• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.93-102
• /
• 1995

A series of test was performed by measuring the failure strength and the failure mode of fiber reinforced composite laminates joint containing two holes in Series or Parallel. $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate with W/d(Side distance ratio) 4.0 and E/d(Edge distance ratio) 3.0 has the full bearing strength and are preferable in case of the good efficiency in two series hole. Comparisons were made between testing results and predicting values of the FEM model. Good agreements were fecund between them except the case of $E/d=2{\sim}3$. In the case of $G_h{\geq}3.0d$ and $G_v{\geq}3.0d$ since the interaction coefficients between two parallel holes and between two series holes were small, holes can be treated as independent. The Acoustic Emission(AE) and SEM method were utilized to find out the initial defects, damage and the fracture mechanism.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.323-330
• /
• 2008

High cycle bending fatigue of socket welded small bore pipe was characterized, and also the fatigue crack initiation of small bore pipe was monitored in situ by the acoustic emission (AE) technique. The STS 316L stainless steel specimens were prepared by gas tungsten arc welding (GTAW) process having the artificial defect (i.e., lack of penetration) and defect free at the root. The fatigue failure was occurred at the loc for high stress and root for relatively low stress. The crack initiation cycles ($N_i$) was defined to the abrupt increase in AE counts during the fatigue test, and then the cracks were observed by the radiographic test and electron microscope before and after the fatigue crack initiation cycles. The socket welded pipe damaged by bending fatigue was studied regarding the welding defect, failure mode, and crack initiation cycles for the diagnosis and monitoring.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1026-1031
• /
• 2008

Nowdays, homes and small businesses rely more and more PON(Passive Optical Networks) for financial transactions, private communications and even telemedicine. Thus, encryption for these data transactions is very essential due to the multicast nature of the PON In this parer, we presented our implementation of a counter mode AES based on Virtex4 FPGA. Our design exploits three advanced features; 1) Composite field arithmetic SubByte, 2) efficient MixColumn transformation 3) and on-the-fly key-scheduling for fully pipelined architecture. By pipeling the composite field implementation of the S-box, the area cost is reduced to average 17 percent. By designing the on-the-fly key-scheduling, we implemented an efficient key-expander module which is specialized for a pipelined architecture.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.5
• /
• pp.807-816
• /
• 2022

See-In-The-Middle (SITM) is an analysis technique that uses Side-Channel information for differential cryptanalysis. This attack collects unmasked middle-round power traces when implementing block ciphers to select plaintext pairs that satisfy the attacker's differential pattern and utilize them for differential cryptanalysis to recover the key. Romulus, one of the final candidates for the NIST Lightweight Cryptography standardization competition, is based on Tweakable block cipher Skinny-128-384+. In this paper, the SITM attack is applied to Skinny-128-384 implemented with 14-round partial masking. This attack not only increased depth by one round, but also significantly reduced the time/data complexity to 2^14.93/2^14.93. Depth refers to the round position of the block cipher that collects the power trace, and it is possible to measure the appropriate number of masking rounds required when applying the masking technique to counter this attack. Furthermore, we extend the attack to Romulus's Nonce-based AE mode Romulus-N, and Tweakey's structural features show that it can attack with less complexity than Skinny-128-384.

• Journal of the Korean Chemical Society
• /
• v.56 no.3
• /
• pp.363-370
• /
• 2012

The purpose of the study was to classify scientific models in the seventh grade science textbooks of the 2007 revised science curriculum. The three chapters of 'three states of material', 'motion of molecule', and 'change of state and energy' were investigated. There were two types of the scientific model as 'mode of representation' and 'attribute of representation'. The mode of representation was composed of 'action model', 'analogical model', 'symbolic model', and 'theoretical model' and the attribute of representation was composed of 'static model' and 'dynamic model'. The results showed that the action model and the analogical model were used primarily in mode of representation. The dynamic model were widely used in attribute of representation. Area of matters dealt with conception of molecules and aimed for students to understand the arrangement and movement of molecule microscopically about macroscopic state in a daily life. Tis study could help to recognize the limitations of scientific models on current textbooks and offer more useful information in planning lessons and organizing textbooks for the future.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2008-2014
• /
• 2011

Serotonin or 5-hydroxytryptamine subtype 2C ($5-HT_{2C}$) receptor belongs to class A amine subfamily of G-protein-coupled receptor (GPCR) super family and its ligands has therapeutic promise as anti-depressant and -obesity agents. So far, bovine rhodopsin from class A opsin subfamily was the mostly used X-ray crystal template to model this receptor. Here, we explained homology model using beta 2 adrenergic receptor (${\beta}$2AR), the model was energetically minimized and validated by flexible ligand docking with known agonists and antagonists. In the active site Asp134, Ser138 of transmembrane 3 (TM3), Arg195 of extracellular loop 2 (ECL2) and Tyr358 of TM7 were found as important residues to interact with agonists. In addition to these, V208 of ECL2 and N351 of TM7 was found to interact with antagonists. Several conserved residues including Trp324, Phe327 and Phe328 were also found to contribute hydrophobic interaction. The predicted ligand binding mode is in good agreement with published mutagenesis and homology model data. This new template derived homology model can be useful for further virtual screening based lead identification.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1867-1869
• /
• 2003

In this paper, chamber(Circuit breaker compartment of C-GIS) made of stainless steel with 4 mm width is used. Artificial defect was made on enclosure or HV conductor of chamber and $SF_6$ gas was injected into it according to pressure. In this experiment, Acoustic emission sensors of different types was used to compare sensitivity to detect acoustic signal occurred by Partial discharge(PD) of according to types and resonance frequency in $SF_6$ gas atmosphere. Sensors used in tests was R6I, R15I and 2/4/6 Pre-Amplifier connected with R6IU without pre. amp. In case of R6IU, gain was adjusted with 40 dB like other sensors and operated by differential mode. Post amplifier(post. amp) and band pass filter(BPF) were developed Gain of post. amp. is 60 dB and BPF has band width of $50{\sim}300$ kHz. Also, envelope circuit developed reduces frequency of AE sensor. As a result, in $SF_6$ atmosphere, R6IU and R6I had resonance frequency of 60 Hz was better than R15I. Also, R6IU was better than R6I because of type property of pre.amp. had differential mode.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.9-15
• /
• 2012

In this paper, the bearing strengths and fracture behaviors of the pin-jointed carbon fiber/epoxy composites were investigated through pin loading test with acoustic emission technique. The composites were fabricated by a filament winding process, and three types of laminated patterns were considered. Type 1 was fabricated with stitch, Type 2 was fabricated without stitich and Type 3 was fabricated with prepregs. According to the results, bearing strength of Type 1 was 3.3% lower than that of Type 2 and that of Type 3 was highest. Type 1 and Type 2 revealed a net-tension failure mode, respectively, whereas Type 3 pattern exhibited a bearing failure mode. Also, acoustic emission energy of the Type 3 was higher than that of the Type 1 and Type 2. Therefore, the Type 3 was found to be structurally safer than the Type 1 and Type 2.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.5
• /
• pp.15-25
• /
• 2002

In this paper a design of high performance cryptographic processor which implements AES Rijndael algorithm is described. To eliminate performance degradation due to round-key computation delay of conventional processor, the on-the-fly precomputation of round key based on modified round structure is adopted. And on-the-fly round key generator which supports 128, 192, and 256-bit key has modular structure. The designed processor has iterative structure which uses 1 clock cycle per round and supports three operation modes, such as ECB, CBC, and CTR mode which is a candidate for new AES modes of operation. The cryptographic processor designed in Verilog-HDL and synthesized using 0.251$\mu\textrm{m}$ CMOS cell library consists of about 51,000 gates. Simulation results show that the critical path delay is about 7.5ns and it can operate up to 125Mhz clock frequency at 2.5V supply. Its peak performance is about 1.45Gbps encryption or decryption rate under 128-bit key ECB mode.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.423-428
• /
• 2000

Bacteriocins are classified as proteins which are produced by heterogeneous groups of bacteria, having and antimicrobial effect of the closely related organisms. Recently, bacteriocins derived from lactic acid bacteria and other food-related organisms have been the subject of much research on potential food biopreservatives. The goal of this study was to screen and characterize the bacteriocinogenic lactic acid bacteria from Jeot-gal(commercial fermented fish foods). All bacteriocinogenic isolates were identified as lactic acid bacteria. Isolates NK24, NK34, and SA72 were tentatively identified as Lactobacillus brevis, according to the API 50 CHL kit database. All antimicrobial substances produced from four lactic acid bacteria isolates completely lost their antibacterial activity after being treated with some proteases, indicating to their proteinaceous nature. The bacteriocin produced from isolates NK24, NK34, and SA72 showed a broad spectrum of activity when compared to those produced from isolate SA131. All bacteriocins isolated during the course of this study showed a bactericidal mode of inhibition.