소성 및 결정화 하였다. Glass frit의 결정화는 $750{\circ}$ 전후의 온도에서 시작되었고, 저온에서의 주된 결정상은 $Al_2O_3$와 hexagonal celsian($BaAl_2Si_2O_8$)이었다. 소성온도가 높아지면서 monoclinic celsian, $ZnAl_2O_4,\;Zn_2SiO_4,\;CaTi(SiO_4)O,\;TiO_24 등이 주된 결정상으로 나타났고, 특히 celsian은 hexagonal에서 monoclinic으로 상전이가 발생하였다. 그리고 15wt%의 PbO를 첨가한 glass frit에만 $PbTiO_3-CaTiO_3$ 고용체가 나타났다. 1MHz 대역에서 유전특성을 살펴본 결과 유전상수는 11~16이었고, 유전손실은 0.020 미만이었다. 그러나 15wt%의 PbO를 첨가한 glass frit의 경우는 $PbTiO_3-CaTiO_3$ 고용체 결정상의 존재로 유전상수가 17~26으로 높았고, 유전손실은 0.010~0.015로서 다른 조성들에 비하여 우수한 특성을 나타내었다.

• 한국재료학회지
• /
• 제3권1호
• /
• pp.33-42
• /
• 1993

세라믹스를 공업분야에 응용범위를 확대하기 위한 최선의 수단으로 금속과의 복합화를 들수 있다. 금속과 복합화하는 방법중에서 세라믹스/금속접합은 부품의 제조등에 이용될 수 있는 수단으로 많은 연구가 행하여져서 이미 몇몇 부품에 대해서는 실용화가 되고 있고 현재에도 활발히 연구가 되고 있다. 따라서 본 연구에서는 여러가지 접합법중에서도 비교적 공정이 간편한 활성 브레이징법을 이용해 $Al_2$$O_3$ 와 304 스테인레스강을 접합하였으며 이때 삽입금속으로는 Cu-Ti합금을 사용하였고 접합온도 및 접합시간 범위는 각각 110$0^{\circ}C$-120$0^{\circ}C$, 0.5h-1.5h, 그리고 브레이징로 내의 분위기는 $10^{-3}$-$10^{-4}$ torr로 유지하였다. 접합후 접합부 조직에 대한 접합조건의 영향을 검토하고 반응생성물을 EDX, WDX 및 XRD을 이용해 분석하였으며 반응층형성을 위한 계면화학반응을 고찰하였다. 그 결과 알루미나와 삽입금속의 계면에서 접합을 유도하는 반응층은 T$i_2$$O_3$임을 확인할 수 있었다.