• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.707-722
• /
• 1992

본 연구에서는 공구의 큰 파손에서 부터 공구의 기하학적 형태가 크게 변하지 않는 작은 파손등 파손의 크기와 파손부위에 따른 신호의 형태를 조사하고자 한다. 그 방법으로서 가공재료로서는 SM45C강(steel)과 열처리한 SM45C강을 이용하였다. 공구파손에 따른 AE신호와 절삭력신호의 변화를 분석하기 위하여, AE신호의 경우는 RMS값을 택하고 그 진폭의 갑작스런 변화와 평균 레벨의 변화를 이용하여 파손의 순간 을 감지하였고, 절삭력의 경우에는 절삭력의 주분력, 이송분력 그리고 배분력의 변화 형태를 이용하여 공구의 이상상태를 알 수 있었으며, 이 두 신호의 변화를 동시에 관 찰함으로써 임의의 가공조건에서 공구의 파손을 감지할 수 있는 알고리즘 개발의 기준 을 마련할 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제21권5호
• /
• pp.657-673
• /
• 2019

최근 음향방출(Acoustic Emission, AE) 센서를 이용하여 지하 암반 내 구조물의 손상을 평가하는 기법이 활발하게 사용되고 있다. 암반 손상 시 발생되는 미소파괴음은 시간 및 주파수 영역에서 다양한 음향방출 특성인자로 분석된다. 암반 내 초기 균열 발생부터 최종 파괴까지의 특징을 파악하기 위해서는 외부응력 수준과 암반 강도에 따른 음향방출 특성인자 발생 양상을 이해하는 것이 중요하다. 본 연구에서는 경암과 연암 강도를 가진 화강암 시편을 이용하여 일축 압축시험을 수행하여, 암석 시편 파괴 시 발생하는 음향방출 특성인자를 분석하였다. 실험결과, 응력 비율이 증가할수록 이벤트 횟수, 실효값, 최대 진폭, 절대 에너지가 경암 시편에서 연암 시편 보다 높은 경향을 보였다. 또한, 주파수 관련 특성인자는 응력 비율 증가나 시편의 물성특성에 대해 민감도가 낮은 것으로 분석되었다. 본 연구에서 암석 시편 파괴에 따른 음향방출 특성인자 분석 결과, 실효값(RMS)이 가장 민감한 인자로 평가되었다. 본 연구의 결과는 음향방출 기반 모니터링 수행 시 암반 손상 정도 평가를 위하여 유용하게 활용될 수 있을 것으로 기대된다.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.8-16
• /
• 2003

Monitoring of the drill wear :md hole quality change is conducted during the drilling process. Cutting force measured by tool dynamometer is a evident feature estimating abnormal state of drilling. One major difficulty in using tool dynamometer is that the work-piece must be mounted on the dynamometer, and thus the machining process is disturbed and discontinuous. Acoustic transducer do not disturb the normal machining process and provide a relatively easy way to monitor a machining process for industrial application. for this advantage, AE signal is used to estimate the abnormal fate. In this study vision system is used to detect flank wear tendency and hole quality, there are many formal factors in hole quality decision circularity, cylindricity, straightness, and so of but these are difficult to measure in on-line monitoring. The movement of hole center and increasement of hole diameter is presented to determine hole quality. As the results of this experiment AE RMS signal and measurements by vision system are shorn the similar tendency as abnormal state of drilling.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1038-1042
• /
• 2002

Monitoring of the drill wear and hole quality change is conducted during the drilling process. Cutting force measured by tool dynamometer is a evident feature estimating abnormal state of drilling. One major difficulty in using tool dynamometer is that the work piece must be mounted on the dynamometer, and thus the machining process is disturbed and discontinuous. Acoustic transducer do not disturb the normal machining process, and provide a relatively easy way to monitor a machining process for industrial application. For this advantage, AE signal is used to estimate the abnormal state. In this study vision system is used to detect flank wear tendency and hole quality, there are many formal factors in hole quality decision circularity, cylindricity, straightness, and so on, but these are difficult to measure in on-line monitoring. The movement of hole center and increasement of hole diameter is presented to determine hole quality As the results of this experiment, AE RMS signal and measurements by vision system are shown the similar tendency as abnormal state of drilling. And detection of the abnormal states using BPNs was achieved 96.4% reliability.

• 한국재료학회지
• /
• 제8권10호
• /
• pp.890-897
• /
• 1998

n-InP(001)기판과 PECVD법으로 ${Si}_3N_4$(200nm)막이 성장된 InP 기판사이의 direct wafer bonding을 분석하였다. 두 기판을 접촉시켰을 때 이들 사이의 결합력에 크게 영향을 주는 표면 상태를 접촉각 측정과 AFM을 통해서 분석하였다. InP 기판은 $50{\%}$ 불산용액으로 에칭하였을 때 접촉각이 $5^{\circ}$, RMS roughness는 $1.54{\AA}$이었다. ${Si}_3N_4$는 암모니아수 용액으로 에칭하였을 때 RMS roughness가 $3.11{\AA}$이었다. Inp 기판과 ${Si}_3N_4$/InP를 각각 $50{\%}$ 불산 용액과 암모니아수 용액에 에칭한 후 접촉시켰을 때 상당한 크기의 초기 겹합력을 관찰할 수 있었다. 기계적으로 결합된 시편을 $580^{\circ}C$-$680^{\circ}C$, 1시간동안 수소 분위기와 질소분우기에서 열처리하였다. SAT(Scanning Acoustic Tomography)측정으로 두 기판 사이의 결합여부를 확인하였다. shear force로 측정한 InP 기판과 ${Si}_3N_4$/InP사이의 결합력은 ${Si}_3N_4$/InP 계면의 결합력만큼 증가되었다. TEM과 AES를 이용해서 di-rect water bonding 계면과 PECVD계면을 분석하였다.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.244-250
• /
• 2001

A rotating axis diagnostic system supported with journal bearing has been established that has been widely used in the industry. In order to measure the most sensitive signals that would be generated in the abnormal operation, sensors which measure AE(acoustic emission), gap and acceleration have been attached at the various location on the experimental apparatus. Data were obtained in the steady state operational condition of the system which was verified through the empirical measurement. Notable discrepancies were observed in RMS acceleration signal which could be utilized to predict the undesirable operational condition of the system.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2009년도 춘계학술대회
• /
• pp.249-252
• /
• 2009

본 연구는 화면전환 및 필기 등의 프레젠테이션을 편리하게 제어 할 수 있는 시스템을 구현하고자 한다. 카메라를 이용한 컴퓨터 비전 분야에서 주변의 조명 환경의 영향을 적게 받는 적외선을 이용한 연구가 활발하게 진행되고 있다. 제안하는 방법에서는 USB(Universal Serial Bus) 타입의 카메라를 적외선 환경에 맞게 개조하고, 이를 이용하여 적외선 LED(Light Emitting Diode)를 이용한 전자 분필 영상을 취득하여, 실시간으로 전자 분필의 위치를 검출한다. 검출된 영역은 사전에 사용자가 설정한 '필기 가능 영역'과 변형 함수에 기반하여, 실제 모니터 좌표로 사상되어 화면에 표시되게 된다. 제안하는 시스템은 저렴한 가격의 웹 캠과 적외선 조명 이외에는 별도의 장비가 필요하지 않으면서도, 대형 스크린을 터치 방식으로 활용할 수 있다는 장점을 가진다. 실험 결과, 계산된 모니터 좌표와 사용자가 의도한 위치간의 평균 RMS(Root Mean Square) 오차는 약 15픽셀로 나타나서, 글씨를 필기하고 화면의 특정 부분을 강조하기 위한 활용이 가능함을 확인할 수 있었다.

• 대한원격탐사학회지
• /
• 제29권6호
• /
• pp.631-644
• /
• 2013

Significant Wave Height (SWH) data measured by satellite altimeters (Topex/Poseidon, Jason-1, Envisat, and Jason-2) were validated in the seas around Korea by comparison with wave height measurements from marine meteorological buoy stations of Korea Meteorological Administration (KMA). A total of 1,070 collocation matchups between Ku-band satellite altimeter data and buoy data were obtained for the periods of the four satellites from 1992 to the present. In the case of C-band and S-band observations, 1,086 matchups were obtained and used to assess the accuracy of satellite SWH. Root-Mean-Square (RMS) errors of satellite SWH measured with Ku-band were evaluated to roughly 0.2_2.1 m. Comparisons of the RMS errors and bias errors between different frequency bands revealed that SWH observed with Ku-band was much more accurate than other frequencies, such as C-band or S-band. The differences between satellite SWH and buoy wave height, satellite minus buoy, revealed some dependence on the magnitude of the wave height. Satellite SWH tended to be overestimated at a range of low wave height of less than 1 m, and underestimated for high wave height of greater than 2 m. Such regional characteristics imply that satellite SWH should be carefully used when employed for diverse purposes such as validating wave model results or data assimilation procedures. Thus, this study confirmed that satellite SWH products should be continuously validated for regional applications.

• 대한원격탐사학회지
• /
• 제10권2호
• /
• pp.83-107
• /
• 1994

Sea surface temperatures (SSTs) estimated by using the operational SST derivation equations of NOAA/NESDIS were compared with satellite-tracked drifter temperatures. As a result of eliminating cloud-filled or contaminated pixels through several cloud tests, 69 matchup points between the drifter temperatures and the SSTs estimated with NOAA satellite 9, 10. 11 and 12 data from August, 1993 to July, 1994 were collected. Multi-channel sea surface temperature(MCSST) using a split window technique showed an approximately $1.0{\circ}C$ rms error as compared with the drifting buoy temperatures for 69 coincidences. Accuracies for satellete-derived sea surface temperatures were evaluated for only NOAA-11 AVHRR data which had relatively large matchups of 35points as compared with other satellites. For the comparison of the oberved temperatures with the calculated SSTs, linear MCSST and nonlinear cross product sea surface temperature(CPSST) algorithms by the split, the dual and the triple window technique were used respectively. As a result, the split window CPSSTs showed the smallest rms error of $0.72{\circ}C$. Defferences between the split window SSTs and the drifter temperatures appeared th have a linear tendency against the drifter temperatures and also against the differences between AVHRR channel 4 and 5 brighness temperatures. This indicates some possibilities that satelite-derived SSTs operationally calculated from the NOAA/NESDIS equation in the seas around Korea have been underestimated as compared with actural SSTs in case sea water temperature is relatively low or the atmosphere over the sea surface is very dry like in winter, while overstimated in case of high temperature or very moist atmospheric equations based on local sea measurements around Korea instead of global measurements should be derived.

• 대한원격탐사학회지
• /
• 제27권6호
• /
• pp.729-741
• /
• 2011

Wind speeds have long been estimated from C-band VV-polarized SAR data by using the CMOD algorithms such as CMOD4, CMOD5, and CMOD_IFR2. Some SAR data with HH-polarization without any observations in VV-polarization mode should be converted to VV-polarized value in order to use the previous algorithms based on VV-polarized observation. To satisfy the necessity of polarization ratio (PR) for the conversion, we retrieved the conversion parameter from full-polarized SIR-C SAR image off the east coast of Korea. The polarization ratio for SIR-C SAR data was estimated to 0.47. To assess the accuracy of the polarization ratio coefficient, pseudo VV-polarized normalized radar cross section (NRCS) values were calculated and compared with the original VV-polarized ones. As a result, the estimated psudo values showed a good agreement with the original VV-polarized data with an root mean square error by 0.99 dB. We applied the psudo NRCS to the estimation of wind speeds based on the CMOD wind models. Comparison of the retrieved wind field with the ECMWF and NCEP/NCAR reanalysis wind data showed relatively small rms errors of 1.88 and 1.91 m/s, respectively. SIR-C HH-polarized SAR wind retrievals met the requirement of the scatterometer winds in overall. However, the polarization ratio coefficient revealed dependence on NRCS value, wind speed, and incident angle.