• Journal of Life Science
• /
• v.18 no.2
• /
• pp.148-153
• /
• 2008

Phytochrome double mutant (PhyAB) showed the delayed root gravitropic response compared to the wild type (WT) in Arabidopsis. After 8 hr of gravistimulation, the gravitropic response of mutant showed 48% of the WT. The delayed response started at 1.5 hr after gravistimulation. And we measured the ethylene production in the root segments of WT and mutant for 12 hr. Ethylene production of mutant decreased about 40% of the WT at 12 hr. This result suggested that the phytochrome might be linked with ethylene production in some way. Generally, ethylene inhibits the growth of plant organs including roots. We measured the root growth rate in the presence of ACC (1-aminocyclopropane-1-carboxylic acid), a precursor of ethylene. And WT showed the inhibition of root growth with ACC, but mutant did not show the inhibition as WT did. To confirm the relationship between the ethylene and gravitropic response, we measured the gravitropic response with ACC. In the presence of $10^{-6}$ M ACC, WT showed the 37.4% inhibition compared to the control (no ACC), whereas mutant showed the only 6.6% inhibition of control (no ACC). This research suggested the relationship between phytochrome and gravitropic response through an ethylene production.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.28-30
• /
• 2017

Purpose Anti-Glutamic acid decarboxylase antibody test (GAD Ab) has been used as a predictor of type 1 diabetes. GAD Ab has also been shown to be highly potent in cerebrospinal fluid (CSF) of patients with suspected diabetic peripheral neuropathy. Recently, it has been known that clinical significance of GAD Ab using CSF is useful for the neurological disorders. However, the reference value of anti-GAD Ab has been provided only for serum. In this experiment, we estimated the reference value of anti-GAD antibody for CSF in neurological patients. Materials and Methods A total of 211 neurological patients were enrolled. Serum and CSF were analyzed by radioimmunoassay (RIA) using commercial RIA anti-GAD Ab kit (RSR, London, United Kingdom). Normal saline was used as the normal CSF control because CSF is most similar to 0.9% normal saline. Results The mean value of normal CSF control was 1.97 U/mL, and two standard deviations (2SD) was 1.44 U/mL. Based on this data, the expected reference range of CSF could be estimated from 0.54 U/mL to 3.40 U/mL Conclusion The reference range of normal CSF control using normal saline obtained with Hoffmann's method. However, there will be a need to validate the CSF reference values using human normal CSF.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.71.1-71.1
• /
• 2013

Among quadruples or higher multiplicity stars, only a few binary systems have been discovered. They are important targets to understand the formation and evolution of multiple stellar systems because we can obtain accurate stellar parameters from photometric and spectroscopic studies. We present the observational results of this kind of rare object 1SWASP J093010.78+533859.5, for which the doubly eclipsing feature had been detected previously from the SuperWASP photometric archive. Individual PSF photometry for two objects with a separation of about 1.9 arcsec was performed for the first time in this study. Our time-series photometric data show that the brighter object A is an Algol-type detached eclipsing binary with an orbital period of 1.3 days and the fainter B is a W UMa-type contact eclipsing binary with a period of 0.23 days. Using the high-resolution optical spectra, we obtained well-defined radial velocity variations of the system A. Furthermore, stationary spectral lines were detected and should have originated from the other stellar component, which was confirmed by the third object contribution from the light curve analysis. No spectral feature of the system B was detected, probably due to its faintness. We obtained the binary parameters and the absolute dimensions from each light curve synthesis. The primary and secondary components of the system A have a spectral type of K1 and K5 main sequences, respectively. Two components of system B have nearly the same type of K3 main sequence. Light variations at out of eclipses were appeared in both systems, interpreting as the effect of stellar spots on these late spectral type stars. We estimated the distances to the systems A and B individually. They may have similar distances of about 70 pc and seem to be gravitationally bound with a separation of about 130 AU. In conclusion, we suggest that 1SWASP J093010.78+533859.5 is a quintuple stellar system with a hierarchical structure of a triple system A(ab)c and a binary system B(ab).

• Journal of Veterinary Clinics
• /
• v.25 no.4
• /
• pp.227-230
• /
• 2008

To determine the distribution of feline blood types and then to estimate the risk of neonatal isoerythrolysis (NI) in non-pedigree cats, we typed blood of 482 cats of both genders and various breeds (336 domestic shorthair cat and 146 pedigree) from August 2005 through July 2007. Blood samples from Seoul and Kangwon province were typed within 5 days after collection by the simple tube method. High-titer anti-A antiserum and anti-B reagent, prepared with Triticum vulgaris lectin, were used to determine type A and type B blood, respectively. The majority of cats were type A (n = 465, 96.5%) and only 3.5% (n = 17) were type B. No type AB blood were detected. Blood type distributions among the non-pedigree and pedigree cats were similar: for non-pedigree cats, 96.4% were type A and 3.6% were type B, whereas for pedigree cats, 96.6% were type A and 3.4% were type B. All type B cats had a very strong agglutination reaction to anti-A antiserum: 8 sample for 3+ and 9 for 4+. Assuming 19% of estimated frequency for the type-B allele in domestic cats, the calculated proportion of random mating from this population at risk for developing NI was 3.4%. Based on this finding, it is strongly recommended that blood typing be performed prior to any blood transfusion or breeding to minimize blood type incompatibilities. Further comprehensive studies on the titer of naturally occurring antibodies in cat populations in Korea and the prevalence of possible NI in practice are clearly required.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.121-126
• /
• 2000

The effect of electroless Ni and Cu plating on $LaNi_5$, $AB_5$ type hydrogen storage alloy was investigated by the various electrochemical techniques such as constant current charge-discharge test, cyclic voltammeoy, and a.c. impedance spectroscopy. Scanning electron microscopy and X-ray diffraction test were conducted for phenomenological logical analyses. Cyclic Voltammetry results show that activation characteristics, cycle life and reaction ,rate were improved through electroless Ni and Cu plating. Compared with bare $LaNi_5$ the charge transfer resistance of electrode was greatly reduced as charge-discharge cycle increases. Therefore, electroless Ni and Cu plating on $LaNi_5$ alloy tends to accelerate the early activation, increasing the cyclic lift of electrode.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.678-683
• /
• 2010

The drum cam with rotational follower is used to apply the ATC and index table of machine tools and it has the merit of minimizing the backlash. In general, to machine the drum cam with rotational follower, 5-axis CNC machine must be used and its kinematic principle must be included in modeling on CAM. So, the commercialized CAM software can't be applied to this machining of drum cam. Though some special software for machining drum cam was developed, it could be applied to special 5-axis CNC machine tools and the finish machining module was not applied. To solve this problem, this study includes the induction of the post processing algorithm for the rough machining of drum cam on several 5-axis CNC machine tools, type AC, AB and Be. The finish machining software will be treated in next study. A sample drum cam was machined on 5-axis CNC machine tool of AC type. The designed geometric profile of drum cam consist to the measured profile after machining well. This post processing algorithm for rough machining of the drum cam was clearly verified.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.5 no.1
• /
• pp.133-142
• /
• 1992

We analyzed clinical study in 47 patients, who had visited to the Dept. of Otolaryngology, Hospital of Oriental Medicine, Kyung Hee University to treat Otitis media with effesion from March, 1991 to February, 1992. The clinical etiology of O.M.E. was tubal occlusion, acute otitis, and allergy. The clinical symptoms were hearing loss, tinnitus, sneezing, coughing, Chun-I(纏耳), and BEE-Yeon(鼻淵) in the Oriental Medicine. The results were as follows. 1. There were 26 males ($55\%$) and 21 females ($45\%$) in sex. 2. The peak age at onset was 1-4 years old (11Cases). 3. Bilateral effusion was in $62\%$, and unilateral in $38\%$. 4. The etioloigic factors were upper respiratory infection 16 cases, Allergic rhinitis 13 cases, Sinusitis 8 cases, etc. 5. The most common chief complaint was hearing loss ($30\%$). 6. There was no significant difference between blood types in O.M.E., ( A type $30\%,\;B\;type\;25\%,\;AB\;type\;13\%,\;0\;type\;13\%$, Unknown recorded $9\%$ ). 7. $21\%$ patients prefered warm and the others cold 8. As for digestion, good was in 31 cases ($81\%$), and poor 9 cases ($19\%$). 9. Man-Hyung-Ja-San Extract was most used in treatments as $38\%$, O-Ryung-San $35\%$ in descending order. 10. As for treatment period, 14 cases were treated over 12 weeks, 9 cases below 1 week

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.684-690
• /
• 2010

A drum cam with rotational follower has a cam mechanism and it is mainly used in its application such as index table and ATC of machine tool. Also its use can reduce the backlash in its kinematic movement. To machine the drum cam with rotational follower, 5-axis CNC machine tool is generally used and its kinematic principle is included in it's design. Until now, the commercialized CAM software can't cover the application of the drum cam machining. Even if, some special software was developed for machining a drum cam, the post processing method for finish machining was not developed yet. And to overcome the problem, the form tool is still used on the tool path of rough machining. This study includes the induction of the post processing technique for the finish machining of drum cam on three 5-axis CNC machine tools, type AC, AB and BC. To prove the finishing geometric profile, the result was clearly verified through inspection and geometric measurement after direct machining of the drum cam in AC type 5-axis machine tool in this study.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.556-561
• /
• 2016

This paper describes implementation of a 13.56 MHz, 5 kW RF high power generator for ISM band applications. This RF generator consists of four LDMOS modules of 1.25kW class-AB push-pull power amplifier with drive amplifier and its outputs are combined by using Wilkinson type transmission-line transformers. Its generator has a high efficiency and output power better than linearity. In order to discharge power transistor heats, we used on water cooled copper plate. Also, these have a composite circuit of combiner and low-pass filter and safety circuit to detector over and reflected power. The RF generator has achieved a efficiency of 79 % at 5.33 kW of saturated power level experimentally.

• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.3
• /
• pp.177-189
• /
• 2001

T hydrogen absorption-desorption behavior induced by thermal or hydrogen pressure cycling in a closed system was observed in hydrogen storage alloys, $(La-R-Mm)Ni_{4.5}Fe_{0.5}$, $MmNi_4Fe_{0.85}Cu_{0.15}$ and $(Ce-F-Mm)Ni_{4.7}Al_{0.2}Fe_{0.1}$. Thereby (La-R-Mm), Mm and (Ce-F-Mm) refer to La-rich mischmetal, mischmetal and Ce-free mischmetal respectively. As the results, it is found that the alloy stabilities during thermal cycling varies with alloy composition change. The highest stability occurs in $MmNi_4Fe_{0.85}Cu_{0.15}$ and the lowest stability in $(La-R-Mm)Ni_{4.5}Fe_{0.5}$. Comparing hydrogen pressure cycling with thermal cycling, pressure cycling causes severer degradation of the alloy $(Ce-F-Mm)Ni_{4.7}Al_{0.2}Fe_{0.1}$ than thermal cycling. When the 1500 times-cycled alloy is annealed at $400^{\circ}C$ for 3hrs under 1 atm of hydrogen pressure the hydrogen storage capacity is recovered only partially but not completely to the initial capacity. The amount of capacity loss after annealing is larger in the hydrogen pressure cycled samples than in the thermal cycled, suggesting an incoming of impure gas during hydrogen pressure cycling.