• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.734-741
• /
• 1999

Al2O3와 t-ZrO2 분말의 압분체를 공기중 150$0^{\circ}C$ 및 1$600^{\circ}C$에서 2시간 소결하여 제조된 입자복합체의 미세구조와 기계적 성질을 조사하였다. 소수의 미세한 구상의 ZrO2입자는 Al2O3의 입내에 존재하였으나 대분분은 입계에 존재하여 Al2O3의 입계를 고정시키는 것이 가능하였고, 따라서 Al2O3의 입성장을 둔화시켰다. 소결할 동안 입계 ZrO2 입자의 조대회는 응집된 ZrO2 입자내에서의 입계의 소멸과 Al2P3 입계의 이동에 의해서 끌어 당겨진 ZrO2 입자의 합체(coalescence)에 의해서 일어날 수 있었다. ZrO2의 첨가에 의한 Al2O3의 기계적 성질의 변화는 기지상인 Al2O3의 미세구조와 분산된 ZrO2 입자의 크기와 구조에 의존하였다.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.604-611
• /
• 2000

Glass-ceramics containing a cordierite (2MgO-2Al2O3-5SiO2) as a main crystal phase was prepared from MgO-Al2O3-SiO2 system glass through a controlled 2-step heat treatment for the application to magnetic memory disk substrate for higher storage capacity. Parent glasses prepared with addition of CeO2 as a fulx and TiO2 as a nucleating agent were crystallized by a 2-step heat treatment i.e. nucleation and crystal grwoth. Then the maximum nucleation and crystal growth rates were investigated and several properties such as bending strength, surface hardness and surface roughness were also studied for heat treated glass. As a result, only a $\alpha$-cordierite was precipitated as a main crystal phase for all heat treatment conditions and the maximum nucleation and crystal growth rates were 2.4$\times$109/㎣.hr at 80$0^{\circ}C$ and 0.3${\mu}{\textrm}{m}$/hr at 915$^{\circ}C$ respectively. After being nucleated at 80$0^{\circ}C$ for 5 hours and then crystallized at 915$^{\circ}C$ for 1 hour, the heat treated glass had a crystal volume fraction of 17.6% and crystal size fo 0.3${\mu}{\textrm}{m}$, and showed the optimum properties for the application to magnetic memory disk substrates as follows. ; Bending strength of 192 MPa, Vidkers hardness of 642.1kgf/$\textrm{mm}^2$, and surface roughness of 27$\AA$.

• Journal of Information Technology Applications and Management
• /
• 제26권2호
• /
• pp.41-60
• /
• 2019

O2O(Online-to-Offline) commerce, a kind of multi-channel, is used in various industries such as accommodation, food and beverage, transportation, and real estate. The O2O commerce, a channel of integrating online and offline, overcomes the limitations of traditional online commerce, where a customer made a purchase decision without direct experience. Despite this advantage of O2O, if the online-offline channel is not effectively linked, customer's complaints would occur due to service failure. This study, with regard to O2O service failure circumstances, intends to investigate the effect of customer's perceived justice on their emotional response, recovery satisfaction, followed by intention to repurchase. Perceived justice in this study is composed of distributive justice, interactional justice, and procedural justice. Furthermore, this study explores the moderation effect of O2O industry types in the relationship between perceived justice and emotion. An O2O industry type is classified into accommodation, food and beverage, and transportation. A hypothesized research model was empirically tested using a structural equation model. The current study collected 433 questionnaires and the target respondents are customers who have experienced service failure in O2O commerce. The empirical results showed that O2O commerce more effectively conducts service recovery strategy and causes positive customer response by integrating online and offline channel. One of the ultimate purposes of O2O service providers is to reduce the likelihood of service failures and to recover more quickly and efficiently by linking two channels rather than using a single channel. This study suggested that the O2O channel is effective in influencing customer satisfaction and loyalty by inducing customer's positive emotions in recovering service failure.

• 한국결정성장학회지
• /
• 제31권1호
• /
• pp.1-7
• /
• 2021

Ga2O3의 준 안정상인 ε-Ga2O3는 육각형 구조나 준 육각형 구조를 가지는 기판들과 정합성이 우수하여 β-Ga2O3보다 상대적으로 쉽게 낮은 표면 거칠기와 결함 밀도를 갖는 박막을 얻을 수 있다. 이에 ε-Ga2O3를 고온에서 열처리하면 β-Ga2O3로 상전이 되는 특성을 이용하여 표면 거칠기와 결함 밀도가 낮은 고품질 β-Ga2O3 박막의 제조를 시도하였다. 이를 위해서는 고품질 ε-Ga2O3 박막의 성장이 선행되어야 하므로 본 연구에서는 갈륨과 산소의 공급 유량 비율에 따른 Ga2O3 박막의 구조적, 형태적 특성을 분석함으로써 최적의 유량 비율을 조사하였다. 추가로 열처리 조건과 ε-Ga2O3 박막에 혼입된 β-Ga2O3가 상전이 이후 β-Ga2O3의 결정성에 미치는 영향도 함께 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1912-1920
• /
• 2011

The $SnO_2$ with a particle size of about 300 nm instead of Ni is used in this study to overcome rapid catalytic deactivation by the formation of a $NiAl_2O_4$ spinal structure on the conventional Ni/${\gamma}$-$Al_2O_3$ catalyst and simultaneously impregnated the catalyst with potassium (K). The $SnO_2-K_2O$ impregnated Zeolite Y catalyst ($SnO_2-K_2O$/ZY) exhibited significantly higher ethanol reforming reactivity that that achieved with $SnO_2$ 100 and $SnO_2$ 30 wt %/ZY catalysts. The main products from ethanol steam reforming (ESR) over the $SnO_2$-$K_2O$/ZY catalyst were $H_2$, $CO_2$, and $CH_4$, with no evidence of any CO molecule formation. The $H_2$ production and ethanol conversion were maximized at 89% and 100%, respectively, over $SnO_2$ 30 wt %-$K_2O$ 3.0 wt %/ZY at 600 $^{\circ}C$ for 1 h at a $CH_3CH_2OH:H_2O$ ratio of 1:1 and a gas hourly space velocity (GHSV) of 12,700 $h^{-1}$. No catalytic deactivation occurred for up to 73 h. This result is attributable to the easier and weaker of reduction of Sn components and acidities over $SnO_2-K_2O$/ZY catalyst, respectively, than those of Ni/${\gamma}$-$Al_2O_3$ catalysts.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.68-74
• /
• 2018

All transparent UV photodetector based on ZnO was fabricated with structure of NiO/ZnO/$SnO_2$/ITO by using RF and DC magnetron sputtering system. ZnO was deposited with 4 inch ZnO target (purity 99.99%) for a quality film. In order to build p-n junction up, p-type NiO was formed on n-type ZnO by using reactive sputtering method. The indium tin oxide (ITO) which is transparent conducting oxide (TCO) was applied as a transparent electrode for transporting electrons. To improve the UV photodetector performance, a functional $SnO_2$ layer was selected as an electron transporting and hole blocking layer, which actively controls the carrier movement, between ZnO and ITO. The photodetector (NiO/ZnO/$SnO_2$/ITO) shows transmittance over 50% as similar as the transmittance of a general device (NiO/ZnO/ITO) due to the high transmittance of $SnO_2$ for broad wavelengths. The functional $SnO_2$ layer for band alignment effectively enhances the photo-current to be $15{\mu}A{\cdot}cm^{-2}$ (from $7{\mu}A{\cdot}cm^{-2}$ of without $SnO_2$) with the quick photo-responses of rise time (0.83 ms) and fall time (15.14 ms). We demonstrated the all transparent UV photodetector based on ZnO and suggest the route for effective designs to enhance performance for transparent photoelectric applications.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.140-144
• /
• 2018

$ZnO/TiO_2$ nanocomposites were synthesized via a modified sol-gel technique by incorporating 30 and 70 wt% $TiO_2$ nanopowder into a ZnO sol-gel matrix. Zinc acetate dihydrate was used as the ZnO precursor and de-ionized water as the solvent, while titanium oxysulfate was employed for the synthesis of $TiO_2$ nanopowder. The synthesized $ZnO/TiO_2$ nanocomposites were characterized by x-ray diffraction, UV-vis spectroscopy, scanning electron microscopy, and transmission electron microscopy. The $ZnO/TiO_2$ nanocomposites showed both the ZnO (wurtzite) and $TiO_2$ (anatase) phases. The average ZnO crystallite size of the $ZnO/TiO_2$ nanocomposites was found to be about 26.3 nm. The TEM results confirmed that spherical $TiO_2$ particles were embedded in the ZnO matrix. $TiO_2$ particles attached onto the rod-like ZnO particles were also observed. The $ZnO/TiO_2$ nanocomposites exhibited optical absorption properties superior to those of pure ZnO and $TiO_2$.

• Bulletin of the Korean Chemical Society
• /
• 제18권8호
• /
• pp.831-840
• /
• 1997

Core/shell structured composite metal oxides of Fe2O3/MgO were prepared by thermal decomposition of Fe(acac)3 adsorbed on the surface of MgO cores. The morphology of the composites conformed to that of the MgO used as the cores. Broad powder X-ray diffraction peaks shifted toward larger d, large BET surface area (∼350 m2/g), and the size of crystalline domains in nano range (4 nm), all corroborate to the nanocrystallinity of the Fe2O3/MgO composite which was prepared by using nanocrystalline MgO as the core. By use of microcrystalline MgO as the core, microcrystalline Fe2O3/MgO composite was prepared, and it had small BET surface area of less than 35 m2/g. AFM measurements on nanocrystalline Fe2O3/MgO showed a collection of spherical aggregates (∼80 nm dia) with a very rough surface. On the contrary, microcrystalline Fe2O3/MgO was a collection of plate-like flat crystallites with a smooth surface. The nitrogen adsorption-desorption behavior indicated that microcrystalline Fe2O3/MgO was nonporous, whereas nanocrystalline Fe2O3/MgO was mesoporous. Bimodal distribution of the pore size became unimodal as the layer of Fe2O3 was applied to nanocrystalline MgO. The macropores in a wide distribution which the nanocrystalline MgO had were absent in the nanocrystalline Fe2O3/MgO. The decomposition of CCl4 was largily enhanced by the overlayer of Fe2O3 on nanocrystalline MgO making the reaction between nanocrystalline Fe2O3/MgO and CCl4 be nearly stoichiometric. The reaction products were environmentally benign MgCl2 and CO2. Such an enhancement was not attainable with the microcrystalline samples. Even for the nanocrystalline MgO, the enhancement was not attained, if not with the Fe2O3 layer. Without the layer of Fe2O3, it was observed that the nanocrystalline domain of the MgO transformed into microcrystalline one as the decomposition of CCl4 proceeded on its surface. It appeared that the layer of Fe2O3 on the particles of nanocrystalline Fe2O3/MgO blocked the transformation of the nanocrystalline domain into microcrystalline one. Therefore, in order to attain stoichiometric reaction between CCl4 and Fe2O3/MgO core/shell structured composite metal oxide, the morphology of the core MgO has to be nanocrystalline, and also the nanocrystalline domains has to be sustained until the core was exhausted into MgCl2.

• 한국산학기술학회논문지
• /
• 제3권2호
• /
• pp.89-93
• /
• 2002

PbO 함유 다성분계유리 및 파이버를 제조하였으며, PbO함유 유리는 이중도가니법(double crucible methodo에 의한 높은 개구수를 갖는(high-numerical aperture : N.A.) 광파이버(optical fiber) 제조에 적합하였다. 본 실험에 있어서는 SiO₂, PbO를 주성분으로 하고 K₂O, Na₂O, B₂O₃, A1₂O₃등의 산화물을 적량 배합하였으며, 또한 double crucible method에 의해 제조된 파이버의 광학적, 기계적 및 구조적 특성을 관찰하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제46권4호
• /
• pp.189-196
• /
• 2019

Objective: We aimed to evaluate the effects of different oxygen conditions (20% [high O₂], 5% [low O₂] and 5% decreased to 2% [dynamic O₂]) on mouse pre- and peri-implantation development using a novel double-channel gas supply (DCGS) incubator (CNC Biotech Inc.) to alter the oxygen concentration during in vitro culture. Methods: The high-O₂ and low-O₂ groups were cultured from the one-cell to the blastocyst stage under 20% and 5% oxygen concentrations, respectively. In the dynamic-O₂ group, mouse embryos were cultured from the one-cell to the morula stage under 5% O₂ for 3 days, followed by culture under 2% O₂ to the blastocyst stage. To evaluate peri-implantation development, the blastocysts from the three groups were individually transferred to a fibronectin-coated dish and cultured to the outgrowth stage in droplets. Results: The blastocyst formation rate was significantly higher in the low-O₂ and dynamic-O₂ groups than in the high-O₂ group. The total cell number was significantly higher in the dynamic-O₂ group than in the low-O₂ and high-O₂ groups. Additionally, the apoptotic index was significantly lower in the low-O₂ and dynamic-O₂ groups than in the high-O₂ group. The trophoblast outgrowth rate and spread area were significantly higher in the low-O₂ and dynamic-O₂ groups than in the high-O₂ group. Conclusion: Our results showed that a dynamic oxygen concentration (decreasing from 5% to 2%) had beneficial effects on mouse pre- and peri-implantation development. Optimized, dynamic changing of oxygen concentrations using the novel DCGS incubator could improve the developmental competence of in vitro cultured embryos in a human in vitro fertilization and embryo transfer program.